Engine parts cheap DFW pick up only - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ratrod67 · 12-19-2003, 08:50 PM

Need this stuff gone.

SBC heads:
14022601-> 80-86 305 58cc -set
3986339X-> 71 350 74cc- set **SOLD**
3973487-> 71-72 350 LT1 75cc- 1 only

BBC heads:**SOLD**

SBC cranks:
3941174 with balancer-> 307 cast 3.25 stroke
3932442-> 350 cast 3.48 stroke
3932442-> 350 cast 3.48 stroke
3911001-> 307-327 cast 3.25 stroke

BBC crank:
3533039-> 454 cast 10/10

SBC block with no main caps:
14010201-> 80-85 2 bolt 305

1 Q-jet carb

1 Q-jet cast intake # 346250

1 T-5 5 speed tranny and bellhousing. It has 1 mounting ear broken off and leaks at the break. Still shifts good

1 98 LS1 block with a nice hole in the side **SOLD**

Chevyguy111786 · 12-19-2003, 09:01 PM

Prices?

ratrod67 · 12-19-2003, 09:12 PM

I have no clue as to prices. It just needs to go away. I'm tired of moving this stuff around and tripping over it. All parts would need to be checked and possibly need work. I'm definately ready to deal on this stuff.

bbs1965 · 12-19-2003, 09:24 PM

301 Corinth St
Dallas, TX 75207-4905 Phone: (214) 565-9739

ratrod67 · 12-19-2003, 09:39 PM

Thanks Shane. Sent you a PM.

krazy_texan · 12-19-2003, 10:34 PM

what do you mean by ls1 with nice hole in the side do you have pics

ratrod67 · 12-19-2003, 10:47 PM

Look close.

ratrod67 · 12-19-2003, 10:48 PM

inside

ratrod67 · 12-19-2003, 10:49 PM

Rod that did the damage.

low 84 · 12-20-2003, 02:39 AM

how much do you want for the trashed ls1 block?

smoky02 · 12-20-2003, 07:27 PM

how much do you want for a good one piece rear main seal crank shaft

ratrod67 · 12-22-2003, 12:54 PM

TTT

*botboy* · 12-22-2003, 01:58 PM

For what engine does the T-5 bellhousing bolt to? How much do you want for it? Could I pay you to make it worth your while to ship it to MN?

smoky02 · 12-22-2003, 02:00 PM

T-5 bellhousing will work with a 350, but you need to have it built before you putting them together, the 350 is too strong for that tranny

ratrod67 · 12-23-2003, 12:50 AM

I had the T-5 behind a 502 big block. That's how it got the broken ear

If it dosen't sell local, I'll ship the bellhousing. I'd like to give it a little while if you don't mind. Thanks!

12-19-2003, 08:50 PM	#1
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Engine parts cheap DFW pick up only Need this stuff gone. SBC heads: 14022601-> 80-86 305 58cc -set 3986339X-> 71 350 74cc- set SOLD 3973487-> 71-72 350 LT1 75cc- 1 only BBC heads:SOLD SBC cranks: 3941174 with balancer-> 307 cast 3.25 stroke 3932442-> 350 cast 3.48 stroke 3932442-> 350 cast 3.48 stroke 3911001-> 307-327 cast 3.25 stroke BBC crank: 3533039-> 454 cast 10/10 SBC block with no main caps: 14010201-> 80-85 2 bolt 305 1 Q-jet carb 1 Q-jet cast intake # 346250 1 T-5 5 speed tranny and bellhousing. It has 1 mounting ear broken off and leaks at the break. Still shifts good 1 98 LS1 block with a nice hole in the side SOLD Last edited by ratrod67; 12-24-2003 at 06:12 PM.

12-19-2003, 09:24 PM	#4
bbs1965 Open Sundays 10 till 10 Join Date: Nov 2000 Location: Waxahachie,Texas 75165 Posts: 1,009	try bishops 301 Corinth St Dallas, TX 75207-4905 Phone: (214) 565-9739 __________________ 817-846-5476 parts for sale always 30 minutes south of Dallas on I35 WWW.BBSAutoSalvage.com bbs1969@direcway.com

12-19-2003, 10:34 PM	#6
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	what do you mean by ls1 with nice hole in the side do you have pics __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

12-19-2003, 10:47 PM	#7
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Look close. Attached Images

12-19-2003, 10:48 PM	#8
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	inside Attached Images

12-19-2003, 09:01 PM	#2
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Prices?

12-19-2003, 09:12 PM	#3
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	I have no clue as to prices. It just needs to go away. I'm tired of moving this stuff around and tripping over it. All parts would need to be checked and possibly need work. I'm definately ready to deal on this stuff.

12-19-2003, 09:39 PM	#5
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Thanks Shane. Sent you a PM.

12-19-2003, 10:49 PM	#9
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Rod that did the damage. Attached Images

12-20-2003, 02:39 AM	#10
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	how much do you want for the trashed ls1 block? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

12-20-2003, 07:27 PM	#11
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	how much do you want for a good one piece rear main seal crank shaft __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

12-22-2003, 12:54 PM	#12
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	TTT

12-22-2003, 01:58 PM	#13
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	For what engine does the T-5 bellhousing bolt to? How much do you want for it? Could I pay you to make it worth your while to ship it to MN?

12-22-2003, 02:00 PM	#14
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	T-5 bellhousing will work with a 350, but you need to have it built before you putting them together, the 350 is too strong for that tranny __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

12-23-2003, 12:50 AM	#15
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	I had the T-5 behind a 502 big block. That's how it got the broken ear If it dosen't sell local, I'll ship the bellhousing. I'd like to give it a little while if you don't mind. Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.