|
07-09-2012, 11:16 PM
|
#26 |
|
Registered User
Join Date: Jun 2011
Location: Russellville AR
Posts: 84
|
Re: '67 Keg Sled
Did some more work on my Z.
     Put a coat of paint on some of it and started my mock up. Still have to do a little plating on the inside of the back of the frame.  Got to do a little more to the steering linkage to get some more clearance above the upper control arm. I have figured out how I just need to get a short piece of spine shaft. |
|
|
|
07-09-2012, 11:24 PM
|
#27 |
|
67cheby
 
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: '67 Keg Sled
Looking good
Posted via Mobile Device |
|
|
|
|
07-09-2012, 11:48 PM
|
#28 |
|
Registered User
Join Date: Mar 2012
Location: Payette Idaho
Posts: 136
|
Re: '67 Keg Sled
looking good I thought about doing the z you made it look easy how bad was it? you are defineately picking the right time to do it i still haven't decided weather to z mine or save up for a dropmember
__________________
Respect Your Elders especially if they are chevy's |
|
|
|
|
07-09-2012, 11:48 PM
|
#29 |
|
Registered User
Join Date: Jan 2012
Location: Santa Barbara, California/Tuscaloosa, Alabama
Posts: 87
|
Re: '67 Keg Sled
Love It! Full speed ahead
|
|
|
|
|
07-10-2012, 12:18 AM
|
#30 |
|
Registered User
Join Date: Jun 2011
Location: Russellville AR
Posts: 84
|
Re: '67 Keg Sled
I cant afford a drop member right now so I went this way.
It wasnt hard at all did it by myself with a floor jack and couple sets of jack stands. Got it cut and tack welded in just a couple hours. |
|
|
|
|
07-11-2012, 12:29 AM
|
#31 |
|
Registered User
Join Date: Jun 2011
Location: Russellville AR
Posts: 84
|
Re: '67 Keg Sled
Picked up a serpentine setup tonight and it wont clear my TPI setup. Well guess back to v belts I go.
|
|
|
|
|
02-12-2013, 11:36 PM
|
#32 |
|
Registered User
Join Date: Jun 2011
Location: Russellville AR
Posts: 84
|
Re: '67 Keg Sled
Well its been a while since I have done anything. I moved so I havent worked on the truck since. I pot my 307 for sale and it might get picked up this weekend. If it does I will be picking up a 6.0 I found as long as it stayed put. Will also get my drop spindles and and install them. Hopefully tunnel my trans so I can drop the engine and trans in too.
|
|
|
|
|
02-04-2014, 05:00 PM
|
#33 |
|
Registered User
Join Date: Jun 2011
Location: Russellville AR
Posts: 84
|
Re: '67 Keg Sled
It's been a while since I have posted anything on here. I was out of town for work for about 8 months or so. Ended up coming back end of July 2013. Wound up getting a divorce in Oct. still have the truck just haven't had funds to do much. I do have my 6 lug rotors I just have to get bearings and new spindles. Had to sell mine to cover things to get by. I have picked up a pair of leather Mitsubishi eclipse bucket seats for it. The 6.0 fell through and after a bunch of research I have decided to go with a late model 8.1 and t56 speed manual trans. Once I get back on my feet after this divorce is done I start back on it.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
