Any interest in lifted Prerunner lowere A arms? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 01-19-2014, 11:13 PM

Let me start by saying this isn't a for sale thread. I am just looking for advice at this time. I know these are really hard to come by for the 2wd c10 trucks as no one is making them anymore. I came up with a set at the wrecking yard a month or so back. I am trying to decide if it is worth having a couple sets of these fabricated or just selling the set I have with the coil springs. I just figured no one was making these and it seems there is some interest. The vehicle these came off of had 32" tires. I don't know a lot about this stuff but I have a good friend that builds trophy trucks that could fab some up. I just don't see using any of these myself. I don't know what pairs of these would cost as I didn't want to put too much effort into it without any interest.

**Willowrun** · 01-20-2014, 12:09 AM

Interested here.

Eyegore · 01-20-2014, 12:11 AM

Can I ask what type truck they were on? My son had some made for his truck possibly 78 shortbed. Truck was totaled years ago and we never knew what happened to it after the insurance towed it away.

Tom

**1774btcrew** · 01-20-2014, 12:23 AM

Quote:

Originally Posted by Eyegore

Can I ask what type truck they were on? My son had some made for his truck possibly 78 shortbed. Truck was totaled years ago and we never knew what happened to it after the insurance towed it away.

Tom

Tom, these were on a 81 up Suburban. I pulled a set a while back off a red 80 and earlier shortbed but they were Fabtech

andrewmp6 · 01-20-2014, 01:27 AM

We do have people asking now and then about lifting a 2wd truck on here.I think you could sell them but no clue on how many sets you would move a year.

**1774btcrew** · 01-20-2014, 01:35 AM

Quote:

Originally Posted by andrewmp6

We do have people asking now and then about lifting a 2wd truck on here.I think you could sell them but no clue on how many sets you would move a year.

I am not sure either! This aren't long travel arms but I was told this is how it was done back in the day. These arms with 3/4 ton upper A arms

INSIDIOUS '86 · 01-20-2014, 02:32 AM

You have any pics?

chevymadness · 02-05-2014, 02:55 AM

Quote:

Originally Posted by 1774btcrew

Let me start by saying this isn't a for sale thread. I am just looking for advice at this time. I know these are really hard to come by for the 2wd c10 trucks as no one is making them anymore. I came up with a set at the wrecking yard a month or so back. I am trying to decide if it is worth having a couple sets of these fabricated or just selling the set I have with the coil springs. I just figured no one was making these and it seems there is some interest. The vehicle these came off of had 32" tires. I don't know a lot about this stuff but I have a good friend that builds trophy trucks that could fab some up. I just don't see using any of these myself. I don't know what pairs of these would cost as I didn't want to put too much effort into it without any interest.

Heck yea I would be interested im looking to get on on a 4 inch to 6 inch lift.My truck has 32 inch enduro mud tires and perfect for this project.The shops I have went to are totally oblivious to the fact that there are no lifts its almost comical and insulting and frustrating!TELL ME MORE

chevymadness · 02-05-2014, 02:56 AM

Quote:

Originally Posted by INSIDIOUS '86

You have any pics?

Yes pics!

01-19-2014, 11:13 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Any interest in lifted Prerunner lowere A arms? Let me start by saying this isn't a for sale thread. I am just looking for advice at this time. I know these are really hard to come by for the 2wd c10 trucks as no one is making them anymore. I came up with a set at the wrecking yard a month or so back. I am trying to decide if it is worth having a couple sets of these fabricated or just selling the set I have with the coil springs. I just figured no one was making these and it seems there is some interest. The vehicle these came off of had 32" tires. I don't know a lot about this stuff but I have a good friend that builds trophy trucks that could fab some up. I just don't see using any of these myself. I don't know what pairs of these would cost as I didn't want to put too much effort into it without any interest. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

01-20-2014, 12:09 AM	#2
Willowrun Senior Member Join Date: Mar 2013 Location: Ann Arbor, MI Posts: 1,029	Re: Any interest in lifted Prerunner lowere A arms? Interested here.

01-20-2014, 12:11 AM	#3
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: Any interest in lifted Prerunner lowere A arms? Can I ask what type truck they were on? My son had some made for his truck possibly 78 shortbed. Truck was totaled years ago and we never knew what happened to it after the insurance towed it away. Tom __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

01-20-2014, 01:27 AM	#5
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Any interest in lifted Prerunner lowere A arms? We do have people asking now and then about lifting a 2wd truck on here.I think you could sell them but no clue on how many sets you would move a year.

01-20-2014, 02:32 AM	#7
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Any interest in lifted Prerunner lowere A arms? You have any pics? __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.