Bed dimensions needed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thumpt · 02-05-2014, 10:14 PM

Hi Guys I'm going to do a stainless steel bed which will lay over 12mm marine ply. I'm after the exact measurements showing as much detail as possible and it would be very handy if it was in a cad drawing set up. I know that this is probably asking a lot but I thought I would try here first.
Thanks Mark.

Lanman1972 · 02-05-2014, 10:52 PM

I did a drawing on Autocad using info from www.Mar-K.com. All dimensions were on the site.

02-05-2014, 10:14 PM	#1
Thumpt Registered User Join Date: Mar 2012 Location: Melbourne Victoria Posts: 35	Bed dimensions needed. Hi Guys I'm going to do a stainless steel bed which will lay over 12mm marine ply. I'm after the exact measurements showing as much detail as possible and it would be very handy if it was in a cad drawing set up. I know that this is probably asking a lot but I thought I would try here first. Thanks Mark.

02-05-2014, 10:52 PM	#2
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: Bed dimensions needed. I did a drawing on Autocad using info from www.Mar-K.com. All dimensions were on the site.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.