'72 4x4 Dana 44 spindles... anywhere? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joeydurango · 02-07-2014, 03:25 PM

Hey all. In need of a set of Dana 44 spindles for my '72 K10. Having a hell of a time finding these... no one has new ones that I've found, even the specialty guys. Can find lots of '73 and up spindles, but not the older ones. Anyone know a source for this kind of thing? Or does anyone know of a work-around using a different D44 spindle and bearing combo, without replacing the rotors? Thanks!

**CUSTOM/10** · 02-07-2014, 03:35 PM

You can use the 73 and up, ( Even from corp 10 bolts ) but you have to use the hub and spindle as a unit because the bearings are different sizes.

Gary

joeydurango · 02-07-2014, 05:48 PM

Thanks! Do you know if the '72 rotors will work on a '73 hub?

**CUSTOM/10** · 02-07-2014, 06:21 PM

That I can't answer. When I did mine I swapped rotors also !

joeydurango · 02-07-2014, 06:33 PM

No worries, thanks anyway! Anyone else have any suggestions?

ryanroo · 02-07-2014, 08:51 PM

Man, i scrap yarded a 72 d44 a few months ago. would have been great for this...

i would bet a dollar the rotors are the same.

joeydurango · 02-07-2014, 09:03 PM

What!? And you the only other Durango guy I know on here?! That would've been too easy... shucks.

02-07-2014, 03:25 PM	#1
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 825	'72 4x4 Dana 44 spindles... anywhere? Hey all. In need of a set of Dana 44 spindles for my '72 K10. Having a hell of a time finding these... no one has new ones that I've found, even the specialty guys. Can find lots of '73 and up spindles, but not the older ones. Anyone know a source for this kind of thing? Or does anyone know of a work-around using a different D44 spindle and bearing combo, without replacing the rotors? Thanks!

02-07-2014, 03:35 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: '72 4x4 Dana 44 spindles... anywhere? You can use the 73 and up, ( Even from corp 10 bolts ) but you have to use the hub and spindle as a unit because the bearings are different sizes. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-07-2014, 05:48 PM	#3
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 825	Re: '72 4x4 Dana 44 spindles... anywhere? Thanks! Do you know if the '72 rotors will work on a '73 hub?

02-07-2014, 06:21 PM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: '72 4x4 Dana 44 spindles... anywhere? That I can't answer. When I did mine I swapped rotors also ! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-07-2014, 06:33 PM	#5
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 825	Re: '72 4x4 Dana 44 spindles... anywhere? No worries, thanks anyway! Anyone else have any suggestions?

02-07-2014, 08:51 PM	#6
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: '72 4x4 Dana 44 spindles... anywhere? Man, i scrap yarded a 72 d44 a few months ago. would have been great for this... i would bet a dollar the rotors are the same. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

02-07-2014, 09:03 PM	#7
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 825	Re: '72 4x4 Dana 44 spindles... anywhere? What!? And you the only other Durango guy I know on here?! That would've been too easy... shucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.