WA wtb rear u-bolt 72 k20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nitrosport_5** · 02-08-2014, 11:55 PM

looking for a set of 4 rear u bolts for a 72 k20 w/ Eaton rear. removing my 4" blocks for a set of 4" springs. have all brackets and hardware, just need u bolts. thanks

**special-K** · 02-09-2014, 11:58 AM

Your local parts store can hook you up with brand spankin' new unstretched,unfatigued,unrusty,unmessed up thread u-bolts for not a whole lot of moolah. Take yours in or measure your axle diameter and figure how long. I get mine from Napa(always cut old ones off)

**nitrosport_5** · 02-10-2014, 05:59 PM

thanks. do you know the size of bolts an Eaton rear k20 would need? I've got super longnsprigs from my 4 inch blocks. I'm putting 4" springs so I should just need factory length bolts. do you know the axle tube diameter?

02-08-2014, 11:55 PM	#1
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	wtb rear u-bolt 72 k20 looking for a set of 4 rear u bolts for a 72 k20 w/ Eaton rear. removing my 4" blocks for a set of 4" springs. have all brackets and hardware, just need u bolts. thanks __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

02-09-2014, 11:58 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: wtb rear u-bolt 72 k20 Your local parts store can hook you up with brand spankin' new unstretched,unfatigued,unrusty,unmessed up thread u-bolts for not a whole lot of moolah. Take yours in or measure your axle diameter and figure how long. I get mine from Napa(always cut old ones off) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-10-2014, 05:59 PM	#3
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Re: wtb rear u-bolt 72 k20 thanks. do you know the size of bolts an Eaton rear k20 would need? I've got super longnsprigs from my 4 inch blocks. I'm putting 4" springs so I should just need factory length bolts. do you know the axle tube diameter? __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.