SC Motor 700r4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 01-18-2014, 05:46 PM

Complete motor transmission combo ready to run. I have the old 305 TPI motor and 700r4 out of my truck. I'm willing to sell it complete with computer and harness ready to run with just a few wires to hook up. The motor will need a rebuild though but it does run. The wiring is from Street & Performance with there chip in the computer. It has ran fine but just wanted to upgrade.

$800.00 for everything you come and get it. No shipping.
I even have the orignal directions from S&P for it.
If you want parts off of it I may be willing to do that also and scrap the motor. The transmission is OK. I have ran both stock and aftermarket coolers on it so it's never been ran hot are hard. No racinging it.

frednoah · 01-18-2014, 05:53 PM

Any interest in separating the combo and selling the trans?

Andy4639 · 01-18-2014, 06:27 PM

Yea I would do that also. You come seperate it and pick it up. I'll help! $450.00. I may even have it seperated for you.

frednoah · 01-18-2014, 06:29 PM

If you still have it in a few weeks I may have to take you up on that. Blew my toy budget wide open with the AAW harness and 3.73 posi rear in the last week.

Andy4639 · 02-02-2014, 10:08 PM

TTT

It's still for sale! Anyone.

Andy4639 · 02-10-2014, 08:09 AM

Guy's the motor has less than 1 year timing chain and gear installed in it last May. This combo is straight out of my 71. The combo worked well for a DD. No it's not a speed demon but 16 MTG and reliable. Make a realistic offer and come get it.

bigrigpardo · 02-10-2014, 11:54 AM

just out of curiosity what would you want for the computer and harness? did you have an 02 sensor check engine light and port to read codes hooked up? and is that tpi set up off a 350? never knew they had it for the 305

bigrigpardo · 02-10-2014, 11:58 AM

and did the harness run the 700r4 lockup to like the factory or did you have a separate lokup?

**1970 CST Short Wide** · 02-10-2014, 12:04 PM

Man I wish you were closer, Great Deal

To the Top for you

Andy4639 · 02-10-2014, 06:54 PM

305 TPI Ho engine stock nothing is bored are camed. It's all factory. 700r4 has electric toggle switch to lock and unlock it with B&M shift kit. The motor has the correct bracket for the TV cable to 700r4 to make it kickdown no adjusting since it came with it stock. This is a complete system and no I would rather not sell the computer and harness seeing how it would make the motor useless.
Somebody needs this combo!

frednoah · 02-10-2014, 10:12 PM

Somebody needs that 700r4, but blew his entire fun budget over the last month on a rear end and new wiring harness.

qksilver · 02-11-2014, 01:22 AM

if Fred does the trans i would do the rest for $350 plus Fred you pay for my gas not mileage , for the whole trip from my house to SC to you and back to me I would deliver it and give you my time.

Andy, I have a nice 305, actually a couple of them and one r-700 and r-200 trans. What I need really is the injectors and wiring harness but would take everything but the trans with the quoted $450 taken off for the trans.

I am in no hurry, I just got a swb frame and it will be a while until I finish that and would need the injectors and wiring stuff.

I might forget this thread so get in touch with me qksilver69@aol.com but i will make a note in my book that i check before i buy anything. Old age, medical issue's and lots of meds..............

thanks,
Steve

Andy4639 · 02-11-2014, 04:12 PM

Motor and trans just sold. Sorry guys. It's bought and will be picked up on Friday! Weather permitting.

frednoah · 02-11-2014, 10:09 PM

Too good of a deal to sit as long as it did. Should make for a good turn key cruiser for the new owner.

01-18-2014, 05:46 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Motor 700r4 Complete motor transmission combo ready to run. I have the old 305 TPI motor and 700r4 out of my truck. I'm willing to sell it complete with computer and harness ready to run with just a few wires to hook up. The motor will need a rebuild though but it does run. The wiring is from Street & Performance with there chip in the computer. It has ran fine but just wanted to upgrade. $800.00 for everything you come and get it. No shipping. I even have the orignal directions from S&P for it. If you want parts off of it I may be willing to do that also and scrap the motor. The transmission is OK. I have ran both stock and aftermarket coolers on it so it's never been ran hot are hard. No racinging it. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-18-2014, 05:53 PM	#2
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Motor 700r4 Any interest in separating the combo and selling the trans?

01-18-2014, 06:27 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Motor 700r4 Yea I would do that also. You come seperate it and pick it up. I'll help! $450.00. I may even have it seperated for you. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-18-2014, 06:29 PM	#4
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Motor 700r4 If you still have it in a few weeks I may have to take you up on that. Blew my toy budget wide open with the AAW harness and 3.73 posi rear in the last week.

02-02-2014, 10:08 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Motor 700r4 TTT It's still for sale! Anyone. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-10-2014, 08:09 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Motor 700r4 Guy's the motor has less than 1 year timing chain and gear installed in it last May. This combo is straight out of my 71. The combo worked well for a DD. No it's not a speed demon but 16 MTG and reliable. Make a realistic offer and come get it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-10-2014, 11:54 AM	#7
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Motor 700r4 just out of curiosity what would you want for the computer and harness? did you have an 02 sensor check engine light and port to read codes hooked up? and is that tpi set up off a 350? never knew they had it for the 305

02-10-2014, 11:58 AM	#8
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: Motor 700r4 and did the harness run the 700r4 lockup to like the factory or did you have a separate lokup?

02-10-2014, 12:04 PM	#9
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,094	Re: Motor 700r4 Man I wish you were closer, Great Deal To the Top for you __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

02-10-2014, 06:54 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Motor 700r4 305 TPI Ho engine stock nothing is bored are camed. It's all factory. 700r4 has electric toggle switch to lock and unlock it with B&M shift kit. The motor has the correct bracket for the TV cable to 700r4 to make it kickdown no adjusting since it came with it stock. This is a complete system and no I would rather not sell the computer and harness seeing how it would make the motor useless. Somebody needs this combo! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-10-2014, 10:12 PM	#11
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Motor 700r4 Somebody needs that 700r4, but blew his entire fun budget over the last month on a rear end and new wiring harness.

02-11-2014, 01:22 AM	#12
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Motor 700r4 if Fred does the trans i would do the rest for $350 plus Fred you pay for my gas not mileage , for the whole trip from my house to SC to you and back to me I would deliver it and give you my time. Andy, I have a nice 305, actually a couple of them and one r-700 and r-200 trans. What I need really is the injectors and wiring harness but would take everything but the trans with the quoted $450 taken off for the trans. I am in no hurry, I just got a swb frame and it will be a while until I finish that and would need the injectors and wiring stuff. I might forget this thread so get in touch with me qksilver69@aol.com but i will make a note in my book that i check before i buy anything. Old age, medical issue's and lots of meds.............. thanks, Steve

02-11-2014, 04:12 PM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Motor 700r4 Motor and trans just sold. Sorry guys. It's bought and will be picked up on Friday! Weather permitting. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-11-2014, 10:09 PM	#14
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Motor 700r4 Too good of a deal to sit as long as it did. Should make for a good turn key cruiser for the new owner.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.