OR Misc parts from a few trucks

[JPSAUTO]

Tom any luck with the exhaust hangers. John

[ayellow56]

Tom, do you by chance have any SBC engine mount pedestals left? If so I'll take two. Thanks . Steve

[tll74]

Originally Posted by JPSAUTO

Tom any luck with the exhaust hangers. John

John, sorry I missed this one getting back to you. I did check weeks ago and the truck that had them are already gone. Did You still want the throttle rod?

Originally Posted by ayellow56

Tom, do you by chance have any SBC engine mount pedestals left? If so I'll take two. Thanks . Steve

Steve..Yes, I have many sets. You want two sets correct? Shipping on two sets 16.00

Thanks, Tom

[ayellow56]

Tom,I just need one set for a 68 c10. Just let me know which method of payment you prefer. Thank you . Steve.

[JPSAUTO]

Tom need payment info for the throttle rod. John

[slorio]

Tom:
Do you have any GMC trucks with V6 engines to part out? I am looking for intake and exhaust manifolds from a GMC with a 351 V6 that uses the larger port (magnum) manifolds.
Regards,
Steve
New Orleans

[tll74]

Originally Posted by ayellow56

Tom,I just need one set for a 68 c10. Just let me know which method of payment you prefer. Thank you . Steve.

Pm sent

Originally Posted by JPSAUTO

Tom need payment info for the throttle rod. John

PM sent

Originally Posted by slorio

Tom:
Do you have any GMC trucks with V6 engines to part out? I am looking for intake and exhaust manifolds from a GMC with a 351 V6 that uses the larger port (magnum) manifolds.
Regards,
Steve
New Orleans

Steve, I haven't had a V6 truck in years. Sorry no help on this one.

Thanks Guys, Tom

[JPSAUTO]

Tom paypal sent. PM sent with shipping info. So who has some exhaust hangers? Thanks John

[71chevyowner]

Do you have a passenger door latch? Good working order.. if so how much?

[tll74]

Originally Posted by JPSAUTO

Tom paypal sent. PM sent with shipping info. So who has some exhaust hangers? Thanks John

I just found a pile of parts from a 70 BB truck that I parted and never made a thread. I might have them after all. I'm tearing down a truck this weekend for a cab I sold local. I'll look through it the pile then and let you know.

Originally Posted by 71chevyowner

Do you have a passenger door latch? Good working order.. if so how much?

Yes, 25.00 take out or 40.00 acid dipped and media blasted. Once this is done they work perfectly. Just grease up and install. 10.00 shipping


Thanks, Tom

[Trucolur]

Would you sale the power steering lines off of gear box in picture ?? Are they good shape ?? And shipping ??
1880 Locke Rd
Millington TN
38053

[Trucolur]

Do you have radiator hold downs and shroud ?? In good shape ?? 3or4 core radiator ?? Shipping if so ??
1880 Locke Rd
Millington TN
38053

[tll74]

Originally Posted by Trucolur

Do you have radiator hold downs and shroud ?? In good shape ?? 3or4 core radiator ?? Shipping if so ??
1880 Locke Rd
Millington TN
38053

I sell the lines only with P/S conversions. Yes on both the hold downs and shrouds. 4 core mounts upper and lowers 40.00 shipped, 3 core (small tanks) uppers only 16.00 shipped or uppers and lowers 26.00 shipped. SB shrouds 55.00 shipped, BB 100.00 shipped, 4x4's 95.00 plus shipping. I have all of them. Combined shipping no problem. Thanks, Tom

[69CST20]

Tom, you mention a 402 BB on the first post.
Do you happen to have a power steering bracket (assembly?) for a 402 ??
My 69 CST20 has a transplanted 402 in it, but the PS pump wobbles so bad it is unusable.
I think the bracket is wrong or I am missing a support or other part ..?

??

Thanks,

Mike..

in Grants Pass !

[tll74]

Originally Posted by 69CST20

Tom, you mention a 402 BB on the first post.
Do you happen to have a power steering bracket (assembly?) for a 402 ??
My 69 CST20 has a transplanted 402 in it, but the PS pump wobbles so bad it is unusable.
I think the bracket is wrong or I am missing a support or other part ..?

??

Thanks,

Mike..

in Grants Pass !

Hi Mike, can you post a pic of your pump set up in this thread? That would tell me what your missing or posssibly explain your problem. I don't have any 402 brackets separate from a pump. Thanks, Tom

[1971 cheburban]

Do you still have the crank pulley, is it single belt, and a set of v-8 motor mounts, the outer steel pieces, plus shipping to ohio, thanks

[69CST20]

Originally Posted by tll74

Hi Mike, can you post a pic of your pump set up in this thread? That would tell me what your missing or posssibly explain your problem. I don't have any 402 brackets separate from a pump. Thanks, Tom

front and back pics attached, looks normal. don't work ..
Thanks.
???

Mike..

[69CST20]

Originally Posted by 69CST20

front and back pics attached, looks normal. don't work ..
Thanks.
???

Mike..

One more pic .. The "new" bolt on the right side had about 6 washers on it.
I took a few washers off and cut the bolt a bit, still NG.
Woobles like a top with the belt very loose, POPS the belt if I tighten it up.

???

Mike.

[72c10suburban]

Hey Tom. How bout the heater box mounted on the firewall for my 72? No fan or core, just the box.
Thanks.

[tll74]

Originally Posted by 72c10suburban

Hey Tom. How bout the heater box mounted on the firewall for my 72? No fan or core, just the box.
Thanks.

Sorry, I sold that one.

[69CST20]

Originally Posted by Trucolur

Would you sale the power steering lines off of gear box in picture ?? Are they good shape ?? And shipping ??
1880 Locke Rd
Millington TN
38053

Yes ! and then sell me the bracket .. I'm sure you can sell the pump separately too.

Mike..