|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-16-2014, 09:01 PM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: Lakeside Ariz
Posts: 445
|
Moser Enginering <axels>
I ordered a set of axles 3 1/2 in shorter than stock axles on a 79 Camaro. They sent me axles that were 4 1/2 inches shorter. I called them and explained the problem. They sent me another set of axles at no cost to me what so ever. and said to keep the other axles, freight was to much to send back. Now that is the way business should be run. But not to many do this day and age. I would buy from them in a heartbeat again. Rich
|
|
|
|
02-16-2014, 09:09 PM
|
#2 |
|
Registered User
Join Date: Oct 2013
Location: Hustisford, WI
Posts: 169
|
Re: Moser Enginering <axels>
A few years ago I ordered some custom front axle shafts and the inner axle seal area was machined in the wrong place. They sent out some new ones machined properly the next day at no cost to me. They did want the wrong ones back so they could shorten them for another application. I also will order from them again.
__________________
'46 GMC---355,TH400, 9" '66 K20---350, SM420, T221, D44, HO72, 4.56 '87 K30---tbi 350, TH400, NP205 twinstick, D60 powerlok, 14ff Detroit, 4.10 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
