my truck is a 3 tone now - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dinnut · 12-26-2003, 04:02 PM

put the door on i bought from slicknsmooth72... not too much work. just needs a little adjusting and some paint. im not getting it painted for a while i dont think

dinnut · 12-26-2003, 04:02 PM

2. someone painted over the beautiful original green with some darker color that is coming off

dinnut · 12-26-2003, 04:03 PM

3

dinnut · 12-26-2003, 04:05 PM

another question..... what does this wire do. it comes out of the fuseblock in the engine compartment in the lower left part of it and is just sitting there not connected to anything

dinnut · 12-26-2003, 04:06 PM

and what does this wire do? it just sits down there. i know its not the horn one.... horn one is there too. the brown one with the metal connector is the one im talking about

Hotrod70C10 · 12-26-2003, 04:43 PM

I'm not sure on the wires but, don't feel bad about the 3 tone. Right now mine is the same way. Brown from the windsheild up, primer from there down, and blue interior.

**Stocker** · 12-26-2003, 04:59 PM

Looks like a piggyback type connector - my only guess would have been for the 2nd horn??

FRENCHBLUE72 · 12-26-2003, 05:51 PM

Why did you change door's????

jmanz69 · 12-26-2003, 07:56 PM

The long wire is probably for a choke that is not being used on your truck now. IF you have an electric choke hooked up, see where it goes, it might be an addon because the original stopped working. The second wire could be a 2nd horn or maybe something to do with the parking lights. I can't see exactly where it is in the engine compartment, so it's tought to say. GM color for the park lights was and has been for a long time dark brown. Get a meter or test light and see if it becomes live when the lights are turned on.

lukecp · 12-26-2003, 08:14 PM

Nothing wrong with 3-tone, my truck is too. Ochre, white and PRIMER

*Randy70C-10* · 12-26-2003, 09:18 PM

Had to go to my garage and make sure my doors were still there.

dinnut · 12-26-2003, 10:17 PM

your doors look better than mine randy....

the wire im talking about is a short one. the really long one goes to my prop valve...
see? this looks too short for an electric choke. i got a quadratoilet.
and today my truck was missing pretty good at high rpms for no apparent reason...

this is the brown wire in question...

**Canadian694x4** · 12-27-2003, 03:28 AM

Man I Hate Wiring Probs...I've got a few stray wires on my truck but she runs like a top (Knock Wood) as of now so I don't wanna mess with 'em until sumthin goes awry...Good Luck with tryin to figure her out tho...

dinnut · 12-27-2003, 03:32 AM

tomorrow im going to buy the wiring and turn signal setup for the tilt in my garage im going to put in it and a new engine harness and alternator conversion kit. also i have a sunpro tach to put in the dash

Alexis · 12-27-2003, 03:32 AM

Any chick in better then no chick in your photos of your truck, even if she's made from stone

Any improvement on a truck is always good. Keep it up. Whens the big block going in

dinnut · 12-27-2003, 03:34 AM

Quote:

Originally posted by FRENCHBLUE72
Why did you change door's????

bc, the old door has a lot wrong with it. big ole dent, latch didnt work, regulator didnt work, door panel was trash, and i found this door and all this stuff worked and i got it for cheaper than if i bought all that stuff. plus it has a chrome vent window and trim

dinnut · 12-27-2003, 03:37 AM

Quote:

Originally posted by Alexis
Any chick in better then no chick in your photos of your truck, even if she's made from stone Any improvement on a truck is always good. Keep it up. Whens the big block going in

i want a big block bad, but i couldnt afford gas. its either a big block or fix up the truck in general. its gonna get the 383 treatment when this motor goes kaput. see this is my first car/truck and i need to get decent gas mileage. im only 16 and dont have a job

so ya i could get a bb but gas would kill me.
i found a complete 454/t400 for sale for 800.actually went and looked it was completely complete. a/c compressor, ps, alt, intake, carb everything you name it had it. i wanted it but i would rather have other stuff right now

BobbyK · 12-27-2003, 08:10 AM

Thatbbrown wire might be for the prop. valve warning light.

12-26-2003, 04:02 PM	#1
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	my truck is a 3 tone now put the door on i bought from slicknsmooth72... not too much work. just needs a little adjusting and some paint. im not getting it painted for a while i dont think Attached Images __________________ 70 longbed 496/th400/Ford 9"

12-26-2003, 04:02 PM	#2
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	2. someone painted over the beautiful original green with some darker color that is coming off Attached Images __________________ 70 longbed 496/th400/Ford 9"

12-26-2003, 04:03 PM	#3
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	3 Attached Images __________________ 70 longbed 496/th400/Ford 9"

12-26-2003, 04:05 PM	#4
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	another question..... what does this wire do. it comes out of the fuseblock in the engine compartment in the lower left part of it and is just sitting there not connected to anything Attached Images __________________ 70 longbed 496/th400/Ford 9"

12-26-2003, 04:06 PM	#5
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	and what does this wire do? it just sits down there. i know its not the horn one.... horn one is there too. the brown one with the metal connector is the one im talking about Attached Images __________________ 70 longbed 496/th400/Ford 9"

12-26-2003, 04:43 PM	#6
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I'm not sure on the wires but, don't feel bad about the 3 tone. Right now mine is the same way. Brown from the windsheild up, primer from there down, and blue interior. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

12-26-2003, 04:59 PM	#7
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,728	Looks like a piggyback type connector - my only guess would have been for the 2nd horn?? __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

12-26-2003, 05:51 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Why did you change door's???? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-26-2003, 07:56 PM	#9
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	The long wire is probably for a choke that is not being used on your truck now. IF you have an electric choke hooked up, see where it goes, it might be an addon because the original stopped working. The second wire could be a 2nd horn or maybe something to do with the parking lights. I can't see exactly where it is in the engine compartment, so it's tought to say. GM color for the park lights was and has been for a long time dark brown. Get a meter or test light and see if it becomes live when the lights are turned on.

12-26-2003, 08:14 PM	#10
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Nothing wrong with 3-tone, my truck is too. Ochre, white and PRIMER __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

12-26-2003, 09:18 PM	#11
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Had to go to my garage and make sure my doors were still there.

12-26-2003, 10:17 PM	#12
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	your doors look better than mine randy.... the wire im talking about is a short one. the really long one goes to my prop valve... see? this looks too short for an electric choke. i got a quadratoilet. and today my truck was missing pretty good at high rpms for no apparent reason... this is the brown wire in question... Attached Images __________________ 70 longbed 496/th400/Ford 9"

12-27-2003, 03:28 AM	#13
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Man I Hate Wiring Probs...I've got a few stray wires on my truck but she runs like a top (Knock Wood) as of now so I don't wanna mess with 'em until sumthin goes awry...Good Luck with tryin to figure her out tho... __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-27-2003, 03:32 AM	#14
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	tomorrow im going to buy the wiring and turn signal setup for the tilt in my garage im going to put in it and a new engine harness and alternator conversion kit. also i have a sunpro tach to put in the dash __________________ 70 longbed 496/th400/Ford 9"

12-27-2003, 03:32 AM	#15
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	Any chick in better then no chick in your photos of your truck, even if she's made from stone Any improvement on a truck is always good. Keep it up. Whens the big block going in



Register or Log In To remove these advertisements.

12-27-2003, 08:10 AM	#18
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Thatbbrown wire might be for the prop. valve warning light. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

Register or Log In To remove these advertisements.