1960 1 ton pics - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazer-k5 · 11-18-2013, 11:52 PM

Well all I have done is what you see. That coil is what I had laying around. As soon as i figure out the electrical issue I bet it will fire right off. Coil has enough juice to burn the hair of a spiders keister.

I had to "convince" the coil bracket to accept a skinny smoother coil. I homemade a L bracket and welded it on...that sucker is not going anywhere.

TJ's Chevy · 11-19-2013, 04:17 PM

Here is a picture of my Junior West Coast Chrome mirrors.

1963c-10 · 11-19-2013, 04:46 PM

The west coast mirrors will look good on it.

blazer-k5 · 12-04-2013, 09:36 PM

Those are some decent looking mirrors. I have no idea what i will use since mine are gone. lol

Do any of you know if these wheels will fit my 60?

http://lawton.craigslist.org/pts/4158017891.html

b.sharp · 12-05-2013, 09:31 AM

if I remember correctly the new wheels will not fit your truck. The lug pattern is the same but the center whole is too small for the older trucks. You can get 73-87 bud wheels from a newer dully if you are wanting to keep it dual wheel. I have a set for my
'65.

66Submarine · 12-05-2013, 11:36 AM

I think they work; I've seen quite a few older trucks with them (I almost put some on mine). Lug nuts and studs might need to be changed; IIRC you can get a 9/16" lug nut that works with the caps, I'm not sure about 1/2" stuff. They are called "PYO" wheels, BTW. I think the 67-72 guys have a couple threads, I'll try to dig one up.

66Submarine · 12-05-2013, 11:40 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=330740

Here's a thread on 8 lug wheels for ya.

blazer-k5 · 12-05-2013, 07:31 PM

OH SNAP it looks like they will fit! I have single wheels I lucked out don't have a dully. Guess i better jump on them huh? lol

blazer-k5 · 12-05-2013, 07:34 PM

I think i will have to change my lug nuts to run them. Agreed.

blazer-k5 · 02-25-2014, 08:20 PM

So this happened after I bumped the valve cover with a rubber mallet.......I WILL NEVER DO THAT AGAIN!

1963c-10 · 02-25-2014, 08:23 PM

Quote:

Originally Posted by blazer-k5

So this happened after I bumped the valve cover with a rubber mallet.......I WILL NEVER DO THAT AGAIN!

Awwww man, that sucks. Hope its not too bad of a pain to clean up.

blazer-k5 · 02-25-2014, 08:48 PM

It...Im not quite sure how long it took. I was lucky and rigged a shop vac i got 90% or more of it all re oiled everything...except for all that goo/dried goo. The top of the head was perfect no sludge...

TJ's Chevy · 02-25-2014, 09:25 PM

Glad the mess cleaned up! Have you decided on a set of mirrors? Sorry if I missed something...

blazer-k5 · 02-26-2014, 11:39 PM

Nope, you didnt . I did look at some mirrors. I figured that would be later though I have to fix the half melted rats nest under the dash. I plan on doing it this saturday. I will totally post a picture...If i can get it to run in the same day I will try to post a vid.

11-18-2013, 11:52 PM	#26
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics Well all I have done is what you see. That coil is what I had laying around. As soon as i figure out the electrical issue I bet it will fire right off. Coil has enough juice to burn the hair of a spiders keister. I had to "convince" the coil bracket to accept a skinny smoother coil. I homemade a L bracket and welded it on...that sucker is not going anywhere. Attached Images __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

11-19-2013, 04:17 PM	#27
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1960 1 ton pics Here is a picture of my Junior West Coast Chrome mirrors. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-19-2013, 04:46 PM	#28
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1960 1 ton pics The west coast mirrors will look good on it. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

12-04-2013, 09:36 PM	#29
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics Those are some decent looking mirrors. I have no idea what i will use since mine are gone. lol Do any of you know if these wheels will fit my 60? http://lawton.craigslist.org/pts/4158017891.html __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

12-05-2013, 09:31 AM	#30
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 1960 1 ton pics if I remember correctly the new wheels will not fit your truck. The lug pattern is the same but the center whole is too small for the older trucks. You can get 73-87 bud wheels from a newer dully if you are wanting to keep it dual wheel. I have a set for my '65.

12-05-2013, 11:36 AM	#31
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: 1960 1 ton pics I think they work; I've seen quite a few older trucks with them (I almost put some on mine). Lug nuts and studs might need to be changed; IIRC you can get a 9/16" lug nut that works with the caps, I'm not sure about 1/2" stuff. They are called "PYO" wheels, BTW. I think the 67-72 guys have a couple threads, I'll try to dig one up. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

12-05-2013, 11:40 AM	#32
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: 1960 1 ton pics http://67-72chevytrucks.com/vboard/s...d.php?t=330740 Here's a thread on 8 lug wheels for ya. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

12-05-2013, 07:31 PM	#33
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics OH SNAP it looks like they will fit! I have single wheels I lucked out don't have a dully. Guess i better jump on them huh? lol __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

12-05-2013, 07:34 PM	#34
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics I think i will have to change my lug nuts to run them. Agreed. __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

02-25-2014, 08:20 PM	#35
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics So this happened after I bumped the valve cover with a rubber mallet.......I WILL NEVER DO THAT AGAIN! Attached Images __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

02-25-2014, 08:48 PM	#37
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics It...Im not quite sure how long it took. I was lucky and rigged a shop vac i got 90% or more of it all re oiled everything...except for all that goo/dried goo. The top of the head was perfect no sludge... __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

02-25-2014, 09:25 PM	#38
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1960 1 ton pics Glad the mess cleaned up! Have you decided on a set of mirrors? Sorry if I missed something... __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

02-26-2014, 11:39 PM	#39
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: 1960 1 ton pics Nope, you didnt . I did look at some mirrors. I figured that would be later though I have to fix the half melted rats nest under the dash. I plan on doing it this saturday. I will totally post a picture...If i can get it to run in the same day I will try to post a vid. __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.