|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-28-2014, 07:50 PM
|
#1 |
|
Registered User
Join Date: Aug 2011
Location: confusion, USA
Posts: 206
|
how do you get distributor to turn so i can advance timing manually.
I want to turn my distributor a bit to advance my timing but it seems like its locked in place, i was lightly pushing against the vacuum advance to move it and it wont budge.
|
|
|
|
02-28-2014, 08:00 PM
|
#2 |
|
Registered User
Join Date: Dec 2011
Location: Massachusetts
Posts: 240
|
Re: how do you get distributor to turn so i can advance timing manually.
Loosen the hold down bolt attached to the manifold. IIRC it's a 9/16 bolt.
|
|
|
|
|
03-01-2014, 09:03 AM
|
#3 |
|
Registered User
Join Date: Jul 2010
Location: Janesville, WI
Posts: 664
|
Re: how do you get distributor to turn so i can advance timing manually.
What he said ^ its on the passenger side of the base of the distributor. Its easiest with a distributor wrench found at a local parts store for a couple bucks but do able with out. Remember to tighten when done. Use a timing light. Pull the vacuum line off your advance and plug it then I like to set advance to 12-14* advance initially. An about 800-1000 rpm . Everyone has a different advance number they like to use. This is just where I've had good luck with
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
