Any one know where on the net - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frank-id · 12-26-2003, 10:36 PM

GM part numbers can be found. My son in law is restoring a '69 Camaro. While gathering some 4 speed parts, the bell housings does fit the engine, while using Chevy parts. The clutch/pressure plate assembly will not allow the bell housing to be bolted onto engine. He has found 3 aluminium housings and none will fit. The engine is a 350 sb and plans to use a muncie 4 gear, all factory parts. Are there different bell housings for small block engines. The p-plate is the 11 inch style.

Txstruck · 12-27-2003, 12:51 PM

http://www.car-parts-place.com/p36-3...-listings.html

[url]http://www.firstgen.com/Rick'sFreeCamaroPartsCatalog.html[url]

Hope these help you out.

jimfulco · 12-28-2003, 05:58 AM

The housing for the big (14") flywheel has a part number cast on the right side that ends in -621 (I think it's 3899621). The smaller one for the 12.75" flywheel has pn 3858403. Here's two places to try:

http://www.rickscamaros.com/cgi-loca...784+1073508719 (click on "bellhousing & cover")

www.kajunjon.com

12-26-2003, 10:36 PM	#1
Frank-id Registered User Join Date: Sep 2003 Location: Twin Falls, Idaho Posts: 73	Any one know where on the net GM part numbers can be found. My son in law is restoring a '69 Camaro. While gathering some 4 speed parts, the bell housings does fit the engine, while using Chevy parts. The clutch/pressure plate assembly will not allow the bell housing to be bolted onto engine. He has found 3 aluminium housings and none will fit. The engine is a 350 sb and plans to use a muncie 4 gear, all factory parts. Are there different bell housings for small block engines. The p-plate is the 11 inch style. __________________ Chevy stepper 400sb 350 turbo

12-27-2003, 12:51 PM	#2
Txstruck Registered User Join Date: Nov 2002 Location: Dallas Posts: 459	http://www.car-parts-place.com/p36-3...-listings.html [url]http://www.firstgen.com/Rick'sFreeCamaroPartsCatalog.html[url] Hope these help you out. __________________ Steve 86 K30 4x4 6.2L Diesel\TH400\NP208 - 14bolt FF rear w/detroit locker and Dana60 front w/detroit locker- both with 4.56 gears "Runs on Mud"

12-28-2003, 05:58 AM	#3
jimfulco Registered User Join Date: May 2003 Location: Shreveport LA Posts: 3,170	The housing for the big (14") flywheel has a part number cast on the right side that ends in -621 (I think it's 3899621). The smaller one for the 12.75" flywheel has pn 3858403. Here's two places to try: http://www.rickscamaros.com/cgi-loca...784+1073508719 (click on "bellhousing & cover") www.kajunjon.com Last edited by jimfulco; 12-28-2003 at 06:02 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.