Console/System Progress :) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IronAnRkst · 03-02-2014, 04:25 PM

That's the console in, it has room for cupholders up front which I just have not put in yet.

The subs in box, amp is mounted in between yet as I am getting the tuning right first.

But no doubt its coming along

bigwheel15 · 03-03-2014, 04:04 AM

What kinda cu. ft. were you able to get for those rockfords?

IronAnRkst · 03-03-2014, 02:32 PM

I didnt go for the volume I just went with what I had space to do. I can get some measurements though and fig out the volume in a bit.

bigwheel15 · 03-03-2014, 10:48 PM

I'd appreciate it, and your work looks nice btw.

54Caddy · 03-03-2014, 11:33 PM

why not mount deck in factory spot and put some kick panels with the speakers in them? You'd hear the speakers better in the kick panel with them facing at an upwards angle. also put a 4x10 under dash in factory center help out a lot im running the kenwood one.

IronAnRkst · 03-03-2014, 11:42 PM

Okay according to http://www.bcae1.com/spboxnew2.htm I have .633 volume per side.

And I put it in the console because I wanted to build a console to put some cupholders in and liked the thought of the CD player there as well as the fact that the previous owner hacked the dash all up. And the factory 4X10 spot is gone due to a giant square hacked out of the metal for some unknown reason. I did contemplate adding a second set in the dash but honestly it sounds okay as it is.

03-02-2014, 04:25 PM	#1
IronAnRkst Registered User Join Date: Aug 2013 Location: Brunswick, GA Posts: 29	Console/System Progress :) That's the console in, it has room for cupholders up front which I just have not put in yet. The subs in box, amp is mounted in between yet as I am getting the tuning right first. But no doubt its coming along

03-03-2014, 04:04 AM	#2
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: Console/System Progress :) What kinda cu. ft. were you able to get for those rockfords?

03-03-2014, 02:32 PM	#3
IronAnRkst Registered User Join Date: Aug 2013 Location: Brunswick, GA Posts: 29	Re: Console/System Progress :) I didnt go for the volume I just went with what I had space to do. I can get some measurements though and fig out the volume in a bit.

03-03-2014, 10:48 PM	#4
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: Console/System Progress :) I'd appreciate it, and your work looks nice btw.

03-03-2014, 11:33 PM	#5
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Console/System Progress :) why not mount deck in factory spot and put some kick panels with the speakers in them? You'd hear the speakers better in the kick panel with them facing at an upwards angle. also put a 4x10 under dash in factory center help out a lot im running the kenwood one. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

03-03-2014, 11:42 PM	#6
IronAnRkst Registered User Join Date: Aug 2013 Location: Brunswick, GA Posts: 29	Re: Console/System Progress :) Okay according to http://www.bcae1.com/spboxnew2.htm I have .633 volume per side. And I put it in the console because I wanted to build a console to put some cupholders in and liked the thought of the CD player there as well as the fact that the previous owner hacked the dash all up. And the factory 4X10 spot is gone due to a giant square hacked out of the metal for some unknown reason. I did contemplate adding a second set in the dash but honestly it sounds okay as it is.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.