Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-07-2014, 07:19 PM | #1 |
Registered User
Join Date: Mar 2014
Location: waldorf,md
Posts: 3
|
71 C10 5x4 3/4 bolt pattern conversion
What is the best way to convert the front end on a 71 C10 to the 5x4 3/4 bolt pattern? I heard you can use S-10 spindles, any truth?
|
03-07-2014, 07:32 PM | #2 |
Registered User
Join Date: May 2013
Location: odessa,tx
Posts: 72
|
Re: 71 C10 5x4 3/4 bolt pattern conversion
Mcg big brake kits come in that pattern. Probably the easiest. That's what I'm trying to do and a s10 rear end
|
03-07-2014, 07:33 PM | #3 |
Registered User
Join Date: Feb 2013
Location: Upland, Calif
Posts: 698
|
Re: 71 C10 5x4 3/4 bolt pattern conversion
Why would you want 5 on 4.75"? 1/2 ton trucks are 5 on 5" or 6 lug for a reason-it's stronger considering the weight and duty of a truck vs a car.
__________________
1957 CHEVY 1/2 TON SHORT BED 1940 FORD 1/2 TON SHORT BED |
03-07-2014, 07:54 PM | #4 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,279
|
Re: 71 C10 5x4 3/4 bolt pattern conversion
Unless you found the super rare [and expensive 8.5 posi rear] from a 2wd or the still pretty costly ZR2 rear[8.5 posi still] why would you want to use an S-10 rear in a C-10 unless your making a pro look- a- like that won't do much go because the axles would def be the weak link. 7.5 rears aren't known for ultimate strength. I'm saying this with much love and respect for the S-dime trucks, I used to build them and do love them so I am not hating on you or your ideas or the truck.
|
03-07-2014, 08:32 PM | #5 |
Registered User
Join Date: May 2013
Location: odessa,tx
Posts: 72
|
Re: 71 C10 5x4 3/4 bolt pattern conversion
I have a sbc s10 and it does fine. But I'm doing the s10 rear end for its narrowness. Planning on some deep dish billets. Mines a jimmy that will only be for cruising. I'm not hard on my cars
|
03-09-2014, 01:43 AM | #6 |
Registered User
Join Date: Oct 2009
Location: port robinson ontario canada
Posts: 400
|
Re: 71 C10 5x4 3/4 bolt pattern conversion
Very easy to do , both front and rear end , all using original gm parts. front ends up with 81-87 light duty spindles, calipers & ball joints, Camaro rotors , rear end works with a factory 12 bolt passenger car axle & brake drums in the truck housing, all bolt on. Pm me if you would like a detailed breakdown , I've done this one many times - Bob
|
Bookmarks |
|
|