Headers, tac, racing seat belts, Intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69 air cab · 12-28-2003, 09:37 PM

I have the following for sale. I will try to be able to furnish pics but can't promise it. Large items are for pick up only I will not ship........I live in Maryville, TN. Come buy and I'll sell all to you in a package........I need the room.

All of these parts were installed on a 69 C10, 350 and working fine until removed about 6 months about when I started a frame off.

Small block headers - $75 - have been cleaned but believe they had been power coated at one time. Will need to be painted.

Stage III tac. the kind that mounts on the steering col. - $75

Sliding rear glass - will need new rubber. - $100

Edelbrock intake manifold - just needs a little cleaning - $150

R.J.S. racing seat belts - two sets - $45

Cobra scooter 40cc - needs rear sprocket but runs good. paid $450 will take $250...did not come off the truck

6000# winch - this is one of the $1500 ones that is a bout 5 years old. $550. I was told it works fine but never used it since I decided to sell my trailer. The guy I bought it from is very honest so I believe it is good..........just want my $ out of it.

2" drop coil springs - $150 for all four

stock coil springs - $100

water pump, flex fan, pully - good - $50

Valve covers, oil pan, timing cover - fair shape - $45

Cragar "wide" wheels (6 lug) and tires - some rust and some tread left on tires except for the one that burned rubber - $150

Brk drums - 2 new never used - $50 for two, four used (one looks new - $50 for all four.

THanks

Bagged72 · 12-28-2003, 10:28 PM

Hey do you have any pics of the seatbelts? I am very interested. Thanks

69 air cab · 12-28-2003, 10:35 PM

Not yet but I can try to take some tomorrow if I can get the camera working.....it will shot the shot but the down load is trouble. The belts are about 2.5 in. wide and have a large quick connector where they connect.

68gmcjon · 12-28-2003, 11:14 PM

im interested in the belts too if bagged 72 dont want them
a pic would be great
but what color are they?
and you said they are the cam lock ones

69 air cab · 12-28-2003, 11:18 PM

They are black. The latch kind of has a quick connector that has a bar you pull up to latch. Will try to get pic tomorrow of all angles.

Bagged72 · 12-29-2003, 01:52 AM

They sound good so far. Also are they 4 point or 5 point? And what would be the price with shipping to 55109? Thanks

69 air cab · 12-29-2003, 09:36 AM

they are lap belts only

Bagged72 · 12-29-2003, 01:30 PM

Alright not what I am looking for but thanks anyways.

BigBlockBurris · 12-29-2003, 01:52 PM

Do you have any pics of the winch? What is the name brand?

Thanks

BBB

69 air cab · 12-29-2003, 05:16 PM

Well........all sold........a guy dropped by today and bought it all. THanks for everyones interest.

70ChevyLongbed · 12-29-2003, 05:42 PM

Dang! I at least wanted to look at the stuff

Glad you could sell it all.

12-28-2003, 09:37 PM	#1
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Headers, tac, racing seat belts, Intake I have the following for sale. I will try to be able to furnish pics but can't promise it. Large items are for pick up only I will not ship........I live in Maryville, TN. Come buy and I'll sell all to you in a package........I need the room. All of these parts were installed on a 69 C10, 350 and working fine until removed about 6 months about when I started a frame off. Small block headers - $75 - have been cleaned but believe they had been power coated at one time. Will need to be painted. Stage III tac. the kind that mounts on the steering col. - $75 Sliding rear glass - will need new rubber. - $100 Edelbrock intake manifold - just needs a little cleaning - $150 R.J.S. racing seat belts - two sets - $45 Cobra scooter 40cc - needs rear sprocket but runs good. paid $450 will take $250...did not come off the truck 6000# winch - this is one of the $1500 ones that is a bout 5 years old. $550. I was told it works fine but never used it since I decided to sell my trailer. The guy I bought it from is very honest so I believe it is good..........just want my $ out of it. 2" drop coil springs - $150 for all four stock coil springs - $100 water pump, flex fan, pully - good - $50 Valve covers, oil pan, timing cover - fair shape - $45 Cragar "wide" wheels (6 lug) and tires - some rust and some tread left on tires except for the one that burned rubber - $150 Brk drums - 2 new never used - $50 for two, four used (one looks new - $50 for all four. THanks

12-28-2003, 11:14 PM	#4
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	im interested in the belts too if bagged 72 dont want them a pic would be great but what color are they? and you said they are the cam lock ones __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

12-29-2003, 01:52 AM	#6
Bagged72 Registered User Join Date: Jul 2002 Location: Saint Paul Minnesota Posts: 53	They sound good so far. Also are they 4 point or 5 point? And what would be the price with shipping to 55109? Thanks __________________ 72 Chevy Longbed. Being bagged and shaved. To be Completed by Carcraft 03

12-29-2003, 01:52 PM	#9
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	winch ? Do you have any pics of the winch? What is the name brand? Thanks BBB

12-29-2003, 05:42 PM	#11
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,265	Dang! I at least wanted to look at the stuff Glad you could sell it all. __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

12-28-2003, 10:28 PM	#2
Bagged72 Registered User Join Date: Jul 2002 Location: Saint Paul Minnesota Posts: 53	Hey do you have any pics of the seatbelts? I am very interested. Thanks

12-28-2003, 10:35 PM	#3
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Not yet but I can try to take some tomorrow if I can get the camera working.....it will shot the shot but the down load is trouble. The belts are about 2.5 in. wide and have a large quick connector where they connect.

12-28-2003, 11:18 PM	#5
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	They are black. The latch kind of has a quick connector that has a bar you pull up to latch. Will try to get pic tomorrow of all angles.

12-29-2003, 09:36 AM	#7
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	they are lap belts only

12-29-2003, 01:30 PM	#8
Bagged72 Registered User Join Date: Jul 2002 Location: Saint Paul Minnesota Posts: 53	Alright not what I am looking for but thanks anyways.

12-29-2003, 05:16 PM	#10
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Well........all sold........a guy dropped by today and bought it all. THanks for everyones interest.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.