What are the sizes? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72superBB · 12-29-2003, 11:04 AM

I want to replace all my guages with aftermarket ones like autometer or sunpro.

What are the sizes I should be getting?

Are the fuel & speedo holes 5 inches?

Is the tack hole 3 3/8?

What size are the small ones along the bottom?

What about whether they are mechanical or electrical?

thanks

Ron

72superBB · 12-29-2003, 12:10 PM

Someone has to know!

**FRENCHBLUE72** · 12-29-2003, 01:38 PM

Gotta give it a little time ...Here are your guage sizes..
4 lower hole's are 2 5/8'' guage's center hole is a 3 3/4'' guage
and the 2 big hole's are 5'' guage hope this help's ya out..

72superBB · 12-29-2003, 05:05 PM

thanks

Ron

724x4a/cchevy · 12-29-2003, 06:45 PM

This is what it will look like!!

Vince M · 12-29-2003, 06:56 PM

A few months back Classic Truck Magazine did a 67-72 dash upgrade and they actually tried two different sizes on the bottom gauges with pictures and a how-to guide. You might try and pick up one and look it over before you begin. There was some good tips in it.

12-29-2003, 11:04 AM	#1
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	What are the sizes? I want to replace all my guages with aftermarket ones like autometer or sunpro. What are the sizes I should be getting? Are the fuel & speedo holes 5 inches? Is the tack hole 3 3/8? What size are the small ones along the bottom? What about whether they are mechanical or electrical? thanks Ron __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

12-29-2003, 12:10 PM	#2
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	Someone has to know! __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

12-29-2003, 01:38 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,603	Gotta give it a little time ...Here are your guage sizes.. 4 lower hole's are 2 5/8'' guage's center hole is a 3 3/4'' guage and the 2 big hole's are 5'' guage hope this help's ya out.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-29-2003, 05:05 PM	#4
72superBB Registered User Join Date: Nov 2003 Location: Mandan, ND Posts: 422	thanks Ron __________________ Life is full of choices and a Chevy is the best choice. 1990 Chevy SWB

12-29-2003, 06:45 PM	#5
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Here ya go!! This is what it will look like!! Attached Images __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-29-2003, 06:56 PM	#6
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	A few months back Classic Truck Magazine did a 67-72 dash upgrade and they actually tried two different sizes on the bottom gauges with pictures and a how-to guide. You might try and pick up one and look it over before you begin. There was some good tips in it. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.