TN Looking for a license plate light connector for a '67 GMC

[jabborabbo]

All-

I need the male end of the wire connector (specifically the one shown in the second picture below)...I'd be more than happy to consider the complete male/female connector, and/or the complete wire lead, and/or maybe the complete assembly....

Thanks in advance!

[davischevy]

I could be wrong (Highly unlikely, HA) but I think any GM vehicle of that era will have the piece you are looking for.

[LockDoc]

-
I found two of the female half but none of the male ends. I think the reverse lights use the same plugs. The only difference is the wire color.

LockDoc

[jabborabbo]

Originally Posted by LockDoc

-
I found two of the female half but none of the male ends. I think the reverse lights use the same plugs. The only difference is the wire color.

LockDoc

If you have the male reverse light plug I'll take it...color isn't important!

[LockDoc]

Originally Posted by jabborabbo

If you have the male reverse light plug I'll take it...color isn't important!

-
I have a bed out there I am going to scrap that should still have the reverse light buckets in it. Only problem is that it is buried in a large snow drift. It is supposed to be 50-60 degrees Monday and Tuesday so maybe the snow will melt enough that I can check it out.

LockDoc

[jabborabbo]

Originally Posted by LockDoc

-
I have a bed out there I am going to scrap that should still have the reverse light buckets in it. Only problem is that it is buried in a large snow drift. It is supposed to be 50-60 degrees Monday and Tuesday so maybe the snow will melt enough that I can check it out.

LockDoc

That will be fine, sir!

[LockDoc]

Originally Posted by jabborabbo

That will be fine, sir!

OK, the snow finally melted enough that I could pull one of the reverse light housings out and the connectors are the same as the license plate light plug. PM me your info and I will send it to you free of charge.

LockDoc

[jabborabbo]

Originally Posted by LockDoc

OK, the snow finally melted enough that I could pull one of the reverse light housings out and the connectors are the same as the license plate light plug. PM me your info and I will send it to you free of charge.

LockDoc

You, Sir, are a credit...nay, an absolute blessing to this board and community!!!

Thank you! PM inbound!