![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#26 |
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
A pic of spare indentation fix
__________________
|
![]() |
![]() |
![]() |
#27 |
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
I meant to mention over the last few weeks (I don't slave over this project) that I unbolted the fenders from bedsides, drilled out the spot welds that hold small re-inforcement straps that are inside the mounting flange, sandblasted them and inside of fenders, (in spots they were pretty rusted, but I'll make them work) sprayed with weld-thru primer, and re-welded them in the proper spots. I've since just been working the imperfections of 36 years or so of abuse on the fenders. Actually I'm getting pretty sick of it and about to call it good enough.
![]()
__________________
Last edited by hobby67stepside; 12-29-2003 at 02:17 AM. |
![]() |
![]() |
![]() |
#28 |
Registered User
![]() Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
|
Yeah TX Firefighter,
Thats the one. I bought the super kit.. came with everything... i need it to replace the trim rivets on that cougar I'm working on.. I'm sure I'll find some uses for it on my truck. |
![]() |
![]() |
![]() |
#29 |
Thats the Hillbilly way
Join Date: Jul 2001
Location: Torrance,Ca
Posts: 5,980
|
Tinted the rear window ,and changed the oil .
![]() ![]() ![]()
__________________
BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , |
![]() |
![]() |
![]() |
#30 | |
Registered User
Join Date: Apr 2003
Location: missouri city, tx
Posts: 4,486
|
Quote:
so i am gonna put that tilt in! soon i hope. i am gonna clean it up strip it paint it black wire it up and stick it in! i got another camaro wheel to put on it all i need is a horn cap... i broke the tabs off the back of mine
__________________
70 longbed 496/th400/Ford 9" |
|
![]() |
![]() |
![]() |
#31 |
Registered User
Join Date: Oct 2003
Location: Idaho
Posts: 257
|
new heater and ac hoses, center vent, hi fan relay, glove box, window felts, wing window fix, vacuum, drive.
|
![]() |
![]() |
![]() |
#32 |
Registered User
Join Date: Aug 2002
Location: Crittenden, KY
Posts: 1,965
|
Um. lets see. I got my gastank bolted back in the ambulance and a new line bent up for it. Well, i did that on Christmas, we put in a new countertop yesterday, so I woke up at like 12, then countertop, then work from 4 to 1, then sleep. Woke up at 12. then laundry. then work at 4 to 12 tonight. now here. And here in between sometimes too...
Brandon |
![]() |
![]() |
![]() |
#33 |
Never Done?
![]() Join Date: May 2000
Location: Ohio
Posts: 1,435
|
I cleaned up the garage a little bit. The biggest thing was getting the cross member bolted onto the frame so I can move it out of the driveway and into the yard (sorry neighbors!) Then I moved some truck parts around and might actually get my daily driver in the garage in a couple days.
|
![]() |
![]() |
![]() |
#34 |
Back from the Dead
Join Date: Dec 2001
Location: Salem, Oregon
Posts: 522
|
Got the interior gutted to fab mounts for the Honda Bucket-Seats and custom built Center Console. Finally coming into some extra $$$ and trying to figure out what to change next...Stereo? Line-X? Window Tint? Roll Pan? Drivers side door handle? Different size rear wheels/tires?....Oh the choices!
__________________
The only Carb that matters to me is the one under my hood! Salem, Oregon |
![]() |
![]() |
![]() |
#35 |
Registered User
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
|
Put a D60 rear disc kit on my '72
![]()
__________________
Support The Board |
![]() |
![]() |
![]() |
#36 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,900
|
Did some of the long put on hold work on my replacement step bed. Here is thread on what I accomplished with it.
http://67-72chevytrucks.com/vboard/s...threadid=82655 Also put a new steering wheel on my daughter's truck Oh yeah...ateempted to grind a hole in my finger, just cause it was there. ![]() ![]() ![]()
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#37 |
Registered User
Join Date: Aug 2003
Location: D/FW TX
Posts: 430
|
I replaced my holley carb with an edelbrock 1407.
__________________
2004 Kawasaki KLR Always looking for a cheap driver |
![]() |
![]() |
![]() |
#38 |
Senior Member
![]() Join Date: Jan 2000
Location: Arlington, VA
Posts: 398
|
I finally replaced the rear passenger side shock mount that broke (rusted off) last month. The truck sure does ride better with both shocks attached.
|
![]() |
![]() |
![]() |
#39 |
Registered User
Join Date: Oct 2002
Location: MT
Posts: 98
|
Weekend
Lets see... new shocks, brakes, hard fuel lines, '97 tahoe tank, '93 TBI motor swap, '84 front crossmember (for the disks), '76 axle swap (5 lug), and mounted the ralley's
Its been more than the weekend, more like the last month. (oh yea and I had to replace my entire front clip...f*ckin thieves) Scott... |
![]() |
![]() |
![]() |
#40 |
Registered User
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
|
Killer weekend (almost)
I decided to rebuild my front drums (tough choice between this and discs). While removing the wheel cylinder, the breaker bar slipped out of the socket, all of the force aimed at loosening it, propelled my head toward the fender. When I woke up (!), I had a huge knot over my left eye and everything was pretty blurry. Five hours later, I had replaced the drums, shoes, wheel cylinders, bearings, seals, hoses, springs, etc. and drained my bank account of $444.44. I still have a headache.
scott
__________________
Silence is golden, duct tape is silver. - Scott |
![]() |
![]() |
![]() |
#41 |
Resident Curmudgeon
![]() Join Date: Dec 1999
Location: NH
Posts: 6,664
|
Nothing. But since I have no garage and it's winter that's normal. I'm okay with it as I have all kinds of time to spend with the family and the projects that matter most to them. Don't get me wrong I like working on my trucks, but not to the point of obsessing over project progress one-upmanship. When summer rolls around I'll get something done, plus the days are longer.
![]() FYI, summer here is 3 seasons away - winter, mud, and spring. ![]()
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter ![]() Maybe I need to sell some of this crap ![]() Yet another Bozo with a sawz-all |
![]() |
![]() |
![]() |
#42 |
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
I put my wifes heater box back together. I broke it completely down, cleaned and painted each piece and re-assembled it. Here's a pic that I posted last week of the box:
|
![]() |
![]() |
![]() |
#43 |
Registered User
Join Date: Jun 2003
Location: hollister ca
Posts: 101
|
I did not get anything done this weekend ! Well I went out and spent $300 for all the bearings to the front and rear axles ! Mabe in a week or two I will get something done on the truck. We partied this weekend mostly ! Kevin and I went out and got the work truck stuck trying to help out one of our friends !
![]()
__________________
FYI : Kevin's 4x4 is also know as landon4421 ! The boy wants an avatar ! ![]() |
![]() |
![]() |
![]() |
#44 |
Registered User
Join Date: Aug 2003
Location: MN
Posts: 380
|
Absolutly nothing
![]()
__________________
1972 C10 1972 C20 ![]() |
![]() |
![]() |
![]() |
#45 |
Registered User
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
|
I proved beyond a shadow of a doubt that an old Chevrolet with 2 cans of 4-cyl. STP in it will drive 450 miles with only ~5psi of oil pressure.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|