CA Wtb 60 to 63 deluxe gauge lens needed

[TBONE1964]

Originally Posted by Budman56

FYI my name is Bud (budman) The paint I used was rust-oleum metallic finish it reacted with the plastic causing it to crack all the way thru the lens and only in the area's that I painted with that paint. that is the first time that has every happen to me. As far as the tester its simple after several failed attempts to build one with resistors, I talked to an electrical engineer and he suggested using a pot so I purchased a 0 to 200 ohm and solder it to a project board from radio shack with some of there alligator leads and a battier hook up. it will test the fuel, temp, as far as the amp I just use a battier and reverse the voltage to see if it will move. I did find out that it only works if the gauge is mounted in the panel for a ground if it out of the metal housing it wont work it has something to do with the grounding. https://www.facebook.com/photo.php?v...type=2&theater
https://www.facebook.com/photo.php?v...type=2&theater

Sorry Bud, I have no idea where I thought your name was Alan. Thank you for the tips on the tester and the paint. I use that same paint to paint screw heads with.

If you want the lens I have, $50.00 shipped to you. I will not be able to ship it until Wednesday. If you want, send a paypal to tbonegarris@yahoo.com.

OR:
If you want to make me up a couple of the testers you made, I will do an even trade with you for the lens.

Let me know and I will get it ready to ship. PM me your address information if you are interested.

Thank you,
Tom