MO need rear hub and drum for a HO52 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ozark Tim · 03-15-2014, 07:51 PM

I am in the throws of a seized rear outer bearing on my 71 C-20 with HO52 and coils and don't expect the hub-drum to be useable once I get it off/if I get it off...
Figure I better see if anyone has one they would sell.
This is for my old beater so doesn't have to be anything special but would like one with all the hardware, washer, lock nuts, bearings etc.
Glad to pay shipping if anyone has one.
Thx Tim

**Dieselwrencher** · 03-17-2014, 01:39 AM

Tim, I have a complete rolling ho52 with no center section I'd sell for $100. Axles, hubs, and drums all appear really nice as it was from a low mileage Nevada truck.

Ozark Tim · 03-17-2014, 07:58 AM

That would sure seem to be the way to go.
do you think it could be shipped on a pallet or is it something I would need yo come get.
thanks Tim

**Dieselwrencher** · 03-17-2014, 08:30 PM

Tim, it can probably be put on a pallet. Cost might kill a guy though. I could ship you the hub and drum stuff you need and then we can work out a time to get the rest to you and I might be able to meet you some where sometime. It can be picked up in mitchellville as well.

Ozark Tim · 03-17-2014, 09:19 PM

Yeah I was afraid that would probably be the case with shipping costs on the whole 3rd member.
I think that would be best to just ship me 1 hub/drum with all the guts in it and I'm sure we can figure out a way for me to get the rest of it sometime as long as you don't have a problem with stashing it away till we figure something out that works for me to come pick up the rest of it.
Shoot me a p.m. with your address and I will send you over payment for the whole thing plus whatever fed ex or ??? shipping for the one hub/drum for now.
I really appreciate it and am dying to get my work truck back to work.
Thx
Tim

**Dieselwrencher** · 03-17-2014, 10:52 PM

Tim, PM sent.

03-15-2014, 07:51 PM	#1
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	need rear hub and drum for a HO52 I am in the throws of a seized rear outer bearing on my 71 C-20 with HO52 and coils and don't expect the hub-drum to be useable once I get it off/if I get it off... Figure I better see if anyone has one they would sell. This is for my old beater so doesn't have to be anything special but would like one with all the hardware, washer, lock nuts, bearings etc. Glad to pay shipping if anyone has one. Thx Tim

03-17-2014, 01:39 AM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: need rear hub and drum for a HO52 Tim, I have a complete rolling ho52 with no center section I'd sell for $100. Axles, hubs, and drums all appear really nice as it was from a low mileage Nevada truck. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-17-2014, 07:58 AM	#3
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: need rear hub and drum for a HO52 That would sure seem to be the way to go. do you think it could be shipped on a pallet or is it something I would need yo come get. thanks Tim

03-17-2014, 08:30 PM	#4
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: need rear hub and drum for a HO52 Tim, it can probably be put on a pallet. Cost might kill a guy though. I could ship you the hub and drum stuff you need and then we can work out a time to get the rest to you and I might be able to meet you some where sometime. It can be picked up in mitchellville as well. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-17-2014, 09:19 PM	#5
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: need rear hub and drum for a HO52 Yeah I was afraid that would probably be the case with shipping costs on the whole 3rd member. I think that would be best to just ship me 1 hub/drum with all the guts in it and I'm sure we can figure out a way for me to get the rest of it sometime as long as you don't have a problem with stashing it away till we figure something out that works for me to come pick up the rest of it. Shoot me a p.m. with your address and I will send you over payment for the whole thing plus whatever fed ex or ??? shipping for the one hub/drum for now. I really appreciate it and am dying to get my work truck back to work. Thx Tim

03-17-2014, 10:52 PM	#6
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: need rear hub and drum for a HO52 Tim, PM sent. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.