CeeTen's build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ceeten · 11-24-2012, 10:08 AM

Posted via Mobile Device

Ceeten · 11-24-2012, 10:12 AM

Well this is how she sits now. Those are not the wheels I'm gonna use, but will use that size and offset.

Posted via Mobile Device

lsxponcho · 11-24-2012, 11:54 AM

Nice work on the 4 link / air bar or what ever you call that sweet looking setup. Temp Wheels look killer too, I have a soft spot for coys. Looks like you showed that tail gate who's boss...lazer striaght. Keep up the good work!

Ceeten · 11-24-2012, 12:15 PM

Quote:

Originally Posted by lsxponcho

Nice work on the 4 link / air bar or what ever you call that sweet looking setup. Temp Wheels look killer too, I have a soft spot for coys. Looks like you showed that tail gate who's boss...lazer striaght. Keep up the good work!

Thanks! I love the Coys also but they belong to a good bud and I don't want to run the same wheels. That's what I was originally gonna run but I guess I'll keep my mouth shut about my plans now lol.
Posted via Mobile Device

king-918 · 11-24-2012, 01:30 PM

Quote:

Originally Posted by Ceeten

Well this is how she sits now. Those are not the wheels I'm gonna use, but will use that size and offset.

Posted via Mobile Device

what's the size and offset, and also what does the inside bed look like?

Ceeten · 11-24-2012, 01:42 PM

20x8.5 front, 5" backspace with 245-40. 20x10 rear, 5.5" backspace with 295-40. I may run 315 in the rear. Gonna be close. Inside of bed is stock. At full dump the rear end barely touches bed floor.
Posted via Mobile Device

STOCKISH · 11-24-2012, 10:13 PM

Looks killer.

slammed427 · 11-25-2012, 12:57 AM

Super clean! I personally wouldn't run a large diameter 5 spoke, I'm burned out on them.I'll be following along to see it to the end.

Ceeten · 11-25-2012, 02:16 PM

Quote:

Originally Posted by slammed427

Super clean! I personally wouldn't run a large diameter 5 spoke, I'm burned out on them.I'll be following along to see it to the end.

Thanks, for the wheels, Im looking for more of a pro-touring look.

Ceeten · 11-25-2012, 02:20 PM

Quote:

Originally Posted by 1972SuperCheyenne

Looks killer.

Thanks!

slammed427 · 11-26-2012, 09:19 AM

Quote:

Originally Posted by Ceeten

Thanks, for the wheels, Im looking for more of a pro-touring look.

Sweet! I think thats the direction I'm gonna go on my next project as well, but more of a "slotouring" hehe
Posted via Mobile Device

**LEEVON** · 03-12-2013, 09:25 PM

Any updates?

Project82 · 02-12-2014, 12:51 AM

I know this thread is kinda old but.... I'M DYING TO KNOW WHAT HAPPENED TO THIS BUILD!

Awesome work!

Ceeten · 02-12-2014, 07:26 PM

Unfortunately, it's on the back burner. I got sidetracked with a supercharged Z06 Corvette. I will get to it one day, I promise!

Project82 · 02-14-2014, 01:08 AM

Ohhh OK! As long as you haven't sold it! What year 'Vette? Sounds fun!

DrppdBlazr · 02-14-2014, 02:06 AM

Sweet looking build man. Vette....yes please

Ceeten · 02-14-2014, 02:27 AM

It's a 2002. A&A Vortech V3, Mayhem 2 cam, Kooks headers, high flow cats and x pipe, Borla stingers. Makes 607hp/520tq to the wheels. It's a blast!

http://youtu.be/75vXsoavEgE

And nah, I'll never sell the truck. I'll get it done :-)

Project82 · 03-18-2014, 07:42 PM

Quote:

Originally Posted by Ceeten

I'll never sell the truck. I'll get it done :-)

Awesome sounding 'Vette! I say the same thing when people ask me! No cash will ever equal up to the sentimental value!

Keep it up!

11-24-2012, 10:08 AM	#76
Ceeten Registered User Join Date: Oct 2009 Location: Jay, Fl Posts: 126	Re: CeeTen's build Posted via Mobile Device

11-24-2012, 10:12 AM	#77
Ceeten Registered User Join Date: Oct 2009 Location: Jay, Fl Posts: 126	Re: CeeTen's build Well this is how she sits now. Those are not the wheels I'm gonna use, but will use that size and offset. Posted via Mobile Device

11-24-2012, 11:54 AM	#78
lsxponcho Registered User Join Date: Jul 2012 Location: Cheadle, Alberta Posts: 78	Re: CeeTen's build Nice work on the 4 link / air bar or what ever you call that sweet looking setup. Temp Wheels look killer too, I have a soft spot for coys. Looks like you showed that tail gate who's boss...lazer striaght. Keep up the good work!

11-24-2012, 01:42 PM	#81
Ceeten Registered User Join Date: Oct 2009 Location: Jay, Fl Posts: 126	Re: CeeTen's build 20x8.5 front, 5" backspace with 245-40. 20x10 rear, 5.5" backspace with 295-40. I may run 315 in the rear. Gonna be close. Inside of bed is stock. At full dump the rear end barely touches bed floor. Posted via Mobile Device

11-24-2012, 10:13 PM	#82
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: CeeTen's build Looks killer. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-25-2012, 12:57 AM	#83
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: CeeTen's build Super clean! I personally wouldn't run a large diameter 5 spoke, I'm burned out on them.I'll be following along to see it to the end. __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

03-12-2013, 09:25 PM	#87
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: CeeTen's build Any updates? __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

02-12-2014, 12:51 AM	#88
Project82 Bretzke Racing Inc. Join Date: Jun 2008 Location: Houston, Texas Posts: 114	Re: CeeTen's build I know this thread is kinda old but.... I'M DYING TO KNOW WHAT HAPPENED TO THIS BUILD! Awesome work! __________________ 1982 Chevy Silverado C-10 RCLWB - IN PAINT - Inferno Orange Metallic Lowered 4.5/6 - 358 SBC 10.5:1, Comp XE268H cam, Aluminum heads, 650 Double pumper Holley carb, 2400 Holeshot Converter, upgraded T/h350 Trans. Stock Rear end for now (3.08 gear) 2004 Chevy Silverado 1500 LS RCSWB - Dark Spiral Gray Metallic Lowered 2/4 - 4.8L V8 4L60E 10-bolt. some goodies --- NEW DD 11/9/12 "Expect the Un-expected" "Gas, Grass, Or Ass...No one rides for FREE!"

02-12-2014, 07:26 PM	#89
Ceeten Registered User Join Date: Oct 2009 Location: Jay, Fl Posts: 126	Re: CeeTen's build Unfortunately, it's on the back burner. I got sidetracked with a supercharged Z06 Corvette. I will get to it one day, I promise!

02-14-2014, 01:08 AM	#90
Project82 Bretzke Racing Inc. Join Date: Jun 2008 Location: Houston, Texas Posts: 114	Re: CeeTen's build Ohhh OK! As long as you haven't sold it! What year 'Vette? Sounds fun! __________________ 1982 Chevy Silverado C-10 RCLWB - IN PAINT - Inferno Orange Metallic Lowered 4.5/6 - 358 SBC 10.5:1, Comp XE268H cam, Aluminum heads, 650 Double pumper Holley carb, 2400 Holeshot Converter, upgraded T/h350 Trans. Stock Rear end for now (3.08 gear) 2004 Chevy Silverado 1500 LS RCSWB - Dark Spiral Gray Metallic Lowered 2/4 - 4.8L V8 4L60E 10-bolt. some goodies --- NEW DD 11/9/12 "Expect the Un-expected" "Gas, Grass, Or Ass...No one rides for FREE!"

02-14-2014, 02:06 AM	#91
DrppdBlazr Registered User Join Date: Dec 2012 Location: Mesa, AZ Posts: 276	Re: CeeTen's build Sweet looking build man. Vette....yes please __________________ Bodied Blazer Build http://67-72chevytrucks.com/vboard/s...d.php?t=611842

02-14-2014, 02:27 AM	#92
Ceeten Registered User Join Date: Oct 2009 Location: Jay, Fl Posts: 126	Re: CeeTen's build It's a 2002. A&A Vortech V3, Mayhem 2 cam, Kooks headers, high flow cats and x pipe, Borla stingers. Makes 607hp/520tq to the wheels. It's a blast! http://youtu.be/75vXsoavEgE And nah, I'll never sell the truck. I'll get it done :-)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.