|
03-21-2014, 11:33 PM
|
#1 |
|
Registered User
Join Date: Jan 2013
Location: Los Angeles
Posts: 903
|
Tilt steering column
Any one know if any of the new tilt columns are shorter the the old ones ? I have an non tilt right now but would like to get further away from the steering wheel . So I wanted to know if I were to get a title if they are any shorter then the original ones .
__________________
1969 C20 CUSTOM "RUMBLEr" |
|
|
|
03-22-2014, 12:20 AM
|
#2 |
|
Registered User
Join Date: Dec 2011
Location: Hanford Ca.
Posts: 68
|
Re: Tilt steering column
Contact Kevsclassic on here. He is the best for columns.
|
|
|
|
|
03-22-2014, 09:18 AM
|
#3 |
|
2WD Jimmy
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: Tilt steering column
^ Yup
|
|
|
|
|
03-22-2014, 09:35 AM
|
#4 |
|
Registered User
Join Date: Nov 2012
Location: 9
Posts: 862
|
Re: Tilt steering column
I believe the truck tilts are the same length as the standard column. Van tilts are slightly longer than both. I would assume any aftermarket columns would be modeled after the original truck columns. You might be able to get a universal tilt that might be shorter though.
You can shorten the steering shaft between the column and the steering box in order to move the column farther forward |
|
|
|
|
03-22-2014, 11:13 AM
|
#5 |
|
Registered User
Join Date: Nov 2011
Location: Idaho
Posts: 857
|
Re: Tilt steering column
I used a van column, just collapse the lower shaft and move the column down closer to the cluster works fine.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
