Converting to Power Steering 68 c10 6cyl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**NC67Chev** · 03-24-2014, 12:00 PM

Don't forget that you can go to one of the parts stores and borrow tools such as pitman arm pullers and pickle forks

sambudo · 03-25-2014, 12:05 AM

Quote:

Originally Posted by NC67Chev

Don't forget that you can go to one of the parts stores and borrow tools such as pitman arm pullers and pickle forks

I got the gear off, yeah! Borrowed tool from neighbor. Still have the rag joint connected. I took the nuts off the bolts but but its still attached. I really need to spend some time on it. Maybe its stuck on.

STRANGE THING happened my steering wheel makes a grinding noise when I spin it around. What do you think caused this? Could my steering wheel bearing possibly be out?

**NC67Chev** · 03-25-2014, 07:31 AM

I don't know what to tell you about the steering wheel.

03-24-2014, 12:00 PM	#1
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 699	Re: Converting to Power Steering 68 c10 6cyl Don't forget that you can go to one of the parts stores and borrow tools such as pitman arm pullers and pickle forks __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

03-25-2014, 07:31 AM	#3
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 699	Re: Converting to Power Steering 68 c10 6cyl I don't know what to tell you about the steering wheel. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.