Skokie to the courtesy phone, pics here! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 12-30-2003, 07:52 PM

Here is the collapsable shaft. Where my finger is....

Tx Firefighter · 12-30-2003, 07:55 PM

The shaft unbolts off of the column. The end of the column is splined where it goes on.

Depending on which tilt you use, the collapsing shaft might need to be shortened a bit.

My stock non-tilt auto column has the shaft built onto it. There is no way to remove it and put it on another column. Just use a shaft off of a 3 speed column shift standard trans truck. They remove. Collapse as needed to fit.

meathead95 · 12-30-2003, 08:32 PM

every auto non tilt column i have ever had (5 or 6) the shaft comes off just like all the others

skokie · 12-30-2003, 09:33 PM

Tx Firefighter

Thanks a bunch. Thats what I needed.

Tx Firefighter · 12-30-2003, 10:31 PM

Meathead.........

skokie · 12-30-2003, 10:44 PM

Tx
Can you show us whats to the right of that last pic you posted?

Thanks

Tx Firefighter · 12-30-2003, 10:52 PM

skokie · 12-30-2003, 11:06 PM

Thanks again.

bbs1965 · 12-30-2003, 11:08 PM

your not using a big enuff torch

I'll get it unbolted

meathead95 · 12-31-2003, 01:44 AM

it should come apart right where the big washer and the collar missing the bolt is that pic looks like a van tilt with the shaft already collapsed
i have a true truck tilt a van tilt and an auto non tilt column in the garage if you would like i will take a pic of all three tomorrow.

Tx Firefighter · 12-31-2003, 02:00 AM

Meathead, I know you're right. I've had them that were 2 piece too.

But, not this one. It's a stock auto column out of a 68 truck. I went ahead and took the shaft all the way out. It's not sectioned like the other ones are. 1 piece all the way down to the collapse section.

I layed it next to another shaft out of a normal 2 piece type column.

See pic......

12-30-2003, 07:52 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Skokie to the courtesy phone, pics here! Here is the collapsable shaft. Where my finger is.... __________________ I'm on the Instagram- @Gearhead_Kevin

12-30-2003, 07:55 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The shaft unbolts off of the column. The end of the column is splined where it goes on. Depending on which tilt you use, the collapsing shaft might need to be shortened a bit. My stock non-tilt auto column has the shaft built onto it. There is no way to remove it and put it on another column. Just use a shaft off of a 3 speed column shift standard trans truck. They remove. Collapse as needed to fit. __________________ I'm on the Instagram- @Gearhead_Kevin

12-30-2003, 08:32 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	every auto non tilt column i have ever had (5 or 6) the shaft comes off just like all the others __________________ 72 2wd blazer 72 swb 4x4

12-30-2003, 10:31 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Meathead......... __________________ I'm on the Instagram- @Gearhead_Kevin

12-30-2003, 10:52 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	__________________ I'm on the Instagram- @Gearhead_Kevin

12-30-2003, 09:33 PM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Tx Firefighter Thanks a bunch. Thats what I needed.

12-30-2003, 10:44 PM	#6
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Tx Can you show us whats to the right of that last pic you posted? Thanks

12-30-2003, 11:06 PM	#8
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Thanks again.

12-30-2003, 11:08 PM	#9
bbs1965 Open Sundays 10 till 10 Join Date: Nov 2000 Location: Waxahachie,Texas 75165 Posts: 1,009	your not using a big enuff torch I'll get it unbolted __________________ 817-846-5476 parts for sale always 30 minutes south of Dallas on I35 WWW.BBSAutoSalvage.com bbs1969@direcway.com

12-31-2003, 01:44 AM	#10
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	it should come apart right where the big washer and the collar missing the bolt is that pic looks like a van tilt with the shaft already collapsed i have a true truck tilt a van tilt and an auto non tilt column in the garage if you would like i will take a pic of all three tomorrow. __________________ 72 2wd blazer 72 swb 4x4

12-31-2003, 02:00 AM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Meathead, I know you're right. I've had them that were 2 piece too. But, not this one. It's a stock auto column out of a 68 truck. I went ahead and took the shaft all the way out. It's not sectioned like the other ones are. 1 piece all the way down to the collapse section. I layed it next to another shaft out of a normal 2 piece type column. See pic...... __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.