One Ton Pic Request (Rear Frame) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigBlockBurris · 03-20-2014, 08:33 AM

Does anybody have a pic of a one ton truck (133" wheelbase) with no bed on it? I specifically need a pic of the frame from behind the cab to the end of the frame. I have '71 ton, and I need to verify number and location of crossmembers. I think I may be missing a few.

Thanks in advance.

BBB

swamp rat · 03-20-2014, 11:26 PM

Maybe give this guy a PM???

http://67-72chevytrucks.com/vboard/s...9&postcount=29

crazy longhorn · 03-21-2014, 02:06 AM

Quote:

Originally Posted by BigBlockBurris

Does anybody have a pic of a one ton truck (133" wheelbase) with no bed on it? I specifically need a pic of the frame from behind the cab to the end of the frame. I have '71 ton, and I need to verify number and location of crossmembers. I think I may be missing a few.

Thanks in advance.

BBB

After the trans crossmember, is one right @ the rear of the cab (center bearing support on the D-shaft),then @ the front of the leaf hangers, & the last one tween the rear leaf hangers....Longhorn, on a 133" base

SS Tim · 03-21-2014, 06:46 AM

Picture enough or do you need a drawing?
Send me your email if you need it (fullsize).

BigBlockBurris · 03-21-2014, 12:30 PM

Thank you both for the reply.

The pic Tim put is exactly what I was hoping for.
I am missing the rear most crossmember.

Thanks again!

BBB

SS Tim · 03-21-2014, 02:38 PM

One more then.

BigBlockBurris · 03-22-2014, 01:08 PM

Tim,

Thank you again. That rear cross member is exactly the one I am missing and that I need.

Got one?

Thanks!

Alex

BigBlockBurris · 03-23-2014, 05:43 PM

What I need!!! BAD!!!!

SS Tim · 03-23-2014, 06:11 PM

Guess someone thought that the receiver hitch was enough.

As far as locating one. Dude, I live in California.

However Jenn and Jeremiah King may very well have one but shipping could be expensive to NC. www.kingstrucks.com
They are members here on the board jeremiah king
http://67-72chevytrucks.com/vboard/member.php?u=41714

Might be best to find a local cut off frame section and someone to huck fasten the crossmember into your truck.

BigBlockBurris · 03-23-2014, 07:23 PM

Tim-I know shipping would kill the deal, I was just picking.

I have looked local with no luck.

Thanks again for your pics, and help. It appears that whoever removed mine, did a neat job, thank goodness. I hope to find another to put back.
I agree, the hitch is not enough.

BBB

**uncle** · 03-23-2014, 07:33 PM

Wouldn't 3/4 be the same on leaf spring truck?

**NC67Chev** · 03-23-2014, 07:34 PM

Quote:

Originally Posted by BigBlockBurris

Tim-I know shipping would kill the deal, I was just picking.

I have looked local with no luck.

Thanks again for your pics, and help. It appears that whoever removed mine, did a neat job, thank goodness. I hope to find another to put back.
I agree, the hitch is not enough.

BBB

Have you checked with Whites in Germanton? If not, it might be worth a call.

SS Tim · 03-23-2014, 08:02 PM

Quote:

Originally Posted by uncle

Wouldn't 3/4 be the same on leaf spring truck?

Good point!

Looked it up in the parts manual and the service part only fits 30s and 133"wb 20s (Longhorns).

There are different numbers for 10-20 applications.

Good news is the part seems to backfit to 1955.

BarryB · 03-23-2014, 08:52 PM

Let me look, tomorrow, I have a 1 ton I am parting out, the frame rails had some rot so I am cutting it up.

**kwmech** · 03-23-2014, 11:52 PM

What you need is a frame with the inside measurement of about 4.25'' and a center to center on the back most rivet of 31''. I just measured my longhorn x-member

BarryB · 03-24-2014, 06:57 PM

Here are the couple pics of mine, Sorry but I've got a fuel tank sitting there. fit nicely inside the frame rails so it doesn't roll.

03-20-2014, 08:33 AM	#1
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	One Ton Pic Request (Rear Frame) PICS ADDED!!! Does anybody have a pic of a one ton truck (133" wheelbase) with no bed on it? I specifically need a pic of the frame from behind the cab to the end of the frame. I have '71 ton, and I need to verify number and location of crossmembers. I think I may be missing a few. Thanks in advance. BBB Last edited by BigBlockBurris; 03-23-2014 at 05:53 PM.

03-20-2014, 11:26 PM	#2
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: One Ton Pic Request (Rear Frame) Maybe give this guy a PM??? http://67-72chevytrucks.com/vboard/s...9&postcount=29 __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

03-21-2014, 06:46 AM	#4
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: One Ton Pic Request (Rear Frame) Picture enough or do you need a drawing? Send me your email if you need it (fullsize). Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-21-2014, 12:30 PM	#5
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: One Ton Pic Request (Rear Frame) Thank you both for the reply. The pic Tim put is exactly what I was hoping for. I am missing the rear most crossmember. Thanks again! BBB

03-21-2014, 02:38 PM	#6
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: One Ton Pic Request (Rear Frame) One more then. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-22-2014, 01:08 PM	#7
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: One Ton Pic Request (Rear Frame) Tim, Thank you again. That rear cross member is exactly the one I am missing and that I need. Got one? Thanks! Alex

03-23-2014, 05:43 PM	#8
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: One Ton Pic Request (Rear Frame) What I need!!! BAD!!!! Attached Images

03-23-2014, 06:11 PM	#9
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: One Ton Pic Request (Rear Frame) Guess someone thought that the receiver hitch was enough. As far as locating one. Dude, I live in California. However Jenn and Jeremiah King may very well have one but shipping could be expensive to NC. www.kingstrucks.com They are members here on the board jeremiah king http://67-72chevytrucks.com/vboard/member.php?u=41714 Might be best to find a local cut off frame section and someone to huck fasten the crossmember into your truck. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

03-23-2014, 07:23 PM	#10
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: One Ton Pic Request (Rear Frame) Tim-I know shipping would kill the deal, I was just picking. I have looked local with no luck. Thanks again for your pics, and help. It appears that whoever removed mine, did a neat job, thank goodness. I hope to find another to put back. I agree, the hitch is not enough. BBB

03-23-2014, 07:33 PM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: One Ton Pic Request (Rear Frame) Wouldn't 3/4 be the same on leaf spring truck?

03-23-2014, 08:52 PM	#14
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: One Ton Pic Request (Rear Frame) Let me look, tomorrow, I have a 1 ton I am parting out, the frame rails had some rot so I am cutting it up. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

03-23-2014, 11:52 PM	#15
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,499	Re: One Ton Pic Request (Rear Frame) What you need is a frame with the inside measurement of about 4.25'' and a center to center on the back most rivet of 31''. I just measured my longhorn x-member

03-24-2014, 06:57 PM	#16
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: One Ton Pic Request (Rear Frame) Here are the couple pics of mine, Sorry but I've got a fuel tank sitting there. fit nicely inside the frame rails so it doesn't roll. Attached Images __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.