WTB:SWB Rolling Frame in NC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joerocks · 12-14-2003, 03:22 AM

i am looking for a swb rolling frame near fayetteville nc or a cheap swb project truck chevy or gmc prefer gmc though thanks

joe

moodyholler · 12-14-2003, 03:16 PM

Joerocks, I have a 68 stepsied short wheelbase, 6 cyl. 3 spd no engine. Usual rust but all there. extra bedsides and fenders for the bed no as bad as usual. good tile, pics avail. 600.00Moodyholler in Roanoke,Va. 540-427-2719

moodyholler · 12-14-2003, 03:18 PM

Oh yes, I have a 68 gmc sb also rough usual rust. no motor or tranny. Leaf springs.400.00

joerocks · 12-14-2003, 11:05 PM

moody could you please email pics to jbcombs21@msn.com thanks-joe
i forgot to ask do you have title for both??

moodyholler · 12-14-2003, 11:34 PM

No title for the 68 gmc. Was only saving it for the frame. And rear end. Moodyholler

joerocks · 12-15-2003, 02:51 AM

roanoke is a bit far, would be after the holidays before i could come and see it the truck looks like what i am looking for though please keep me posted if you sell it i am definitly interested thanks- joe

bebop52 · 12-17-2003, 11:41 AM

I have a friend with several close by.Are you planning to swap your body onto a short chassis and bed combo or do you need a cab and title with it. Let me know what you plan to do and I will find out exactly what he has right now and some prices.Thanks Bob

joerocks · 12-17-2003, 02:54 PM

here is what i am looking for i am stationed in NC and my 71 gmc is in KY so i am looking for a cheap project that i can keep on my trailer while i work on it (for that just a frame would be better) because i don't have a garage at my apartment to keep a truck in my gmc has a good cab and i will swap it if i can find only a frame or if i can find a complete truck cheap enough then i will buy the whole thing basicly i am just looking for a project here since i only get to ky a couple of weeks a year (talking about a slow process) and i do spend alot of hrs at work so i can't drive very far without at least a couple of weeks notice thanks for all the info everybody-JOE

bebop52 · 12-17-2003, 04:52 PM

My friend has 1 5lug swb frame,ps box and 7in rallies$400 also 373 gears.He has 2 6 lug swb frames,1 is 373 rear other is 308.both have deep rallies $400 for either

Destructo · 12-17-2003, 05:01 PM

If you want call Hamby Motors in Pfafftown, NC he deals in a lot of old trucks and may have a line on something.

(336)945-3712 is his phone number. Tell him Chad sent ya

joerocks · 12-17-2003, 06:40 PM

thanks for all the info-joe

*Pardue'sCustoms* · 12-18-2003, 01:18 AM

i have a swb frame no suspension i am about 30 min from you and i have a 71 swb fore sale to pm

joerocks · 12-31-2003, 09:12 AM

search is over i couldn't pass up a deal i came across for a 81 camaro thanks for everything everybody -joe

12-14-2003, 03:22 AM	#1
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	WTB:SWB Rolling Frame in NC i am looking for a swb rolling frame near fayetteville nc or a cheap swb project truck chevy or gmc prefer gmc though thanks joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

12-14-2003, 03:16 PM	#2
moodyholler Registered User Join Date: Dec 2003 Location: Roanoke,Virginia Posts: 179	frames Joerocks, I have a 68 stepsied short wheelbase, 6 cyl. 3 spd no engine. Usual rust but all there. extra bedsides and fenders for the bed no as bad as usual. good tile, pics avail. 600.00Moodyholler in Roanoke,Va. 540-427-2719 __________________ 1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD

12-14-2003, 03:18 PM	#3
moodyholler Registered User Join Date: Dec 2003 Location: Roanoke,Virginia Posts: 179	Oh yes, I have a 68 gmc sb also rough usual rust. no motor or tranny. Leaf springs.400.00 __________________ 1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD

12-14-2003, 11:05 PM	#4
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	moody could you please email pics to jbcombs21@msn.com thanks-joe i forgot to ask do you have title for both?? __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400 Last edited by joerocks; 12-14-2003 at 11:10 PM.

12-14-2003, 11:34 PM	#5
moodyholler Registered User Join Date: Dec 2003 Location: Roanoke,Virginia Posts: 179	No title for the 68 gmc. Was only saving it for the frame. And rear end. Moodyholler __________________ 1998 WRANGLER I-6 auto 1972 LWB FLEETSIDE 1968 GMC SWB STEPSIDE 1994 C-1500 SWB 4.3 5 SPD

12-15-2003, 02:51 AM	#6
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	roanoke is a bit far, would be after the holidays before i could come and see it the truck looks like what i am looking for though please keep me posted if you sell it i am definitly interested thanks- joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

12-17-2003, 11:41 AM	#7
bebop52 Registered User Join Date: Sep 2002 Location: Clarkton NC Posts: 44	swb frame I have a friend with several close by.Are you planning to swap your body onto a short chassis and bed combo or do you need a cab and title with it. Let me know what you plan to do and I will find out exactly what he has right now and some prices.Thanks Bob

12-17-2003, 02:54 PM	#8
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	here is what i am looking for i am stationed in NC and my 71 gmc is in KY so i am looking for a cheap project that i can keep on my trailer while i work on it (for that just a frame would be better) because i don't have a garage at my apartment to keep a truck in my gmc has a good cab and i will swap it if i can find only a frame or if i can find a complete truck cheap enough then i will buy the whole thing basicly i am just looking for a project here since i only get to ky a couple of weeks a year (talking about a slow process) and i do spend alot of hrs at work so i can't drive very far without at least a couple of weeks notice thanks for all the info everybody-JOE __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

12-17-2003, 04:52 PM	#9
bebop52 Registered User Join Date: Sep 2002 Location: Clarkton NC Posts: 44	frame My friend has 1 5lug swb frame,ps box and 7in rallies$400 also 373 gears.He has 2 6 lug swb frames,1 is 373 rear other is 308.both have deep rallies $400 for either

12-17-2003, 05:01 PM	#10
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	If you want call Hamby Motors in Pfafftown, NC he deals in a lot of old trucks and may have a line on something. (336)945-3712 is his phone number. Tell him Chad sent ya

12-17-2003, 06:40 PM	#11
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	thanks for all the info-joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

12-18-2003, 01:18 AM	#12
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	i have a swb frame no suspension i am about 30 min from you and i have a 71 swb fore sale to pm

12-31-2003, 09:12 AM	#13
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	search is over i couldn't pass up a deal i came across for a 81 camaro thanks for everything everybody -joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.