Chevy D60 for sale SRW... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

90blzr · 12-29-2003, 04:21 PM

Great shape, new inner and outter hub bearings, fresh rotors, new calipers, new pinion seal, hub seals, new wheel studs etc. 4.10 open. complete minus lockouts. Will deliver within reasonable distance. Has stock steering arm, tierod, etc. $1600
email me with questions at elcoholic71@yahoo.com

Destructo · 12-29-2003, 04:44 PM

Wow, 1600 dollars? Are you nuts?

leadfoot067 · 12-29-2003, 05:28 PM

no hes not nutz.....thats the goin price for that front diff....

90blzr · 12-29-2003, 05:59 PM

What leadfoot said. I see people all the time spending $1000-$1200 on ones they gotta rebuild and do this and that to. Me personally, I would rather buy one that doesnt need anything and throw it in and run it. But thats just me. Also depends where you are from. Maybe if you (not you personally) live out in the boonies where there is nothin but farm land, you can get them for cheap, not around here though. I see them from $12-$1800.
Btw, no need to reply to my post if you arent interested

**kwmech** · 12-29-2003, 06:11 PM

I have had to pay upwards of 1200. for a core and then put another 1000.-1500. to go completely through and re gear it.

Scrub · 12-30-2003, 02:27 AM

Mine was $1800 for a new one that came from a State of Oregon surplus auction. Start diggin through them old junkyards. What is odd to me is many times you can buy the whole truck for 1200 bucks because a lot of people don't know what they have.

playtoy1 · 12-30-2003, 12:34 PM

thats odd
i have a 81 chevy with a dana 60 front and 14 bolt forsale on this board for 1000.00 and not many people have even replied to this post so in my opinion yes 1600.00 is high priced

Destructo · 12-30-2003, 01:47 PM

Its usually cheaper to just buy a whole truck, if somebody wants just the D60 they don't want a big K30 sitting in their back yard hehe. If I had 1000 bucks I would probably buy that truck from ya, but I don't have any extra money right now.

1969 GMC · 12-30-2003, 03:35 PM

It may not make sense, but it is a fair price. Remember, if you buy a K/30 for $1k and take the front axle, you gotta do something with the rest of it...and not everyone can just go park it in the lower 40 and never have to look at it again. Plus buying a whole truck, you might not know what condition the axle is in, with this you get an axle that is entirely reworked, plus no headache of where to put the rest of the truck, or the headache of removing the axle itself from the truck. Good luck with your sale.
also, playtoy1, you have PM.

**Yukon Jack** · 12-30-2003, 04:52 PM

playtoy1 - wish you were closer, dang.

90blzr, have you posted over at coloradok5? I would thank you would have some bites, lots of California people on that board.

72addict · 12-31-2003, 07:20 AM

Hey playtoy, where is Hershey?

playtoy1 · 12-31-2003, 11:18 AM

72addict hersey is located just north of big rapids about two hours from you

72addict · 12-31-2003, 11:19 AM

truck still available?

playtoy1 · 12-31-2003, 11:35 AM

yes and you have mail

12-29-2003, 04:21 PM	#1
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	Chevy D60 for sale SRW... Great shape, new inner and outter hub bearings, fresh rotors, new calipers, new pinion seal, hub seals, new wheel studs etc. 4.10 open. complete minus lockouts. Will deliver within reasonable distance. Has stock steering arm, tierod, etc. $1600 email me with questions at elcoholic71@yahoo.com

12-29-2003, 05:28 PM	#3
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	no hes not nutz.....thats the goin price for that front diff.... __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

12-30-2003, 02:27 AM	#6
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	Mine was $1800 for a new one that came from a State of Oregon surplus auction. Start diggin through them old junkyards. What is odd to me is many times you can buy the whole truck for 1200 bucks because a lot of people don't know what they have. __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

12-30-2003, 03:35 PM	#9
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	It may not make sense, but it is a fair price. Remember, if you buy a K/30 for $1k and take the front axle, you gotta do something with the rest of it...and not everyone can just go park it in the lower 40 and never have to look at it again. Plus buying a whole truck, you might not know what condition the axle is in, with this you get an axle that is entirely reworked, plus no headache of where to put the rest of the truck, or the headache of removing the axle itself from the truck. Good luck with your sale. also, playtoy1, you have PM. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650 Last edited by 1969 GMC; 12-30-2003 at 03:39 PM.

12-30-2003, 04:52 PM	#10
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	playtoy1 - wish you were closer, dang. 90blzr, have you posted over at coloradok5? I would thank you would have some bites, lots of California people on that board. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

12-29-2003, 04:44 PM	#2
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Wow, 1600 dollars? Are you nuts?

12-29-2003, 05:59 PM	#4
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	What leadfoot said. I see people all the time spending $1000-$1200 on ones they gotta rebuild and do this and that to. Me personally, I would rather buy one that doesnt need anything and throw it in and run it. But thats just me. Also depends where you are from. Maybe if you (not you personally) live out in the boonies where there is nothin but farm land, you can get them for cheap, not around here though. I see them from $12-$1800. Btw, no need to reply to my post if you arent interested

12-29-2003, 06:11 PM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	I have had to pay upwards of 1200. for a core and then put another 1000.-1500. to go completely through and re gear it.

12-30-2003, 12:34 PM	#7
playtoy1 Registered User Join Date: Apr 2003 Location: chase,michigan Posts: 39	thats odd i have a 81 chevy with a dana 60 front and 14 bolt forsale on this board for 1000.00 and not many people have even replied to this post so in my opinion yes 1600.00 is high priced

12-30-2003, 01:47 PM	#8
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Its usually cheaper to just buy a whole truck, if somebody wants just the D60 they don't want a big K30 sitting in their back yard hehe. If I had 1000 bucks I would probably buy that truck from ya, but I don't have any extra money right now.

12-31-2003, 07:20 AM	#11
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	Hey playtoy, where is Hershey? __________________ 1957 Cameo

12-31-2003, 11:18 AM	#12
playtoy1 Registered User Join Date: Apr 2003 Location: chase,michigan Posts: 39	72addict hersey is located just north of big rapids about two hours from you

12-31-2003, 11:19 AM	#13
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	playtoy truck still available? __________________ 1957 Cameo

12-31-2003, 11:35 AM	#14
playtoy1 Registered User Join Date: Apr 2003 Location: chase,michigan Posts: 39	yes and you have mail



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.