|
03-04-2014, 07:58 AM
|
#1 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Damans '72 K10
I've always loved these pickups.
41st birthday present to myself The day I picked it up  At home with the kids '82 El Camino and my fun pickup '48 KB2 International  I ran my hand through the saw at work. So it took me awhile to start working on it  As close to original as I've seen  interior needs work  
|
|
|
|
03-04-2014, 08:02 AM
|
#2 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
I started off with the HEI swap
 Didn't have a rear bumper. I have a Goodmark dealer really close to me. So I called him up  I had to replace the Edelbrock 
|
|
|
|
|
03-04-2014, 08:12 AM
|
#3 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
My interior order came in from Brothers and I'm just waiting for some nice weather to start that project.
I was able to get my marker lights and side marker lights installed   Then the snow hit. A little at first  Then it dumped on us. This is my traveler at work. We broke records here in Montana 
|
|
|
|
|
03-16-2014, 04:52 PM
|
#4 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
Finally had a weekend that I could actually get stuff done
New wheels and tires  W/O rear bumper  W rear bumper  Passenger side  Rear Drivers  Front passenger 
|
|
|
|
|
03-16-2014, 04:59 PM
|
#5 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
I thought I'd pass this along.
I just put these new turn signal lights on from Brothers. I drove about 4 miles total today and I was just looking at the pickup before I went inside and noticed all the trim rings were off the marker lights. The front passenger had both on and I tried to pull them off. The first one fell into my hand and the second was held on with one corner of glue. I'm sure every parts place gets them from the same supplier but this is unacceptable  
|
|
|
|
|
03-18-2014, 07:32 PM
|
#6 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
More interior parts are showing up
|
|
|
|
|
03-23-2014, 07:30 AM
|
#7 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
Started pulling the interior apart to get these parts installed
my SPID  Some random under dash pics    Almost done.  tinted the side and vent windows inside. The rear will have to wait until it gets a little warmer 
|
|
|
|
|
03-30-2014, 11:36 AM
|
#8 |
|
Registered User
Join Date: Jun 2013
Location: billings, mt
Posts: 703
|
Re: Damans '72 K10
nice truck, we'll have to meet up sometime. I know once the Thursday cruises start up I'm usually out there every week.
__________________
1969 Chevy C10 2wd stepside longbox |
|
|
|
|
03-30-2014, 07:32 PM
|
#9 |
|
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Damans '72 K10
Sandblasted all my inner door parts
 Got my dash pad cluster and stereo installed this weekend  Also my doors almost finished up, The reason I say that is I just ordered some parts for them and they showed up after I had them back together. I was kinda itchin' to get going 
|
|
|
|
|
03-30-2014, 08:21 PM
|
#10 |
|
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
Re: Damans '72 K10
thats a clean truck! cool that it has the original cab lights too.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
