Skokie, column pics round 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 12-31-2003, 09:38 PM

You need this little bracket. It bolts to the firewall with 2 bolts. Then, you use that round clamp to clamp the steering column to this bracket.

Tx Firefighter · 12-31-2003, 09:40 PM

Here's it all installed in place. It's hard to see exactly whats going on, because it's all painted the same color.

This picture is taken from where the engine should sit.

Tx Firefighter · 12-31-2003, 09:43 PM

Then, you bolt the intermediate shaft into place between the column and steering box. Collapse as needed.

Mine is a motorhome column and it was exactly the same length as the original, so no collapsing was needed.

Collapsing the shaft is easy to do if you have to. I've done it before when installing van tilts.

skokie · 12-31-2003, 09:44 PM

Tx Firefighter

Thanks for the pics. I finally found that bracket last night.

HAHA

12-31-2003, 09:38 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Skokie, column pics round 3 You need this little bracket. It bolts to the firewall with 2 bolts. Then, you use that round clamp to clamp the steering column to this bracket. __________________ I'm on the Instagram- @Gearhead_Kevin

12-31-2003, 09:40 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Here's it all installed in place. It's hard to see exactly whats going on, because it's all painted the same color. This picture is taken from where the engine should sit. __________________ I'm on the Instagram- @Gearhead_Kevin

12-31-2003, 09:43 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Then, you bolt the intermediate shaft into place between the column and steering box. Collapse as needed. Mine is a motorhome column and it was exactly the same length as the original, so no collapsing was needed. Collapsing the shaft is easy to do if you have to. I've done it before when installing van tilts. __________________ I'm on the Instagram- @Gearhead_Kevin

12-31-2003, 09:44 PM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Tx Firefighter Thanks for the pics. I finally found that bracket last night. HAHA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.