***omg...94 Amp Alt. On Your Trucks*** - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*rage'nrat638* · 01-07-2007, 06:27 PM

[QUOTE=Sport/truck
Rage-n Rat- was yours a CS 130?
s/t[/QUOTE]

i don't remember ---- 84 camaro ---94 amp

the kit from frank is a direct plug in kit.. no extra wiring, no cutting, nothing.

1BadSS · 01-07-2007, 11:28 AM

A 100amp 1wire int reg alt from autozoo or summit is about $100 and a bit less hassle.

Sport/Truck · 01-07-2007, 04:46 PM

Quote:

Originally Posted by 1BadSS

A 100amp 1wire int reg alt from autozoo or summit is about $100 and a bit less hassle.

some good info here:
http://www.madelectrical.com/electri...hreewire.shtml
s/t

msgross · 01-07-2007, 07:11 PM

i'm buying a kit off of hi as soon as I am ready to hook it all up...$25 shipped he said

Sport/Truck · 01-07-2007, 07:13 PM

Can anyone else help with this wiring mystery?
s/t

Sport/Truck · 01-07-2007, 07:15 PM

can you post a link?
thanks
s/t

*rage'nrat638* · 04-03-2007, 08:49 PM

notice This Picture Is Incorrect

ANOTHER MEMBER MADE HIS OWN JUMPER AND WE FOUND OUT THIS IS NOT THE CORRECT JUMPER PATTERN IN THIS PICTURE I CHECKED THE CUSTOM MADE JUMPER PACKAGE FROM FRANK WITH A METER AND BELOW IS THE CORRECT JUMPER PATTERN

#1 the Two Outside Wires Are Supposed To Be Jumpered Together

#2 the Two Inside Wires Are Jumpered Together

*rage'nrat638* · 04-03-2007, 08:55 PM

BY THE WAY I INSTALLED THIS ALT 12-31-2003, 08:53 PM

FOUR YEARS LATER STILL THE BEST IMPROVEMENT I HAVE DONE TO MY TRUCK...... OTHER THAN PAINTING IT

Purduegmc · 04-03-2007, 10:33 PM

On the jumpers in the 4 pin connector, when you jump the red and white wires together, where do the white wire lead from the connector. I have seen the conversion without jumping the two insides and terminating the white wire. I am planning on doing the switch this weekend and wanted to make sure I was doing it correctly.

Draggn66 · 04-03-2007, 11:50 PM

I did this also because of this thread. Excellent Mod

Thanks Mark!

LOW DOUGH · 04-04-2007, 02:03 PM

I am going to have to look into this when I put project Low Dough back together.

Frizzle Fry · 04-04-2007, 02:18 PM

Why jumper the two inside connections?

Frizzle Fry · 04-07-2007, 03:10 PM

Quote:

Originally Posted by Frizzle Fry

Why jumper the two inside connections?

Anyone? I'm running mine with just the two outer wires jumpered. So I'm curious what function the two inners provide?

spdrcr29 · 04-07-2007, 04:12 PM

I'm a little slow....
Somebody post a link to Frank's user profile so I can find out about one of these conversion kits......

msgross · 04-07-2007, 04:33 PM

pickmup

http://67-72chevytrucks.com/vboard/member.php?u=1330

ChevyDude · 04-07-2007, 05:11 PM

Mine is a 140 amp model...and chrome!

*rage'nrat638* · 04-07-2007, 05:19 PM

well i used a meter on the connector jumper supplyed in franks kit and the two inners are connected together.

where they go and what they do i have no clue.

i just wanted to make sure you did not connect them like that picture showed that is not correct..if i could delete it i would.
any more questions please just ask or p.m. me i will be happy to help. your pal mark

71chevylowrider · 04-07-2007, 05:48 PM

This is a great thread! Thank you guys, this is exactly what I need, I was wondering if any of you guys know if I could take my Chrome alternator in to have it rebuilt to put out 140 amps? I hate to replace it with a cast looking one, or have to spend alot more money on a new Chrome one.

*rage'nrat638* · 04-07-2007, 06:51 PM

i am sure you can. check out the yellow pages in your area.
chances are theres a rebuilder in your area. i had one rebuilt before. worked great..

Pyrotechnic · 08-03-2007, 09:20 PM

Is the 84 Camaro alternator a 3 wire setup ?

I have a 77 GMC and it has a 3 wire alternator (1 screw terminal + 2 prong flat plug) so I'm wondering if it will be a direct plug in and bolt up.

01-07-2007, 07:11 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: *omg...94 Amp Alt. On Your Trucks* i'm buying a kit off of hi as soon as I am ready to hook it all up...$25 shipped he said

01-07-2007, 07:13 PM	#5
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: *omg...94 Amp Alt. On Your Trucks* Can anyone else help with this wiring mystery? s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

01-07-2007, 07:15 PM	#6
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: *omg...94 Amp Alt. On Your Trucks* can you post a link? thanks s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

04-03-2007, 08:49 PM	#7
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: *omg...94 Amp Alt. On Your Trucks* notice This Picture Is Incorrect ANOTHER MEMBER MADE HIS OWN JUMPER AND WE FOUND OUT THIS IS NOT THE CORRECT JUMPER PATTERN IN THIS PICTURE I CHECKED THE CUSTOM MADE JUMPER PACKAGE FROM FRANK WITH A METER AND BELOW IS THE CORRECT JUMPER PATTERN #1 the Two Outside Wires Are Supposed To Be Jumpered Together #2 the Two Inside Wires Are Jumpered Together Last edited by rage'nrat638; 07-12-2007 at 06:54 AM.

04-03-2007, 08:55 PM	#8
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: *omg...94 Amp Alt. On Your Trucks* BY THE WAY I INSTALLED THIS ALT 12-31-2003, 08:53 PM FOUR YEARS LATER STILL THE BEST IMPROVEMENT I HAVE DONE TO MY TRUCK...... OTHER THAN PAINTING IT

01-07-2007, 06:27 PM	#1
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: *omg...94 Amp Alt. On Your Trucks* [QUOTE=Sport/truck Rage-n Rat- was yours a CS 130? s/t[/QUOTE] i don't remember ---- 84 camaro ---94 amp the kit from frank is a direct plug in kit.. no extra wiring, no cutting, nothing.

01-07-2007, 11:28 AM	#2
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: *omg...94 Amp Alt. On Your Trucks* A 100amp 1wire int reg alt from autozoo or summit is about $100 and a bit less hassle. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

04-03-2007, 10:33 PM	#9
Purduegmc Registered User Join Date: Dec 2006 Location: Indiana Posts: 58	Re: *omg...94 Amp Alt. On Your Trucks* On the jumpers in the 4 pin connector, when you jump the red and white wires together, where do the white wire lead from the connector. I have seen the conversion without jumping the two insides and terminating the white wire. I am planning on doing the switch this weekend and wanted to make sure I was doing it correctly. __________________ 70 GMC 1500 2wd lwb 00 Chevy 2500

04-03-2007, 11:50 PM	#10
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: *omg...94 Amp Alt. On Your Trucks* I did this also because of this thread. Excellent Mod Thanks Mark! __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG Last edited by Draggn66; 04-03-2007 at 11:51 PM.

04-04-2007, 02:03 PM	#11
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: *omg...94 Amp Alt. On Your Trucks* I am going to have to look into this when I put project Low Dough back together.

04-04-2007, 02:18 PM	#12
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: *omg...94 Amp Alt. On Your Trucks* Why jumper the two inside connections?

04-07-2007, 04:12 PM	#14
spdrcr29 Registered User Join Date: Jan 2007 Location: Jackson, MI Posts: 78	Re: *omg...94 Amp Alt. On Your Trucks* I'm a little slow.... Somebody post a link to Frank's user profile so I can find out about one of these conversion kits......

04-07-2007, 04:33 PM	#15
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: *omg...94 Amp Alt. On Your Trucks* pickmup http://67-72chevytrucks.com/vboard/member.php?u=1330 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-07-2007, 05:11 PM	#16
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: *omg...94 Amp Alt. On Your Trucks* Mine is a 140 amp model...and chrome! __________________ Alex 1971 Lil' Red 350 SBC 700R4

04-07-2007, 05:19 PM	#17
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: *omg...94 Amp Alt. On Your Trucks* well i used a meter on the connector jumper supplyed in franks kit and the two inners are connected together. where they go and what they do i have no clue. i just wanted to make sure you did not connect them like that picture showed that is not correct..if i could delete it i would. any more questions please just ask or p.m. me i will be happy to help. your pal mark



Register or Log In To remove these advertisements.

04-07-2007, 05:48 PM	#18
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: *omg...94 Amp Alt. On Your Trucks* This is a great thread! Thank you guys, this is exactly what I need, I was wondering if any of you guys know if I could take my Chrome alternator in to have it rebuilt to put out 140 amps? I hate to replace it with a cast looking one, or have to spend alot more money on a new Chrome one.

04-07-2007, 06:51 PM	#19
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: *omg...94 Amp Alt. On Your Trucks* i am sure you can. check out the yellow pages in your area. chances are theres a rebuilder in your area. i had one rebuilt before. worked great..

08-03-2007, 09:20 PM	#20
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: *omg...94 Amp Alt. On Your Trucks* Is the 84 Camaro alternator a 3 wire setup ? I have a 77 GMC and it has a 3 wire alternator (1 screw terminal + 2 prong flat plug) so I'm wondering if it will be a direct plug in and bolt up.

Register or Log In To remove these advertisements.