Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-02-2014, 03:10 PM | #1 |
Registered User
Join Date: Aug 2013
Location: Albany, NY
Posts: 145
|
Finally Got The Rally's Installed
So it looks like the threat of snow is finally gone in the northeast so I finished blasting the 15 x 8 rims and got them painted up and put 255/70's on them. The only issue I had was putting the center caps on the front. The screws they gave me were a little too long and bottomed out on the drums. A grinder took care of that issue.
Here's Olive before... Here are a couple of shots with the new wheels. I like the rims and all but I'm a little disappointed how they fill the wheel wells. I was expecting them to fill it in more. In fact it looks like the rear is jacked up more for some reason. I wasn't planning on lowering the truck but now I'm not sure. It's a leaf rear so my options are limited unless I want to pay $400(ouch!) for a set of lowering leafs. I don't like the idea of doing the flip so I will skip that option. I am planning on switching the front to disk so I could do the drop then. For now I think I'll get the shackle kit first and see how that looks. This is a truck I saw a while ago that I am hoping to get the stance of. Jim
__________________
Thanks, Jim - 69 Short Step CST 350 AC/PB/PS - 69 Short Step 307 Man Column/PS |
04-02-2014, 03:54 PM | #2 |
Registered User
Join Date: Feb 2013
Location: Northwest NJ
Posts: 684
|
Re: Finally Got The Rally's Installed
Your stepper looks GREAT with the rallys & those tires.....can't beat that combo in my opinion !
|
04-02-2014, 04:03 PM | #3 |
Registered User
Join Date: Mar 2014
Location: Easley SC
Posts: 150
|
Re: Finally Got The Rally's Installed
Looks great!!
|
04-02-2014, 04:32 PM | #4 |
Registered User
Join Date: Feb 2012
Location: Smyrna TN
Posts: 1,153
|
Re: Finally Got The Rally's Installed
Looks great! Nice truck.
Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by kcsa75; 04-02-2014 at 11:08 PM. |
04-02-2014, 04:40 PM | #5 |
Senior Member
Join Date: Nov 2001
Location: Rapid City, SD
Posts: 2,281
|
Re: Finally Got The Rally's Installed
Jim,
I am guessing here, but... That look your going for in the last truck picture is a coil spring truck with, and I guessing here... a 2.5' front & 4"-5' rear drop. That is exactly the height and rims I choose as step #1 on all my truck after I get them on the road.
__________________
My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White |
04-02-2014, 07:02 PM | #6 |
Registered User
Join Date: Mar 2010
Location: Shepherdsville, KY
Posts: 6
|
Re: Finally Got The Rally's Installed
The rallys look great! It would look good lowered down a bit
|
04-02-2014, 08:38 PM | #7 |
Senior Member
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
|
Re: Finally Got The Rally's Installed
15x8 rallys, 275 60r15 all around, 2.5/ 4" drop springs
|
04-02-2014, 08:41 PM | #8 |
Senior Member
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
|
Re: Finally Got The Rally's Installed
However, i recently swapped the same tires from the rallys to 15x8 wheel vintique steelies. Same trim rings, 66/67 poverty caps. Sold the rally centers but still have the rallys (for sale, btw)
|
04-02-2014, 08:52 PM | #9 |
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,770
|
Re: Finally Got The Rally's Installed
Wheels look great! That's a darn nice looking truck.
|
04-02-2014, 11:21 PM | #10 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Finally Got The Rally's Installed
I think it looks good, You will get used to it..Your just looking at it too hard
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
04-02-2014, 11:28 PM | #11 |
Senior Member
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
|
Re: Finally Got The Rally's Installed
I agree. Your truck is looking good
__________________
A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
04-03-2014, 11:17 AM | #12 |
Registered User
Join Date: Aug 2013
Location: Albany, NY
Posts: 145
|
Re: Finally Got The Rally's Installed
Thanks for all of the nice comments.
Wideside - Thanks for the pics. I wish my paint was as good as yours looks. Mine is definitely a 20ft paint job. I have some panel replacements too that need to be done. But rust protection of what is in great shape first. Kelsfine69 - I was thinking the same thing. I will drive it for a bit like it is and see if it grows on me. I will probably get the shackle lowering which would give me 1-1.5" inch of drop to level things out. Then if I do lower front I can just get the 3" drop leafs to go with a 2.5" drop spindles. I will say this though, what a change in handling over the stock rims and skinny tires. The old set will be my winter beaters.
__________________
Thanks, Jim - 69 Short Step CST 350 AC/PB/PS - 69 Short Step 307 Man Column/PS |
04-03-2014, 07:48 PM | #13 |
Registered User
Join Date: Jan 2014
Location: Billings Montana
Posts: 183
|
Re: Finally Got The Rally's Installed
I think it looks great.
|
04-03-2014, 07:58 PM | #14 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
|
Re: Finally Got The Rally's Installed
Beautiful truck and would look killer lowered some. Easy 1 1/2" drop with longer shackles BTW>
Why are you against the flip? For $100 and some shocks you can lower the rear 5" without changing the stock ride. Easy to put back with a bolt on kit, that's what I have planned for mine. I have stock wheels on mine (actually the stock rims from my Jimmy with the truck hub caps) and 265 75 15 which fill the wheel well nicely. Future plans include 5 lug disc conversion with 2 1/2" drop spindles and 2" springs. Flip kit in the rear with 5 lug housing. I have the shackles if that's not low enough. 17x8 front with 235 55 17 and 275 55 17 rears.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
04-03-2014, 08:36 PM | #15 |
Registered User
Join Date: May 2011
Location: Oakley, Michigan
Posts: 735
|
Re: Finally Got The Rally's Installed
I love it!!!
|
Bookmarks |
|
|