Looking for a No Spin Sticker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 04-10-2014, 09:14 AM

Quote:

Originally Posted by special-K

I have an unused one. They didn't come installed,but were in the glovebox packet. I'm not sure mine is the correct model#,it's been a while since I've had it in my hand. But,I considered having these made by my sign shop buddy. The problem is the model#. A K/10 with require a different sticker from a K/20. I would have the K/20s done because that's the factory device they came with.

Hi Tim,

It wouldn't be that hard to change the 10 to a 20 on these. It would just take a little time. Thanks for your input.

LockDoc

**DeadheadNM** · 04-10-2014, 09:51 AM

Quote:

Originally Posted by LockDoc

Hi Tim,

It wouldn't be that hard to change the 10 to a 20 on these. It would just take a little time. Thanks for your input.

LockDoc

I believe the model # KS-10 as shown is correct for 3/4t trucks with an H052(72) axle...

**LockDoc** · 04-10-2014, 03:12 PM

Quote:

Originally Posted by DeadheadNM

I believe the model # KS-10 as shown is correct for 3/4t trucks with an H052(72) axle...

Thanks that's good to know.

LockDoc

**Elliot949** · 04-10-2014, 05:15 PM

Quote:

Originally Posted by DeadheadNM

I believe the model # KS-10 as shown is correct for 3/4t trucks with an H052(72) axle...

that is correct... It does apply the same in the "C" series as well as the "K" series...

The Sticker I displayed at the beginning of this thread is from my 67 C/20 Camper Special With the 4G86CA No Spin Axle...

**TBONE1964** · 04-10-2014, 08:22 PM

Also,

Check with board member Tc71. His name is Terry. He did some work for me on my business logo and some other label work and did an excellent job. I would highly recommend him to any of you who want a high quality decal/stickers made up. Give him a chance to take care of you. You will not be disappointed.

If you need more information, let me know.

Take care,
Tom

04-10-2014, 08:22 PM	#5
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Looking for a No Spin Sticker Also, Check with board member Tc71. His name is Terry. He did some work for me on my business logo and some other label work and did an excellent job. I would highly recommend him to any of you who want a high quality decal/stickers made up. Give him a chance to take care of you. You will not be disappointed. If you need more information, let me know. Take care, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.