Does anyone have an original 327 engine in their 1967? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jmader** · 04-07-2014, 10:48 AM

I'm having trouble figuring out what casting numbers I need for my rebuild. I'm looking for the intake, exhaust (4x4), and water pump castings. Mine is a GMC but I'm thinking the engines would be the same as a Chevy? Any info would be greatly appreciated!

**jmader** · 04-08-2014, 11:49 AM

Ttt

dmartin1 · 04-08-2014, 01:14 PM

i have a 327 in a 67 1-owner c20 i bought.had the rochester small square bore carb.

i can get numbers off whatever youd need if my stuff would be correct (2wd)

**jmader** · 04-08-2014, 01:25 PM

The exhaust manifolds would be different but the intake and water pump should be the same I think. Yes if you could get those numbers that would be awesome!

19Chevy67C10 · 04-08-2014, 08:16 PM

I have an orginial 67, 327 at our shop right now, it has ram horn exaust manifolds. I can get you parts number if needed..let me know..

Kev..

**jmader** · 04-08-2014, 08:39 PM

Quote:

Originally Posted by 19Chevy67C10

I have an orginial 67, 327 at our shop right now, it has ram horn exaust manifolds. I can get you parts number if needed..let me know..

Kev..

Yes please. Any info would be great!

oldno7 · 04-08-2014, 08:42 PM

19chevy67c10, could u put up a pic of those exhaust manifolds

**jmader** · 04-10-2014, 11:44 AM

Ttt

dmartin1 · 04-10-2014, 03:41 PM

jmader, i replied in the other thread you have on original 67 327. posting here incase you dont see it.

tlcrz1972 · 04-10-2014, 07:43 PM

Jeremy,

The exhaust manifolds that came off the engine I sent you are;

3747042
RH 43

3846559A
LH20

These came off the 1967 3/4 4X4 chevrolet truck with only 58,000 miles on it. I reasonably confident that it was unmolested and changed considering all the factory tabs were peened over nicely and didn't look as if they had been removed.

Hope this helps

Later Brian

**jmader** · 04-10-2014, 08:40 PM

Hey Brian. Yeah I think you're right. Those were the manifold that were on my truck also. The engine was changed at some point but I think the exhaust was original. At first I didn't think so because when I looked up the numbers they kept coming up as corvette manifolds but I did find one place that said they were used on trucks. They have the smaller 2" opening which wouldn't be correct for a vette. I was pretty confident they were right and you are helping me confirm this. Thanks for you input!

04-07-2014, 10:48 AM	#1
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Does anyone have an original 327 engine in their 1967? I'm having trouble figuring out what casting numbers I need for my rebuild. I'm looking for the intake, exhaust (4x4), and water pump castings. Mine is a GMC but I'm thinking the engines would be the same as a Chevy? Any info would be greatly appreciated! __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

04-08-2014, 11:49 AM	#2
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Does anyone have an original 327 engine in their 1967? Ttt __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

04-08-2014, 01:14 PM	#3
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: Does anyone have an original 327 engine in their 1967? i have a 327 in a 67 1-owner c20 i bought.had the rochester small square bore carb. i can get numbers off whatever youd need if my stuff would be correct (2wd) __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

04-08-2014, 01:25 PM	#4
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Does anyone have an original 327 engine in their 1967? The exhaust manifolds would be different but the intake and water pump should be the same I think. Yes if you could get those numbers that would be awesome! __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

04-08-2014, 08:16 PM	#5
19Chevy67C10 Registered User Join Date: Sep 2011 Location: At the end of the road! Posts: 282	Re: Does anyone have an original 327 engine in their 1967? I have an orginial 67, 327 at our shop right now, it has ram horn exaust manifolds. I can get you parts number if needed..let me know.. Kev.. __________________ Kev's-C-10

04-08-2014, 08:42 PM	#7
oldno7 Registered User Join Date: Jan 2007 Location: Ill. Posts: 584	Re: Does anyone have an original 327 engine in their 1967? 19chevy67c10, could u put up a pic of those exhaust manifolds __________________ Hi everyone, It's nice to know there's other people just as crazy about these old trucks as I am. oldno7

04-10-2014, 11:44 AM	#8
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Does anyone have an original 327 engine in their 1967? Ttt __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

04-10-2014, 03:41 PM	#9
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: Does anyone have an original 327 engine in their 1967? jmader, i replied in the other thread you have on original 67 327. posting here incase you dont see it. __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

04-10-2014, 07:43 PM	#10
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: Does anyone have an original 327 engine in their 1967? Jeremy, The exhaust manifolds that came off the engine I sent you are; 3747042 RH 43 3846559A LH20 These came off the 1967 3/4 4X4 chevrolet truck with only 58,000 miles on it. I reasonably confident that it was unmolested and changed considering all the factory tabs were peened over nicely and didn't look as if they had been removed. Hope this helps Later Brian __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

04-10-2014, 08:40 PM	#11
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Does anyone have an original 327 engine in their 1967? Hey Brian. Yeah I think you're right. Those were the manifold that were on my truck also. The engine was changed at some point but I think the exhaust was original. At first I didn't think so because when I looked up the numbers they kept coming up as corvette manifolds but I did find one place that said they were used on trucks. They have the smaller 2" opening which wouldn't be correct for a vette. I was pretty confident they were right and you are helping me confirm this. Thanks for you input! __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.