|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-10-2014, 06:59 PM
|
#1 |
|
Registered User
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
|
Weather strip track on inside A pillar 51 AD
Been working on the cab on my 51. I have to weld in new inside kick panels and floor boards on both sides. Are you all installing new weather stripping that slides in the track that surrounds the door on the inside of the cab? Is it needed or what are you all doing when you are replacing the inner kick panel and such? I have a custom firewall and floor. I'm not after factory correct. I've seen builds such as NSane's and it looks to be cut out.
Cheers!
__________________
1952 Canadian Chevy 1300 C4 IFS & D44 IRS 5.3 HO L33 My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938 
|
|
|
|
04-10-2014, 07:39 PM
|
#2 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,134
|
Re: Weather strip track on inside A pillar 51 AD
It keeps the outside noise and wind out of the cab. As you know there are vents in the cowl sides and air goes into them and into the hinge pockets. This helps keep the air flow from the hinge pockets from going into the cab.
|
|
|
|
|
04-10-2014, 09:15 PM
|
#3 |
|
Registered User
Join Date: Jun 2011
Location: Floyds Knobs, IN
Posts: 430
|
Re: Weather strip track on inside A pillar 51 AD
One of the vendors sell the lower section of track for the windlass so as to not ave to replace around the complete door.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
