I need some Bucket Seat Indentification Info.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bamm · 01-01-2004, 10:26 PM

Can anyone tell me what year these seats are?? I think the covers are '70-'72, but are the seat brackets right for that or are they a different year???? Any help will be appreciated.... Thanks, ........Jerry

Bamm · 01-01-2004, 10:27 PM

Here is the drivers seat bottom........

Bamm · 01-01-2004, 10:29 PM

Here is the passenger seat bottom.......

Bamm · 01-01-2004, 10:30 PM

Here is another pic of the buckets.......Jerry

1970blazin · 01-01-2004, 10:32 PM

That passenger seat is NOT the right brackets for a 69-72 blazer. The passenger brackets are set up so that the passenger seat can rock forward and get rear seat access for the back passengers. I will see if I have a pic of my brackets.

da-burb · 01-01-2004, 10:35 PM

Those are correct for PICKUPS, not blazers.

Bamm · 01-01-2004, 10:37 PM

You're right, I didn't think they were blazer seats. I bought them about two years ago and bought these covers new, still in the box from a friend and had them put on. I just want to know exactly what they are. Thanks, anybody else know?????..........Jerry

Bamm · 01-01-2004, 10:38 PM

Are there any differences in the 70, 71, and 72 seats???......Thanks ......Jerry

1970blazin · 01-01-2004, 10:40 PM

I think that the 70 seats had the scroll patterns and the 71 and up didn't, but that is just the seat cover- so who knows if your seat covers are original.
Diane

da-burb · 01-01-2004, 10:49 PM

As far as the year of the covers, I believe them to be 71-2 covers because of the 2 scoll patterns. The 69-70's had a single scroll down the middle of the seat from what I remember.

Bamm · 01-01-2004, 10:50 PM

I know they aren't original covers. So was '70 the only year for the scroll/work seats? Do the frames and brackets fit the '70 year??? ..............Jerry

**CPNE** · 01-01-2004, 11:08 PM

69-70 had single scroll, 71/72 had 2 scrolls as your seats have. Brackets are the same 69-72. These brackets will also work in 67/68 cabs too. You will need to drill holes for the brackets if you plan to replace the stock bench, regardless of year. This is not because the brackets are wrong, they simply used a different bolt spacing pattern.

I hope this answers your question.

Nice seats!. Nothing beats stock buckets IMO.

Hooter · 01-02-2004, 02:41 AM

ya definetly truck seats, my brackets for the buckets out of the 69 look exactly the same

1970blazin · 01-02-2004, 03:10 PM

Sorry about my stupid answer- I have blazer on the brain and thought you were asking if those were blazer seat bracket.?/

Duh! Also I was wrong about the scroll...CPNE DEFINATELY knows better than I do. Those covers are for a 71 or 72 model. Again sorry for the quick wrong answers!

Diane

**CPNE** · 01-02-2004, 03:16 PM

Quote:

Originally posted by 1970blazin
Sorry about my stupid answer- I have blazer on the brain and thought you were asking if those were blazer seat bracket.?/ Duh! Also I was wrong about the scroll...CPNE DEFINATELY knows better than I do. Those covers are for a 71 or 72 model. Again sorry for the quick wrong answers!
Diane

From the looks of your Blazer I'd say you have nothing to apologize for. Awsome resto project!

FYI, it's not what you know but how much conviction you say it with! That's how politicians get elected!

*Tanker350* · 01-02-2004, 07:58 PM

these are it

*Tanker350* · 01-02-2004, 07:59 PM

#2

*Tanker350* · 01-02-2004, 08:02 PM

#3

da-burb · 01-02-2004, 09:28 PM

Those utility buckets look pretty nice in that truck.

*Tanker350* · 01-02-2004, 10:27 PM

Thank-you, I got a Awesome deal on them too. $100.00 including the brackets and there was no shipping

01-01-2004, 10:26 PM	#1
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I need some Bucket Seat Indentification Info.... Can anyone tell me what year these seats are?? I think the covers are '70-'72, but are the seat brackets right for that or are they a different year???? Any help will be appreciated.... Thanks, ........Jerry Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 10:30 PM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Here is another pic of the buckets.......Jerry Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 10:32 PM	#5
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	That passenger seat is NOT the right brackets for a 69-72 blazer. The passenger brackets are set up so that the passenger seat can rock forward and get rear seat access for the back passengers. I will see if I have a pic of my brackets. __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

01-01-2004, 10:35 PM	#6
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Those are correct for PICKUPS, not blazers. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-01-2004, 10:37 PM	#7
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	You're right, I didn't think they were blazer seats. I bought them about two years ago and bought these covers new, still in the box from a friend and had them put on. I just want to know exactly what they are. Thanks, anybody else know?????..........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 10:27 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Here is the drivers seat bottom........ Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 10:29 PM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Here is the passenger seat bottom....... Attached Images __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 10:38 PM	#8
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Are there any differences in the 70, 71, and 72 seats???......Thanks ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 10:40 PM	#9
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	I think that the 70 seats had the scroll patterns and the 71 and up didn't, but that is just the seat cover- so who knows if your seat covers are original. Diane __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

01-01-2004, 10:49 PM	#10
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	As far as the year of the covers, I believe them to be 71-2 covers because of the 2 scoll patterns. The 69-70's had a single scroll down the middle of the seat from what I remember. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-01-2004, 10:50 PM	#11
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I know they aren't original covers. So was '70 the only year for the scroll/work seats? Do the frames and brackets fit the '70 year??? ..............Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-01-2004, 11:08 PM	#12
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	69-70 had single scroll, 71/72 had 2 scrolls as your seats have. Brackets are the same 69-72. These brackets will also work in 67/68 cabs too. You will need to drill holes for the brackets if you plan to replace the stock bench, regardless of year. This is not because the brackets are wrong, they simply used a different bolt spacing pattern. I hope this answers your question. Nice seats!. Nothing beats stock buckets IMO. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-02-2004, 02:41 AM	#13
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	ya definetly truck seats, my brackets for the buckets out of the 69 look exactly the same __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-02-2004, 03:10 PM	#14
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Sorry about my stupid answer- I have blazer on the brain and thought you were asking if those were blazer seat bracket.?/ Duh! Also I was wrong about the scroll...CPNE DEFINATELY knows better than I do. Those covers are for a 71 or 72 model. Again sorry for the quick wrong answers! Diane __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

01-02-2004, 07:58 PM	#16
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	these are it Attached Images



Register or Log In To remove these advertisements.

01-02-2004, 07:59 PM	#17
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	#2 Attached Images

01-02-2004, 08:02 PM	#18
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	#3 Attached Images

01-02-2004, 09:28 PM	#19
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Those utility buckets look pretty nice in that truck. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-02-2004, 10:27 PM	#20
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	Thank-you, I got a Awesome deal on them too. $100.00 including the brackets and there was no shipping

Register or Log In To remove these advertisements.