Passenger Side Lower Door Piller Front

[Larry64]

1964 short step. I have cut out the front cab support & the front lower piller almost to the lower door hinge because of rust thru, also a lot of the floor. I didn't take any measurements & am now in a bind. Can anyone tell me the measurement from the lowest door hinge hole to the top hole in the door piller, or a way out of this mess?
Thanks Larry

[Larry64]

Anyone. First time I have seen a question unanswered.
Thanks Larry

[mark 66]

not sure I understand the question. in your first post you said you removed pillar below lower hinge. do you need the measurement from the lower bolt hole of lower hinge to bottom of pillar?

[evan396]

larry, is this what your looking for, if it is let me know and my dad can take a better measurement. evan396

[Larry64]

even396 That is perfect. Thank you very much.
Larry

[Woogeroo]

Larry64,

It was a holiday weekend where folks meet up with family... it happens several times a year. People can only reply to a post if they actually see it.

Take care,

-W

[Larry64]

Woogeroo thanks for reminding me. I'm retired so every day is a holiday. evan396 did a great job with the pictures I needed.
Larry

[hemifalcon]

Just measure from the other side unless you've cut that as well.. Or--hang the door on the top hinge point and measure down from there for the new A-Pillar bottom.. Next time--measure before cutting..