ash tray help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**truckdude239** · 04-12-2014, 09:22 PM

I swaped my cab on my 71 and i hsve the ash tray out of my 71 gmc parts truck but it doesnt fit my new cab i think the new cab is a 70 model has it had the rod style pedal linkage anyideas? Are they all different

**LockDoc** · 04-12-2014, 10:01 PM

-
I think there are at least 3 different ones. The '67's are all by themselves because the front panel is thinner. Then there is one with a the thicker front panel that has ball bearing slides and one with a thicker front panel without ball bearing slides. Someone correct me if I'm wrong here....

LockDoc

**WIDESIDE72** · 04-12-2014, 11:18 PM

Quote:

Originally Posted by LockDoc

-
I think there are at least 3 different ones. The '67's are all by themselves because the front panel is thinner. Then there is one with a the thicker front panel that has ball bearing slides and one with a thicker front panel without ball bearing slides. Someone correct me if I'm wrong here....

LockDoc

That is what i was thinking as well.

**'68OrangeSunshine** · 04-13-2014, 12:11 AM

The ball-bearing one was called the "Deluxe Ash Tray."
No kidding.

**michael bustamante** · 04-13-2014, 12:22 AM

Im thinking 71- 72 had the plastic guides rather than ball bearings. And yup 67 is all by itself

magwakeenercew2jh · 04-13-2014, 01:46 AM

Quote:

Originally Posted by truckdude239

I swaped my cab on my 71 and i hsve the ash tray out of my 71 gmc parts truck but it doesnt fit my new cab i think the new cab is a 70 model has it had the rod style pedal linkage anyideas? Are they all different

I think I have a couple of ash trays. If you know what you need, I'll check out the stash. If I have the one you need, it's yours.

**truckdude239** · 04-13-2014, 08:03 AM

Ill take a picture today of what i have

**LockDoc** · 04-13-2014, 11:13 AM

Quote:

Originally Posted by magwakeenercew2jh

I think I have a couple of ash trays. If you know what you need, I'll check out the stash. If I have the one you need, it's yours.

Nice gesture. That's what makes this board so great....

LockDoc

magwakeenercew2jh · 04-14-2014, 12:59 PM

Pulled out the trays and brackets this morning. Nice day here.....So it was a two cup garage-puttering morning, anyway.

I found two ball-bearing ashtrays and one of each 1) ball bearing bracket and 1) slotted bracket.

I don't know about there being three different ones, but, as I said, I've got two ball bearing trays that will clean up nicely,
one ball bearing bracket, and one "slotted" bracket with no accompanying tray.

I don't need 'em.

Here are some pics. Brackets are turned upside-down for the pics.

**truckdude239** · 04-14-2014, 01:08 PM

Ill take one ball bearing with brakect pm me your price and shipping ill paypal u the costs

magwakeenercew2jh · 04-14-2014, 01:13 PM

Quote:

Originally Posted by truckdude239

Ill take one ball bearing with brakect pm me your price and shipping ill paypal u the costs

Hahahaha!!!!!

I know you must be familiar with the drill.

No price.

Thankfully, for a bunch of us that will likely die poor in some ways,
but happy in other ways, it's not about money.

Send me your address. It's yours.

Send someone else something from your stash when they need it.

**truckdude239** · 04-14-2014, 01:31 PM

Heres what i got THE ASH TRAY IS OUT OF A 71 GMC my cab was listed as a 71 cab when i bought it but i know its not because of the rod style gas pedal linkage it had

**truckdude239** · 04-14-2014, 01:38 PM

my tray looks just like the left side one with ball bearings pm sent

magwakeenercew2jh · 04-14-2014, 01:39 PM

Quote:

Originally Posted by truckdude239

Heres what i got

truckdude:

I lubed it up with just a spot of grease and it works very nicely.
No dents . But of course you'll wanna clean her up and paint the face.... I'm sending the tray and the bracket, just in case.

As soon as I get your address either PM'd to me or just send it to keener@sti.net...(I'm not much on "privacy"), I'll shoot it to you.

Have fun.

magwakeenercew2jh · 04-21-2014, 10:25 PM

Should be there by now. If not, let me know so I can check it out from this end.

**truckdude239** · 04-21-2014, 10:26 PM

Yes sir i got it kast week thought i posted here look great thanks alot!!!

magwakeenercew2jh · 04-21-2014, 10:53 PM

Quote:

Originally Posted by truckdude239

Yes sir i got it kast week thought i posted here look great thanks alot!!!

Okay. Perfect. Enjoy.

04-12-2014, 09:22 PM	#1
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	ash tray help I swaped my cab on my 71 and i hsve the ash tray out of my 71 gmc parts truck but it doesnt fit my new cab i think the new cab is a 70 model has it had the rod style pedal linkage anyideas? Are they all different __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-12-2014, 10:01 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,473	Re: ash tray help - I think there are at least 3 different ones. The '67's are all by themselves because the front panel is thinner. Then there is one with a the thicker front panel that has ball bearing slides and one with a thicker front panel without ball bearing slides. Someone correct me if I'm wrong here.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-13-2014, 12:11 AM	#4
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,250	Re: ash tray help The ball-bearing one was called the "Deluxe Ash Tray." No kidding. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

04-13-2014, 12:22 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: ash tray help Im thinking 71- 72 had the plastic guides rather than ball bearings. And yup 67 is all by itself __________________ 1967custom

04-13-2014, 08:03 AM	#7
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	Re: ash tray help Ill take a picture today of what i have __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-14-2014, 12:59 PM	#9
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: ash tray help Pulled out the trays and brackets this morning. Nice day here.....So it was a two cup garage-puttering morning, anyway. I found two ball-bearing ashtrays and one of each 1) ball bearing bracket and 1) slotted bracket. I don't know about there being three different ones, but, as I said, I've got two ball bearing trays that will clean up nicely, one ball bearing bracket, and one "slotted" bracket with no accompanying tray. I don't need 'em. Here are some pics. Brackets are turned upside-down for the pics. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

04-14-2014, 01:08 PM	#10
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	Re: ash tray help Ill take one ball bearing with brakect pm me your price and shipping ill paypal u the costs __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-14-2014, 01:31 PM	#12
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	Re: ash tray help Heres what i got THE ASH TRAY IS OUT OF A 71 GMC my cab was listed as a 71 cab when i bought it but i know its not because of the rod style gas pedal linkage it had Attached Images __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 04-14-2014 at 01:38 PM.

04-14-2014, 01:38 PM	#13
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	Re: ash tray help my tray looks just like the left side one with ball bearings pm sent __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-21-2014, 10:25 PM	#15
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: ash tray help Should be there by now. If not, let me know so I can check it out from this end. __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

04-21-2014, 10:26 PM	#16
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	Re: ash tray help Yes sir i got it kast week thought i posted here look great thanks alot!!! __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.