Upper A arm bushings for 72 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

desertdogg · 04-19-2014, 12:54 AM

Im installing my suspension and have noticed my upper a arm bushings are shot I have called around for these and they all say needs to be special ordered. Does anyone know if other bushings will work ? like from a chevelle or anything ? thanks trying to get this done by tomorrow and any help would be apreciated.

crossfire84 · 04-19-2014, 08:31 AM

...

SCOTI · 04-19-2014, 11:25 AM

Quote:

Originally Posted by desertdogg

Im installing my suspension and have noticed my upper a arm bushings are shot I have called around for these and they all say needs to be special ordered. Does anyone know if other bushings will work ? like from a chevelle or anything ? thanks trying to get this done by tomorrow and any help would be apreciated.

No car bushings work for the 6x-72 a-arms.

kerber63 · 04-19-2014, 11:44 AM

If your local parts places carry Moog, ask for part K6098. That's the whole upper cross shaft with bushings and grommets. If you don't want the whole shaft assembly (probably $40-$60 at a parts store, $25 from rockauto), truckancarshop.com sells just the steel bushings.

michael bustamante · 04-19-2014, 12:27 PM

Rockauto has good deals on them

desertdogg · 04-19-2014, 12:42 PM

thanks for the info guys !!

mcm1209 · 04-23-2014, 02:20 PM

What did you end up going with?

desertdogg · 04-23-2014, 08:37 PM

Quote:

Originally Posted by mcm1209

What did you end up going with?

I ended up gettine a complete front end rebuild kit just another bump on the road but it needed it, at least it will be a nice and tight front end when its done

Malamute · 04-23-2014, 09:04 PM

Quote:

Originally Posted by desertdogg

I ended up gettine a complete front end rebuild kit just another bump on the road but it needed it, at least it will be a nice and tight front end when its done

Where did you end up getting it? I was going to go with PB arms when I do my static drop but I want to do this on the cheap for now. I can always swap arms out down the road if I feel like it. I haven't looked closely at my bushings but I can guarantee that they will need to be replaced.

desertdogg · 04-24-2014, 12:35 AM

Quote:

Originally Posted by Malamute

Where did you end up getting it? I was going to go with PB arms when I do my static drop but I want to do this on the cheap for now. I can always swap arms out down the road if I feel like it. I haven't looked closely at my bushings but I can guarantee that they will need to be replaced.

a resto parts .com its a pretty complete kit and comes with the idler arm and all the bushings and sleeves here is a link

http://stores.a-resto-parts.com/1971...ith-idler-arm/

desertdogg · 04-24-2014, 12:47 AM

Quote:

Originally Posted by Malamute

. I haven't looked closely at my bushings but I can guarantee that they will need to be replaced.

I was going to replace the arms but it started to really add up and Im right in the middle of an LS swap to boot. If you have never done your front end I gaurantee you they are bad unless a previous owner did them. Mine were so bad that there was probably an inch of slop side to side on both sides upper and lowers. I figured since got it apart might as well just replace it all, alignment shops wont even look at it if its got too much play.

kerber63 · 04-24-2014, 03:23 AM

Quote:

Originally Posted by desertdogg

a resto parts .com its a pretty complete kit and comes with the idler arm and all the bushings and sleeves here is a link

http://stores.a-resto-parts.com/1971...ith-idler-arm/

What brand of parts were in the kit?

desertdogg · 04-25-2014, 12:17 AM

Quote:

Originally Posted by kerber63

What brand of parts were in the kit?

How can you tell ?....I have no Idea

**Clyde65** · 04-25-2014, 08:18 AM

I used this, but when I got it, there was a lot more to the kit. ALso everything was MOOG and in original boxes.

http://www.classicperform.com/Store/.../6062SFKPT.htm

04-19-2014, 12:54 AM	#1
desertdogg Registered User Join Date: Jan 2012 Location: San Diego, Ca Posts: 249	Upper A arm bushings for 72 c10 Im installing my suspension and have noticed my upper a arm bushings are shot I have called around for these and they all say needs to be special ordered. Does anyone know if other bushings will work ? like from a chevelle or anything ? thanks trying to get this done by tomorrow and any help would be apreciated. __________________ Trying to get thru my LS swap

04-19-2014, 08:31 AM	#2
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: Upper A arm bushings for 72 c10 ... __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

04-19-2014, 11:44 AM	#4
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 280	Re: Upper A arm bushings for 72 c10 If your local parts places carry Moog, ask for part K6098. That's the whole upper cross shaft with bushings and grommets. If you don't want the whole shaft assembly (probably $40-$60 at a parts store, $25 from rockauto), truckancarshop.com sells just the steel bushings. __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

04-19-2014, 12:27 PM	#5
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Upper A arm bushings for 72 c10 Rockauto has good deals on them __________________ 1967custom

04-19-2014, 12:42 PM	#6
desertdogg Registered User Join Date: Jan 2012 Location: San Diego, Ca Posts: 249	Re: Upper A arm bushings for 72 c10 thanks for the info guys !! __________________ Trying to get thru my LS swap

04-23-2014, 02:20 PM	#7
mcm1209 Registered User Join Date: Jul 2009 Location: Porter, Texas Posts: 115	Re: Upper A arm bushings for 72 c10 What did you end up going with?

04-25-2014, 08:18 AM	#14
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Upper A arm bushings for 72 c10 I used this, but when I got it, there was a lot more to the kit. ALso everything was MOOG and in original boxes. http://www.classicperform.com/Store/.../6062SFKPT.htm __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.