![]() |
![]() |
#1 |
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Had to share !
![]() ![]() ![]() Forgive me. but I had to share this with the board. Just finished the install of my new (Jeg's) 260 h.p. Crate motor and 200R4 O/D Transmission all new including copper/brass radiator, Skip White HEI, Edelbrock intake and tranny cooler. Did reuse the Holley Street Avenger, flexplate, exhaust system, mini-starter, and Serpentine set-up (Thanks, Tom.) Runs sweet, drives like stink and the O/D is a gas. Loved being able to pace the traffic on the freeway (75-80 m.p.h.) Will finish break-in and switch to Castrol Synthetic. Best thing, sold the take-out 350 /400 to help re-coup some $$$. It ain't as upscale as some, but it's my D/D and I can't wait to put on the road tomorrow!
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee) ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2011
Location: sutton WV
Posts: 1,822
|
Re: Had to share !
Very nice work you've done
![]()
__________________
Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623 |
![]() |
![]() |
![]() |
#3 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,238
|
Re: Had to share !
Looks good Toby. I like black and red combos. That engine should give you a lot of fun and good milege too.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Dec 2013
Location: Norwood, Colorado
Posts: 83
|
Re: Had to share !
Looks great! Nice job!
|
![]() |
![]() |
![]() |
#5 |
Rusty Nuts
Join Date: Sep 2008
Location: Clever Missouri
Posts: 1,338
|
Re: Had to share !
I like it! Looks great.
__________________
(Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414 |
![]() |
![]() |
![]() |
#6 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Had to share !
You took your truck to another level with all the upgrades you just did.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#7 |
Cluster King
![]() Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Re: Had to share !
Looks really nice Robbie and you are going to love having passing power at 75 MPH.
Have fun, Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: Had to share !
Very well done Toby! I really like the serpentine belt system. Looks sharp!
![]() ![]()
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" ![]() "Be American, Buy American" ![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Feb 2013
Location: Spring Hill, Florida
Posts: 465
|
Re: Had to share !
awesome! I am working on my Jegs 350 as well... not as far as you. trying to decide if I want to swap the trans... will stick with my 350 for now... would love to go to a 4 speed od trans but I fear that would be more work then it is worth with a 700r being much easier... but I can dream of a world with a 4 or 5 speed manual in my truck.
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Had to share !
Nice work on that. I'm really liking the serpentine setup, you don't see those on small blocks every day.
HEI requires only one keyed on 12v power (the existing coil resistor wire cannot be used). The wire from the starter can be eliminated altogether.
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Dec 2012
Location: Tacoma WA
Posts: 274
|
Re: Had to share !
Nice work on that. I'm really liking the serpentine setup, you don't see those on small blocks every day. Like one of these
Last edited by Wizo; 04-27-2014 at 11:49 PM. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jun 2010
Location: San Diego Co.
Posts: 1,162
|
Re: Had to share !
Glad you did share! Nice looking motor there. I've thought that if/when the time came, I would go with the same engine/tranny set up.
Let us know how you like driving it. And have fun!
__________________
1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor. ![]() |
![]() |
![]() |
![]() |
#13 | |
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Re: Had to share !
Quote:
I am really going to have to upgrade the 3.08 gear, though. When the tranny drops into O/D at 65 m.p.h., the r.p.m.'s drop so low it sounds like the engine is going to stall !! I have been looking for a 3.73 gear, but they are hard to find around here. I may just change the 3.08 (posi) gearset. Motive Gear makes a 3.73 or even a 4.10 (thick) gear that will fit on the 3.08 carrier. Gotta regroup on the funds, first. According to the nice lady at Bowtie Overdrive, I can drive around town in third gear as long as the tranny temp is o.k. She said she does the same with her driver. I also am going to build-up another dash with a SpeedHut tach in the center. I have gone thru two "Camaro tachs" and both have died. And you're right Tbone. The looks I getting from the rice rockets when I blow by 'em at 85 m.p.h. is "priceless"..... And by the way, does anyone know of anyone who sells a shift indicator (PRN"O"DLL) that will fit on the '70 column? |
|
![]() |
![]() |
![]() |
#14 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
Toby nice job on the motor man digging it!
Buy the speed hut GPS speedometer as well. Then it want matter what gear tire you install on the truck later it will always be right. I love mine. ![]() ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Jan 2014
Location: Stigler,OK
Posts: 125
|
Re: Had to share !
Quote:
|
|
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
|
Re: Had to share !
Looks good.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|