The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-15-2014, 07:38 PM   #1
dzwestwindsor
Registered User
 
Join Date: Apr 2013
Location: Princeton, NJ
Posts: 40
Smile Adjusting for play in steering

I have a 1971 C20 that has a good amount of play in the steering. It's definitely because of the steering gear, since the input shaft going into the box can be rotated by hand without any resistance, and with no output.

Is it safe to adjust the allen screw and nut on the gearbox? I've seen people write that it is dangerous and may lock up while driving, or that it wears out the box even faster. Are these claims true?

If I adjust it a little to remove some of the play and still be able to rotate it from full lock to full lock without any issues, it should be safe, right? It wouldn't just randomly lock up without warning, I hope?

Thanks
dzwestwindsor is offline   Reply With Quote
Old 05-15-2014, 08:25 PM   #2
CaptRMW
Custom Sport W/T
 
CaptRMW's Avatar
 
Join Date: Nov 2010
Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem
Posts: 898
Re: Adjusting for play in steering

I adjust mine about 1/8 turn per year as soon as I notice just a tiny bit of slack and it steers like a new vehicle for about another year with no issues. Find a vacant lot to do the adjusting and test driving. Report your findings and we will all benefit.
CaptRMW is offline   Reply With Quote
Old 05-15-2014, 08:29 PM   #3
Bigdav160
Registered User
 
Bigdav160's Avatar
 
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
Re: Adjusting for play in steering

I've rebuilt at least a hundred steering boxes over the years.

I'm in the camp of "don't mess with the sector screw". It just makes it steering harder without really taking out the slack.
__________________
My Classics:
'72 K20 Suburban + '65 Dodge Town Wagon
'72 Corvette Roadster +'67 Corvette Roadster
'73 Z-28 Camaro
'63 Ford SWB Uni Pickup
'50 Ford Coupe
Bigdav160 is offline   Reply With Quote
Old 05-15-2014, 09:09 PM   #4
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,621
Re: Adjusting for play in steering

In my limited experience, you can adjust that screw to take up slack in a worn box, but....

1) Be careful, go in small increments, too snug and the steering won't return to center without your help.

2) It's just a temporary bandaid to buy a little more time. You need a new steering box.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Old 05-15-2014, 09:14 PM   #5
hugger6933
Registered User
 
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,269
Re: Adjusting for play in steering

Let me preface what I'm about to type in case you don't know me. I have owned a body shop and build late model trucks[wrecks] and have been in the used car business since 1987. If I had a truck /car /golf cart with that much slack in it that the box was in need of tightening that much I would replace it promptly. Of course I don't know how you are stacked for cash if your like me your tapped out but please don't risk yours or your families safety or those driving around you on a box that loose. That screw is mainly to set the preload of the worm gear if I recall and a slight turn will give the effect of making it tighter to turn because it will take more effort to turn it. Jim
hugger6933 is offline   Reply With Quote
Old 05-15-2014, 10:21 PM   #6
brian1971
Registered User
 
brian1971's Avatar
 
Join Date: Sep 2012
Location: fort lauderdale,fl
Posts: 1,296
Re: Adjusting for play in steering

I would replace the steering box or get it rebuilt,If there is that much play don't even bother adjusting that screw.
__________________
1971 c10 custom deluxe fleetside swb
LS3 w/BTR stage IV cam,4L85E w/3600 stall

67-72chevytrucks.com/vboard/showthread.php?t=558024
brian1971 is offline   Reply With Quote
Old 05-16-2014, 08:12 AM   #7
cwilkie
Chance
 
cwilkie's Avatar
 
Join Date: Sep 2001
Location: Belcourt ,ND, USA
Posts: 750
Re: Adjusting for play in steering

I send my gear boxes to Blue Top Steering Gears in Stanton, ND. He rebuilds them for $180 plus shipping. I just sent one to them on Monday and received it back Thursday. I just used a large flat rate priority box. He does really good work.
__________________
1968 Chevrolet Stepside
BB 396 w/TH400

1972 Chevrolet 3/4 Ton 4x4
BB 496 w/TH400

Last edited by cwilkie; 05-16-2014 at 08:13 AM. Reason: Spelling error
cwilkie is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com