Post those wheels gallery - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tom Vogel** · 03-15-2014, 10:23 AM

Quote:

Here are my wheels 15X8 with chrome rallies

Gorgeous Truck!

OregonNed · 03-15-2014, 03:32 PM

Finished installing the right lug nuts and rally caps for my new wheels. The rear trim rings are still not right, though. I am getting some aluminum ones to install to match the fronts.

Agent915 · 03-22-2014, 10:55 PM

Bumpy da bump

del4fun · 03-25-2014, 10:51 PM

Quote:

Originally Posted by Jtuhsotrinn

Here's my Ridlers 20x8.5 20x10

Looks good man

del4fun · 04-21-2014, 07:30 PM

Quote:

Originally Posted by suspect

Intro Twisted Vista II 20x8.5" 5.5 BS 20x10" 5" BS

Got any new photos?

suspect · 04-21-2014, 09:42 PM

I start wet sanding this week. Hopefully will be laying down some paint this weekend.

Bennett68C10 · 04-21-2014, 10:26 PM

Looks great Daniel, what color are you going with?

engineer_gregh · 04-21-2014, 10:47 PM

Wow, those wheels are awesome! I think I have a new favorite Bennett68C10.

Famous Tater · 04-22-2014, 11:31 AM

My '72 w/ 22" Raceline Phat Bullets. 8.5's in front and 10's out back w/ 265/35 and 285/35's.

magwakeenercew2jh · 04-22-2014, 12:16 PM

Quote:

Originally Posted by Famous Tater

My '72 w/ 22" Raceline Phat Bullets. 8.5's in front and 10's out back w/ 265/35 and 285/35's.

Famous,

Your truck's absolutely beautiful the way she sits. But, everyone takes their coffee differently...So, I couldn't help but make your ride *mine*.

Famous Tater · 04-22-2014, 12:50 PM

Dude...no problem!

Honestly, the truck does sit lower than this pic actually shows but not low enough for me and actually dropped spindles and blocks for the rear are coming in a week!! That will actually put the front half an inch over the tire in the front and the rear will sit right at the top of the tire.

Believe me, I photoshop every single pic I take. I have every one of them saved as normal and then a second photoshopped with it dropped! Lol. Some sitting like it "should" sit once the components are on and others slammed as if air ride. I was contemplating air ride forever but just don't want to sink the $$$ in it at this point.

Here are some examples of both...First is with air and the second is hopefully where it will actually be??

magwakeenercew2jh · 04-22-2014, 02:24 PM

Quote:

Originally Posted by Famous Tater

Dude...no problem!

Believe me, I photoshop every single pic I take....snip... I have every one of them saved as normal and then a second photoshopped with it dropped! Lol.

I hear you. Mine will never be as low as shot #2 or as high as #3. Gotta make her work some in the garden/yard. And, she's not a 4 x 4......and I'm too short and old....

Some of the guys and gals on the Forum have it right...We all need more than one truck!!!

For me, I already have too much in RAT. I'm a one-truck-guy. But I love 'em all.

suspect · 04-25-2014, 09:51 AM

Quote:

Originally Posted by Bennett68C10

Looks great Daniel, what color are you going with?

Sorry for the delay. I've been working on my truck every spare minute I have trying to get on the road. I'm painting it a charcoal metallic color. In my build thread, pg 10 post 244, I have the interior and firewall painted. I painted the insides of the doors last night. I'll try and update my build this weekend.

ochre70 · 04-25-2014, 10:35 AM

New 15x7 Wheel Vintiques Smoothies. Eventually going to do some center caps or something.

del4fun · 05-03-2014, 11:21 PM

Quote:

Originally Posted by Famous Tater

Dude...no problem!

Honestly, the truck does sit lower than this pic actually shows but not low enough for me and actually dropped spindles and blocks for the rear are coming in a week!! That will actually put the front half an inch over the tire in the front and the rear will sit right at the top of the tire.

Believe me, I photoshop every single pic I take. I have every one of them saved as normal and then a second photoshopped with it dropped! Lol. Some sitting like it "should" sit once the components are on and others slammed as if air ride. I was contemplating air ride forever but just don't want to sink the $$$ in it at this point.

Here are some examples of both...First is with air and the second is hopefully where it will actually be??

Nice, what's the drop 6/5, on the hopefull second?

danman987123 · 05-05-2014, 12:20 AM

Here is my boss 338's up close

danman987123 · 05-05-2014, 12:22 AM

Here is side pic of truck 20x8.5 and 20x10

Famous Tater · 05-05-2014, 09:37 AM

Quote:

Originally Posted by del4fun

Nice, what's the drop 6/5, on the hopefull second?

Del...yes, should end up to be about that. 5 front, 6 rear.

TwinsSpeedShop · 05-05-2014, 11:56 AM

So many nice trucks posted here! Note sure is in the same company but I'll play along

del4fun · 05-10-2014, 12:01 AM

Quote:

Originally Posted by TwinsSpeedShop

So many nice trucks posted here! Note sure is in the same company but I'll play along

Did you paint the wheels?

del4fun · 05-16-2014, 09:24 PM

Stock wheels are OK

C10agent · 05-17-2014, 12:36 AM

American Racing Daytonas 20x8.5/20x9.5

mechanic350 · 05-17-2014, 10:37 AM

I'd like to run these American racing wheels on my 1972. 18x9 in front and 18x10 or 12 In the rear.

mechanic350 · 05-17-2014, 10:43 AM

Probably should have added a pic of the truck now.

TwinsSpeedShop · 05-17-2014, 02:38 PM

Quote:

Originally Posted by del4fun

Did you paint the wheels?

No it's a new finish for the 338's! Here's another pic

03-15-2014, 03:32 PM	#352
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Post those wheels gallery Finished installing the right lug nuts and rally caps for my new wheels. The rear trim rings are still not right, though. I am getting some aluminum ones to install to match the fronts. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-22-2014, 10:55 PM	#353
Agent915 Registered User Join Date: Oct 2009 Location: Alabama Posts: 228	Re: Post those wheels gallery Bumpy da bump

04-21-2014, 09:42 PM	#356
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Post those wheels gallery I start wet sanding this week. Hopefully will be laying down some paint this weekend. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

04-21-2014, 10:26 PM	#357
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Post those wheels gallery Looks great Daniel, what color are you going with? __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-21-2014, 10:47 PM	#358
engineer_gregh Registered User Join Date: Feb 2012 Location: Smyrna TN Posts: 1,153	Re: Post those wheels gallery Wow, those wheels are awesome! I think I have a new favorite Bennett68C10.

04-22-2014, 11:31 AM	#359
Famous Tater Registered User Join Date: Nov 2013 Location: Richmond, VA Posts: 68	Re: Post those wheels gallery My '72 w/ 22" Raceline Phat Bullets. 8.5's in front and 10's out back w/ 265/35 and 285/35's. Attached Images

04-22-2014, 12:50 PM	#361
Famous Tater Registered User Join Date: Nov 2013 Location: Richmond, VA Posts: 68	Re: Post those wheels gallery Dude...no problem! Honestly, the truck does sit lower than this pic actually shows but not low enough for me and actually dropped spindles and blocks for the rear are coming in a week!! That will actually put the front half an inch over the tire in the front and the rear will sit right at the top of the tire. Believe me, I photoshop every single pic I take. I have every one of them saved as normal and then a second photoshopped with it dropped! Lol. Some sitting like it "should" sit once the components are on and others slammed as if air ride. I was contemplating air ride forever but just don't want to sink the $$$ in it at this point. Here are some examples of both...First is with air and the second is hopefully where it will actually be?? Attached Images

04-25-2014, 10:35 AM	#364
ochre70 Registered User Join Date: Nov 2013 Location: Fort Worth, TX Posts: 72	Re: Post those wheels gallery New 15x7 Wheel Vintiques Smoothies. Eventually going to do some center caps or something. Attached Images __________________ 1970 Ochre & White C10

05-05-2014, 12:20 AM	#366
danman987123 Registered User Join Date: Apr 2008 Location: texas Posts: 127	Re: Post those wheels gallery Here is my boss 338's up close Attached Images

05-05-2014, 12:22 AM	#367
danman987123 Registered User Join Date: Apr 2008 Location: texas Posts: 127	Re: Post those wheels gallery Here is side pic of truck 20x8.5 and 20x10 Attached Images

05-05-2014, 11:56 AM	#369
TwinsSpeedShop Registered User Join Date: Mar 2014 Location: Easley SC Posts: 150	Re: Post those wheels gallery So many nice trucks posted here! Note sure is in the same company but I'll play along Attached Images

05-16-2014, 09:24 PM	#371
del4fun Registered User Join Date: Nov 2011 Location: Vacaville, California Posts: 215	Re: Post those wheels gallery Stock wheels are OK __________________ US ARMY RET, SUPPORT THE TROOPS 1972 Custom/10 Short Fleet 4.5/ 5 Drop Dogg Pound Customs

05-17-2014, 12:36 AM	#372
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Re: Post those wheels gallery American Racing Daytonas 20x8.5/20x9.5 Attached Images __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!

05-17-2014, 10:37 AM	#373
mechanic350 Registered User Join Date: Oct 2013 Location: Bremerton, WA Posts: 287	Re: Post those wheels gallery I'd like to run these American racing wheels on my 1972. 18x9 in front and 18x10 or 12 In the rear. Attached Images __________________ 1972 Chevrolet swb fleet side. - SOLD 2018 Toyota Tacoma but hunting for another C10 Link to my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=607303 Instagram: https://www.instagram.com/72c10shortbox/?hl=en

05-17-2014, 10:43 AM	#374
mechanic350 Registered User Join Date: Oct 2013 Location: Bremerton, WA Posts: 287	Re: Post those wheels gallery Probably should have added a pic of the truck now. Attached Images __________________ 1972 Chevrolet swb fleet side. - SOLD 2018 Toyota Tacoma but hunting for another C10 Link to my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=607303 Instagram: https://www.instagram.com/72c10shortbox/?hl=en



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.