TN wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

keh27 · 05-19-2014, 09:17 AM

WTB NICE VALVE COVERS AND TIMING COVER WITH NO DENTS. Thanks

**Ironhorse** · 05-19-2014, 04:48 PM

I'll look thru my parts stash and see what I have. Have some early closed scripted and closed 327 covers, not sure about the '69-72 350 covers. Used one set on my '71 4x4 when I detailed the engine compartment.

keh27 · 05-19-2014, 05:21 PM

Quote:

Originally Posted by Ironhorse

I'll look thru my parts stash and see what I have. Have some early closed scripted and closed 327 covers, not sure about the '69-72 350 covers. Used one set on my '71 4x4 when I detailed the engine compartment.

thank you sir

**Ironhorse** · 05-19-2014, 06:21 PM

Found two valve covers but not sure they are a "pair". Both have PCV hole with rubber grommet, one is round and one is round with a flattened side. One cover has a round oil fill hole, no grommet. The other cover has the oil fill hole for the eared style twist in style cap, no cap. One cover is driver side with the wire loom tabs. Other cover I presume is passenger side, no wire loom tabs. Dirty and could use a cleaning.

Found two sbc timing chain covers. Both rusty and pitted. Bead blasted one a bit and will clean up but may show light pitting if looking for a NICE cover. Small square timing tab on one, the other has larger tri-angled looking tab.
Best I can come up with. Have sold a lot of my spare covers or used them.

Best I can come up with. Used or sold a lot of my spare valve covers, not many left. Let me know if interested and I could get some pics. Will be tomorrow as camera batteries need charging.

teeitup · 05-19-2014, 06:33 PM

here is what a stock 72 set looks like, I'll have a set off a 72 next week, if Gary can't help you out

**Ironhorse** · 05-19-2014, 06:41 PM

keh27, looks like Randy can get you fixed up on the covers. Those should clean up pretty nice.

You The Man, Randy

teeitup · 05-19-2014, 07:08 PM

Not trying to step on your toes Gary, if you have a set, by all means go ahead.

**Ironhorse** · 05-19-2014, 07:23 PM

No problemo, Randy. Don't think the ones I have are completeset / year correct. Think they may be differant year issues. It's all good.

teeitup · 05-19-2014, 10:00 PM

here is the engine they would coming off of, $20 plus shipping for them

keh27 · 05-19-2014, 10:00 PM

thanks to you both.

keh27 · 05-19-2014, 10:02 PM

Quote:

Originally Posted by teeitup

here is the engine they would coming off of, $20 plus shipping for them

i'll take them, what kind of shape is the front cover in?

teeitup · 05-19-2014, 10:04 PM

Sorry I don't go down that far on motor, I just sell the easy stuff off them

keh27 · 05-20-2014, 01:29 PM

going to get the valve covers from teeitup, I still need a front timing cover

snipescastle2 · 05-20-2014, 02:45 PM

I have two timing covers, I'll send pictures later. I have one here at work with me, and one is at home.
Ben Smith

keh27 · 05-20-2014, 04:03 PM

Quote:

Originally Posted by snipescastle2

I have two timing covers, I'll send pictures later. I have one here at work with me, and one is at home.
Ben Smith

THANKS ben

keh27 · 05-20-2014, 09:34 PM

Quote:

Originally Posted by snipescastle2

I have two timing covers, I'll send pictures later. I have one here at work with me, and one is at home.
Ben Smith

any luck? thanks again

snipescastle2 · 05-21-2014, 08:15 AM

I'll take a pic this morning and post in a few minutes.
Ben

snipescastle2 · 05-21-2014, 08:52 AM

here are a few pictures of the timing cover. I can bead blast this if you like, the inside of the cover is clean, aside from the oil/carbon/varnish from being on the engine. I do have another at home, pretty sure it is the same, but I'll have to look some more, couldn't find it last night......
Here you go.....

keh27 · 05-21-2014, 09:27 AM

Quote:

Originally Posted by snipescastle2

here are a few pictures of the timing cover. I can bead blast this if you like, the inside of the cover is clean, aside from the oil/carbon/varnish from being on the engine. I do have another at home, pretty sure it is the same, but I'll have to look some more, couldn't find it last night......
Here you go.....

THANKS FOR THE PICS.
is that for a 8 inch balancer?

keh27 · 05-21-2014, 03:42 PM

Quote:

Originally Posted by keh27

THANKS FOR THE PICS.
is that for a 8 inch balancer?

i'm asking because I ordered a new one and when I got it was for the smaller balancer and wouldn't work

teeitup · 05-21-2014, 04:07 PM

I'll get the valve covers shipped out this week, Thanks

05-19-2014, 09:17 AM	#1
keh27 Registered User Join Date: Jul 2012 Location: franklin.tn Posts: 600	wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. WTB NICE VALVE COVERS AND TIMING COVER WITH NO DENTS. Thanks __________________ 69 step side http://67-72chevytrucks.com/vboard/s...d.php?t=613407

05-19-2014, 04:48 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. I'll look thru my parts stash and see what I have. Have some early closed scripted and closed 327 covers, not sure about the '69-72 350 covers. Used one set on my '71 4x4 when I detailed the engine compartment. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-19-2014, 06:21 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. Found two valve covers but not sure they are a "pair". Both have PCV hole with rubber grommet, one is round and one is round with a flattened side. One cover has a round oil fill hole, no grommet. The other cover has the oil fill hole for the eared style twist in style cap, no cap. One cover is driver side with the wire loom tabs. Other cover I presume is passenger side, no wire loom tabs. Dirty and could use a cleaning. Found two sbc timing chain covers. Both rusty and pitted. Bead blasted one a bit and will clean up but may show light pitting if looking for a NICE cover. Small square timing tab on one, the other has larger tri-angled looking tab. Best I can come up with. Have sold a lot of my spare covers or used them. Best I can come up with. Used or sold a lot of my spare valve covers, not many left. Let me know if interested and I could get some pics. Will be tomorrow as camera batteries need charging. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-19-2014, 06:33 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. here is what a stock 72 set looks like, I'll have a set off a 72 next week, if Gary can't help you out Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-19-2014, 06:41 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. keh27, looks like Randy can get you fixed up on the covers. Those should clean up pretty nice. You The Man, Randy __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-19-2014, 07:08 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. Not trying to step on your toes Gary, if you have a set, by all means go ahead. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-19-2014, 07:23 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. No problemo, Randy. Don't think the ones I have are completeset / year correct. Think they may be differant year issues. It's all good. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-19-2014, 10:00 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. here is the engine they would coming off of, $20 plus shipping for them Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-19-2014, 10:04 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. Sorry I don't go down that far on motor, I just sell the easy stuff off them __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-20-2014, 01:29 PM	#13
keh27 Registered User Join Date: Jul 2012 Location: franklin.tn Posts: 600	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. going to get the valve covers from teeitup, I still need a front timing cover __________________ 69 step side http://67-72chevytrucks.com/vboard/s...d.php?t=613407

05-20-2014, 02:45 PM	#14
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. I have two timing covers, I'll send pictures later. I have one here at work with me, and one is at home. Ben Smith

05-21-2014, 08:15 AM	#17
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. I'll take a pic this morning and post in a few minutes. Ben

05-21-2014, 08:52 AM	#18
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. here are a few pictures of the timing cover. I can bead blast this if you like, the inside of the cover is clean, aside from the oil/carbon/varnish from being on the engine. I do have another at home, pretty sure it is the same, but I'll have to look some more, couldn't find it last night...... Here you go..... Attached Images

05-21-2014, 04:07 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: wtb 69-72 ORIGNAL VALVE COVERS AND FRONT TIMING COVER. I'll get the valve covers shipped out this week, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.