CA Parting 74 Jimmy (Blazer) - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 03-08-2011, 02:11 PM

Quote:

Originally Posted by ScottH

Hi Ray, was wondering if the GMC grill emblem is part of the grill or does it come off as a separate piece? If part of the grill I would be interested in the GMC letters from the tailgate. Please LMK price on each as well (shipped to 08753).

Thanks
Scott

Scott, The grille emblem is $20 shipped to NJ. Sorry, the tailgate letters went with the tub.
Thanks, Ray

**ScottH** · 03-08-2011, 08:07 PM

Thanks Ray, can up PM me payment info.

Scott

KrazyRay · 03-08-2011, 10:25 PM

pm sent

azjaeger · 03-08-2011, 11:21 PM

Quote:

Originally Posted by KrazyRay

I can do $25 shipped to AZ. I have a couple of good sets.
Thanks, Ray

Ray: I'll take a set if Paypal is ok...let me know and I'll PM you.
Thanks, Matt

glimmertwin01 · 03-09-2011, 11:36 AM

ray
Im still interested in the amber lenses for the front directionals the radio knob set and I was wondering.... does this K5 have the stainless trim that goes in the rear side window areas where the top bolts to the bed sides? they are 73-75 only pieces.. they dont have to be perfect..just good.
I need a second set for my 73.... (I have a set for the 74) are you getting another K5 to part out?
Dan

KrazyRay · 03-10-2011, 11:51 AM

I have a 73 Blazer that I will sell a few parts off of, but this thing runs so good that I'm using it as the ranch truck for a while. The stainless piece sets on the fiberglass and the bolts go through it to hold the top down? Is that the part?

glimmertwin01 · 03-10-2011, 08:51 PM

yes those are what Im talking about...they are 73-75 only due to the design of the top ..

KrazyRay · 03-13-2011, 10:19 AM

Dan, Let me research selling these separate from the top...the last top I sold, the guy wanted all of the mounting pieces to go with it.
Thanks,
Ray

glimmertwin01 · 03-13-2011, 10:43 AM

well if I was out that way id take the whole top....lol I took mine off a 73 top that now i need the top/// such is life
ideally id take the front half and make it a half top... so i wouldnt need the rails but for now i do.... i can bolt it down and use big fender washers in the interim but it be nice to have the pieces

1974ChevyC10 · 03-27-2011, 10:59 AM

Do you still have the steering column and if so whats the cost of shipping to 86001?Do you also have the brake pedal assembly and if so how much would sell it for plus shipping to 86001 as well?Can you give me separate price quotes as im interested in them individually as well as a package?Let me know please.Could you also give me a quote on the cost of the two brake pedal assembly sets and the manual trans column plus shipping to 86001?Thank you in advance.

KrazyRay · 03-27-2011, 11:11 PM

The steering column is $50 shipped to AZ (no key)
The brake/clutch pedal assembly is $44 shipped to AZ.
Thanks,
Ray

*scottsdaleowner75* · 03-28-2011, 04:48 PM

How much for the transfer case boot and retaining ring shipped to 92407?

KrazyRay · 03-28-2011, 07:25 PM

Quote:

Originally Posted by scottsdaleowner75

How much for the transfer case boot and retaining ring shipped to 92407?

Its $22 shipped to socal.
Thanks,
Ray

*scottsdaleowner75* · 03-29-2011, 01:36 AM

Is it in decent shape and any pics?

sighlurr · 03-31-2012, 03:06 AM

I'll take 2 15x7 steel wheels if you still have them and are willing to break up the pair.

I'm up in Sacramento again next Tuesday.

stormbear · 03-31-2012, 07:51 AM

Ray, If you have the passenger seat hold down bracket i'll take it.price-shipped to 12725, Thanks Dave

esbstuff · 03-31-2012, 01:25 PM

FYI 203's were orginally available on 4-speeds along with the 205's... If you look at the pictures, there is a 203 shifter (square vs round) sticking through the floor.

Quote:

Originally Posted by jerry moss

Ray,
not trying to second guess since you have the truck but i thought 4 speed trucks in that era had 205s behind them. i could be wrong-have been many times before-but was curious. looking at the pics, it looks like it has stock spicer hubs on it. i had a 73 K10 many years ago that actually had a turbo 350/205 combo from the factory and it had the spicer hubs.

KrazyRay · 03-31-2012, 09:32 PM

Sorry, this one is long gone.

88Jimmy4x4 · 03-31-2012, 09:57 PM

how much for the just these 2 grille brackets that are on the core support?

KrazyRay · 03-31-2012, 10:11 PM

Sorry, I don't have any parts from this one (old thread). The brackets you are looking for are hard to come by. Some of the 73-74 were bolted on and most were part of the core support.

ECU PIRATE · 04-02-2012, 07:48 AM

Ray

Anything left on this one. I might be in need of a lower steering shaft (in between the column and the steering gear box) for a 76' column I just picked up on trade. Anything like that lying around and how much shipped to 20121?

Mike

K5Rodder · 05-28-2014, 07:21 PM

Still have the body trim pieces that ran around the body lines?

03-08-2011, 08:07 PM	#52
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 74 Jimmy (Blazer) Thanks Ray, can up PM me payment info. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-08-2011, 10:25 PM	#53
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) pm sent

03-09-2011, 11:36 AM	#55
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 74 Jimmy (Blazer) ray Im still interested in the amber lenses for the front directionals the radio knob set and I was wondering.... does this K5 have the stainless trim that goes in the rear side window areas where the top bolts to the bed sides? they are 73-75 only pieces.. they dont have to be perfect..just good. I need a second set for my 73.... (I have a set for the 74) are you getting another K5 to part out? Dan __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

03-10-2011, 11:51 AM	#56
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) I have a 73 Blazer that I will sell a few parts off of, but this thing runs so good that I'm using it as the ranch truck for a while. The stainless piece sets on the fiberglass and the bolts go through it to hold the top down? Is that the part?

03-10-2011, 08:51 PM	#57
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 74 Jimmy (Blazer) yes those are what Im talking about...they are 73-75 only due to the design of the top .. __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

03-13-2011, 10:19 AM	#58
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) Dan, Let me research selling these separate from the top...the last top I sold, the guy wanted all of the mounting pieces to go with it. Thanks, Ray

03-13-2011, 10:43 AM	#59
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting 74 Jimmy (Blazer) well if I was out that way id take the whole top....lol I took mine off a 73 top that now i need the top/// such is life ideally id take the front half and make it a half top... so i wouldnt need the rails but for now i do.... i can bolt it down and use big fender washers in the interim but it be nice to have the pieces __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

03-27-2011, 10:59 AM	#60
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	Re: Parting 74 Jimmy (Blazer) Do you still have the steering column and if so whats the cost of shipping to 86001?Do you also have the brake pedal assembly and if so how much would sell it for plus shipping to 86001 as well?Can you give me separate price quotes as im interested in them individually as well as a package?Let me know please.Could you also give me a quote on the cost of the two brake pedal assembly sets and the manual trans column plus shipping to 86001?Thank you in advance. __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

03-27-2011, 11:11 PM	#61
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) The steering column is $50 shipped to AZ (no key) The brake/clutch pedal assembly is $44 shipped to AZ. Thanks, Ray

03-28-2011, 04:48 PM	#62
scottsdaleowner75 Account Suspended Join Date: Mar 2010 Location: So. Cal, Inland Empire Posts: 199	Re: Parting 74 Jimmy (Blazer) How much for the transfer case boot and retaining ring shipped to 92407?

03-29-2011, 01:36 AM	#64
scottsdaleowner75 Account Suspended Join Date: Mar 2010 Location: So. Cal, Inland Empire Posts: 199	Re: Parting 74 Jimmy (Blazer) Is it in decent shape and any pics?

03-31-2012, 03:06 AM	#65
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: Parting 74 Jimmy (Blazer) I'll take 2 15x7 steel wheels if you still have them and are willing to break up the pair. I'm up in Sacramento again next Tuesday. Last edited by sighlurr; 03-31-2012 at 10:33 AM.

03-31-2012, 07:51 AM	#66
stormbear Registered User Join Date: May 2011 Location: Claryville NY Posts: 35	Re: Parting 74 Jimmy (Blazer) Ray, If you have the passenger seat hold down bracket i'll take it.price-shipped to 12725, Thanks Dave

03-31-2012, 09:32 PM	#68
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) Sorry, this one is long gone.

03-31-2012, 09:57 PM	#69
88Jimmy4x4 Registered User Join Date: Oct 2003 Location: houston, texas Posts: 1,974	Re: Parting 74 Jimmy (Blazer) how much for the just these 2 grille brackets that are on the core support? Attached Images __________________ 2008 Silverado Z71 RCSB 1991 GMC Jimmy 4x4 1976 GMC Sierra C15 SWB



Register or Log In To remove these advertisements.

03-31-2012, 10:11 PM	#70
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 74 Jimmy (Blazer) Sorry, I don't have any parts from this one (old thread). The brackets you are looking for are hard to come by. Some of the 73-74 were bolted on and most were part of the core support.

04-02-2012, 07:48 AM	#71
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: Parting 74 Jimmy (Blazer) Ray Anything left on this one. I might be in need of a lower steering shaft (in between the column and the steering gear box) for a 76' column I just picked up on trade. Anything like that lying around and how much shipped to 20121? Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

05-28-2014, 07:21 PM	#72
K5Rodder Registered User Join Date: May 2014 Location: Kannapolis, NC Posts: 79	Re: Parting 74 Jimmy (Blazer) Still have the body trim pieces that ran around the body lines?

Register or Log In To remove these advertisements.