MN Parting 1971 Ochre C20 Custom Deluxe - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 06-01-2014, 12:04 AM

Pretty original truck. Interior didn't see much UV exposure. Engine has spun bearing I believe.
Cab only has rust down low (rockers, supports are at 40%, floor at 80%) jmader has 1st shot $400
Dash pad- some warpage- $50 SOLD local
High hump- $65 shipped CONUS Pending sale
Steering wheel has cracks but usable for driver $70 shipped SOLD local
Horn cap- $20 shipped CONUS SOLD local
Very nice hood- $100 picked up
Glovebox door- $35 shipped CONUS
Visors and bed are for me.
Driver door panel isn't good, pass door panel is ok- SOLD local
Heater ducting and boxes- SOLD local
Seatbelts, Upper side trim., gas pedal- SOLD local

No power steering.
Grille has issues, not worth shipping.

I should have time to begin tear apart on Monday. I work a full time job, about 50 hours a week or more so please only post if you are serious about something. Please ask questions in thread and save PM's for payment info.

**leddzepp** · 06-01-2014, 12:08 AM

How much for the radio delete plate Jud?

**TBONE1964** · 06-01-2014, 12:11 AM

I'll get in line for the radio delete plate. What a great color it is

Vintage Windmills · 06-01-2014, 12:17 AM

sorry guys I'm keeping it for my K20 build. it was actually the one part that tipped me off the fence about buying the truck.

Daddy'O · 06-01-2014, 12:28 AM

Put me first for the rear view mirror assembly and the trans shifter knob and boot. Please post pics and price for 76273 zip.

The interior looks to be in really great shape.

Thanks!

**TBONE1964** · 06-01-2014, 12:34 AM

Quote:

Originally Posted by Vintage Windmills

sorry guys I'm keeping it for my K20 build. it was actually the one part that tipped me off the fence about buying the truck.

Fair enough sir. Does it have the radio delete cowl with no antenna hole also?

No sure if you would ship it and if it would be worth it to 48371

That is if you are not keeping it also. It kind of goes hand in hand with the radio delete plate.

Good luck with the sales.

Karl's Kustoms · 06-01-2014, 06:52 AM

Could you price the window regulators and cranks shipped to 29307, if they are working properly?

Thanks,
Karl

69-72 · 06-01-2014, 09:14 AM

Have a sway bar setup for sale?

Dirt's72 · 06-01-2014, 10:09 AM

I'll take the dash pad if the warping isn't too bad. Can you take a closer pic?
Thanks.

**WestButteTruck** · 06-01-2014, 10:16 AM

Could I get pics and price for the heater controls please? Thanks.

Youey · 06-01-2014, 09:44 PM

Could I get a price on gas pedal assembly, brackets, and rod that goes to carb/what ever hardware there is.
Thanks

**lolife99** · 06-01-2014, 09:55 PM

I'll take the high hump.
Pm me for payment.

**jlmerie** · 06-01-2014, 10:42 PM

Interested in the upper side trim. What I can see looks ok. I am assuming this is a long bed. How much shipped to 80516?

rusted72' · 06-01-2014, 11:06 PM

could i get more pics of the steering wheel please
thanks

Vintage Windmills · 06-01-2014, 11:58 PM

Quote:

Originally Posted by Daddy'O

Put me first for the rear view mirror assembly and the trans shifter knob and boot. Please post pics and price for 76273 zip.

The interior looks to be in really great shape.

Thanks!

Mirror has some etching defects in chrome, boot may be repro. Shifter knob should clean up, looks a little hazy, boot is nice will get pics tomorrow If you're still interested at $45 shipped for everything or $30 shipped without mirror setup.

Quote:

Originally Posted by TBONE1964

Fair enough sir. Does it have the radio delete cowl with no antenna hole also?

No sure if you would ship it and if it would be worth it to 48371

That is if you are not keeping it also. It kind of goes hand in hand with the radio delete plate.

Good luck with the sales.

Yep, keeping with plate, thank you for being understanding.

Quote:

Originally Posted by Karl's Kustoms

Could you price the window regulators and cranks shipped to 29307, if they are working properly?

Thanks,
Karl

Pass side isn't good. Driver side feels good, $40 shipped.

Quote:

Originally Posted by 69-72

Have a sway bar setup for sale?

Yep, I think its the larger size these trucks came with. $40 plus shipping. I'm guessing shipping to Canada will kill the deal, but if you want to do a quick estimate based on fedex size and weight from 55020 we can go from there.

Quote:

Originally Posted by Dirt's72

I'll take the dash pad if the warping isn't too bad. Can you take a closer pic?
Thanks.

Sorry sold local

Quote:

Originally Posted by WestButteTruck

Could I get pics and price for the heater controls please? Thanks.

Has been fixed with screws through face. Nice intact smooth levers 29 shipped

Quote:

Originally Posted by Youey

Could I get a price on gas pedal assembly, brackets, and rod that goes to carb/what ever hardware there is.
Thanks

gas pedal assembly sold local, rod may still be there

Quote:

Originally Posted by lolife99

I'll take the high hump.
Pm me for payment.

Sounds good, PM sending

Quote:

Originally Posted by jlmerie

Interested in the upper side trim. What I can see looks ok. I am assuming this is a long bed. How much shipped to 80516?

sold local. I have others like this, what pieces do you need?

Quote:

Originally Posted by rusted72'

could i get more pics of the steering wheel please
thanks

sold local today with other stuff

Vintage Windmills · 06-02-2014, 12:03 AM

pics

**lolife99** · 06-02-2014, 05:59 AM

Quote:

Originally Posted by Vintage Windmills

Sounds good, PM sending

Paypal money sent!

69-72 · 06-02-2014, 08:22 AM

Quote:

Originally Posted by Vintage Windmills

Yep, I think its the larger size these trucks came with. $40 plus shipping. I'm guessing shipping to Canada will kill the deal, but if you want to do a quick estimate based on fedex size and weight from 55020 we can go f

I would get it shipped to 58271. Pembina, ND.

Would it come with the mounting brackets?

amashal · 06-02-2014, 09:18 AM

How much for porportioning valve shipped to 75002? Mine rusted up.

Thanks,

Alex E.

**jlmerie** · 06-02-2014, 09:45 AM

I was wanting to try and get a complete replacement set. The PO sprayed primer over everything. I was trying to pay the shipping only once. But I definitely need both sides of a long bed. And of course, I am looking for good decent used pieces. Not show, but not all beat up either. Thanks

thefraze_1020 · 06-02-2014, 10:24 AM

How much for the air cleaner to 98273?

And are the exhaust manifolds and heat shields any good?

Vintage Windmills · 06-02-2014, 10:42 AM

Quote:

Originally Posted by lolife99

Paypal money sent!

got it, thanks! Are you in a hurry or can i send with a group when more parts are sold?

Quote:

Originally Posted by 69-72

I would get it shipped to 58271. Pembina, ND.

Would it come with the mounting brackets?

yep, those and the ones on the a arms included. Its all included except maybe the old bolts if i fight them.

Quote:

Originally Posted by amashal

How much for porportioning valve shipped to 75002? Mine rusted up.

Thanks,

Alex E.

$20 shipped

Quote:

Originally Posted by jlmerie

I was wanting to try and get a complete replacement set. The PO sprayed primer over everything. I was trying to pay the shipping only once. But I definitely need both sides of a long bed. And of course, I am looking for good decent used pieces. Not show, but not all beat up either. Thanks

ok, i will keep an eye out

Quote:

Originally Posted by thefraze_1020

How much for the air cleaner to 98273?

And are the exhaust manifolds and heat shields any good?

cleaner with riser tube 55 shipped, manifolds and heat shiels look good, 60 shipped for that or one hundred shipped for all.

serge · 06-02-2014, 10:43 AM

Hello,
Interested in passenger side vent door with hardware and knob.
Also battery tray if decent.
Would ship to 44041
Thanks,
Serge

Daddy'O · 06-02-2014, 10:46 AM

Quote:

Mirror has some etching defects in chrome, boot may be repro. Shifter knob should clean up, looks a little hazy, boot is nice will get pics tomorrow If you're still interested at $45 shipped for everything or $30 shipped without mirror setup.

Interested in all - please post pics. Thanks!

thefraze_1020 · 06-02-2014, 11:29 AM

Quote:

Originally Posted by Vintage Windmills

cleaner with riser tube 55 shipped, manifolds and heat shiels look good, 60 shipped for that or one hundred shipped for all.

I'll take the cleaner, manifolds, and heat shields. PM me your PayPal.

06-01-2014, 12:04 AM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Parting 1971 Ochre C20 Custom Deluxe Pretty original truck. Interior didn't see much UV exposure. Engine has spun bearing I believe. Cab only has rust down low (rockers, supports are at 40%, floor at 80%) jmader has 1st shot $400 Dash pad- some warpage- $50 SOLD local High hump- $65 shipped CONUS Pending sale Steering wheel has cracks but usable for driver $70 shipped SOLD local Horn cap- $20 shipped CONUS SOLD local Very nice hood- $100 picked up Glovebox door- $35 shipped CONUS Visors and bed are for me. Driver door panel isn't good, pass door panel is ok- SOLD local Heater ducting and boxes- SOLD local Seatbelts, Upper side trim., gas pedal- SOLD local No power steering. Grille has issues, not worth shipping. I should have time to begin tear apart on Monday. I work a full time job, about 50 hours a week or more so please only post if you are serious about something. Please ask questions in thread and save PM's for payment info. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 06-02-2014 at 12:08 AM.

06-01-2014, 12:08 AM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,020	Re: Parting 1971 Ochre C20 Custom Deluxe How much for the radio delete plate Jud? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-01-2014, 12:11 AM	#3
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parting 1971 Ochre C20 Custom Deluxe I'll get in line for the radio delete plate. What a great color it is __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

06-01-2014, 12:17 AM	#4
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 1971 Ochre C20 Custom Deluxe sorry guys I'm keeping it for my K20 build. it was actually the one part that tipped me off the fence about buying the truck. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-01-2014, 12:28 AM	#5
Daddy'O Registered User Join Date: Jan 2012 Location: Whitesboro, Texas Posts: 932	Re: Parting 1971 Ochre C20 Custom Deluxe Put me first for the rear view mirror assembly and the trans shifter knob and boot. Please post pics and price for 76273 zip. The interior looks to be in really great shape. Thanks! __________________ Cheers - Wayne Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966 '55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157 1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy" 1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55 Nothing sucks more than that moment during an argument when you realize you're wrong.

06-01-2014, 06:52 AM	#7
Karl's Kustoms Registered User Join Date: Aug 2013 Location: Spartanburg, SC Posts: 32	Re: Parting 1971 Ochre C20 Custom Deluxe Could you price the window regulators and cranks shipped to 29307, if they are working properly? Thanks, Karl

06-01-2014, 09:14 AM	#8
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Parting 1971 Ochre C20 Custom Deluxe Have a sway bar setup for sale? __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery Last edited by 69-72; 06-01-2014 at 09:34 AM.

06-01-2014, 10:09 AM	#9
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Parting 1971 Ochre C20 Custom Deluxe I'll take the dash pad if the warping isn't too bad. Can you take a closer pic? Thanks.

06-01-2014, 10:16 AM	#10
WestButteTruck Kung Fu Master Join Date: Oct 2005 Location: Montana Posts: 547	Re: Parting 1971 Ochre C20 Custom Deluxe Could I get pics and price for the heater controls please? Thanks. __________________ 72 GMC SuperCustom 4x4 1972 Chevrolet Cheyenne Super 4x4

06-01-2014, 09:44 PM	#11
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: Parting 1971 Ochre C20 Custom Deluxe Could I get a price on gas pedal assembly, brackets, and rod that goes to carb/what ever hardware there is. Thanks

06-01-2014, 09:55 PM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Parting 1971 Ochre C20 Custom Deluxe I'll take the high hump. Pm me for payment. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

06-01-2014, 10:42 PM	#13
jlmerie Registered User Join Date: Sep 2005 Location: Colorado Posts: 1,077	Re: Parting 1971 Ochre C20 Custom Deluxe Interested in the upper side trim. What I can see looks ok. I am assuming this is a long bed. How much shipped to 80516? __________________ James

06-01-2014, 11:06 PM	#14
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: Parting 1971 Ochre C20 Custom Deluxe could i get more pics of the steering wheel please thanks

06-02-2014, 12:03 AM	#16
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 1971 Ochre C20 Custom Deluxe pics __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-02-2014, 09:18 AM	#19
amashal Registered User Join Date: Mar 2008 Location: Allen,TX Posts: 223	Re: Parting 1971 Ochre C20 Custom Deluxe How much for porportioning valve shipped to 75002? Mine rusted up. Thanks, Alex E.



Register or Log In To remove these advertisements.

06-02-2014, 09:45 AM	#20
jlmerie Registered User Join Date: Sep 2005 Location: Colorado Posts: 1,077	Re: Parting 1971 Ochre C20 Custom Deluxe I was wanting to try and get a complete replacement set. The PO sprayed primer over everything. I was trying to pay the shipping only once. But I definitely need both sides of a long bed. And of course, I am looking for good decent used pieces. Not show, but not all beat up either. Thanks __________________ James

06-02-2014, 10:24 AM	#21
thefraze_1020 Registered User Join Date: Mar 2014 Location: Mount Vernon, WA Posts: 417	Re: Parting 1971 Ochre C20 Custom Deluxe How much for the air cleaner to 98273? And are the exhaust manifolds and heat shields any good? __________________ Cameron 1984 Chevy C20 Custom Deluxe

06-02-2014, 10:43 AM	#23
serge Registered User Join Date: Oct 2012 Location: Geneva, Ohio Posts: 201	Re: Parting 1971 Ochre C20 Custom Deluxe Hello, Interested in passenger side vent door with hardware and knob. Also battery tray if decent. Would ship to 44041 Thanks, Serge

Register or Log In To remove these advertisements.