|
06-04-2014, 01:20 AM
|
#1 |
|
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
raise front 3/4 inch
I need to raise the front of my 87 3/4 of an inch. I currently have drop spindles and one coil cut off of the stock OEM coil. I am thinking the coil cut dropped it about 1.5 to 2 inches. I am thinking about getting some 1" lowering coils, or cutting another set 1/2 coil? Any thoughts? I have received some good advice here, and hope I can fix this without too much hassle or money...
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
|
|
|
06-04-2014, 11:16 PM
|
#2 |
|
Registered User
Join Date: Mar 2012
Location: Lancaster,SC
Posts: 74
|
Re: raise front 3/4 inch
I'd try cutting another set like you described
|
|
|
|
|
06-05-2014, 07:13 AM
|
#3 |
|
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: raise front 3/4 inch
I have not been able to find a set of one inch drop coils, I may have to go that route.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
