KS need drivers side manifold 66 283 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

travz500 · 05-23-2014, 10:48 AM

need a driver side manifold for a 66 3/4 ton 2 wheel drive truck must have good studs or studs out can add pictures here or send to my cell phone 785 806-8372

travz500 · 05-28-2014, 12:50 AM

Anyone ??

65 C20 · 05-28-2014, 11:17 AM

Check out the 67-72 parts section.
I believe there is a set over there.
Cash3481

**rideblue00** · 05-28-2014, 12:17 PM

angled or straight down?

travz500 · 05-29-2014, 12:11 AM

Quote:

Originally Posted by rideblue00

angled or straight down?

Straight down must have place for alternator to bolt

**southern parts** · 05-29-2014, 08:58 PM

I think I have one. $30 plus shipping.it will be Saturday before I can get a picture if your interested.

travz500 · 05-30-2014, 02:48 PM

Quote:

Originally Posted by southern parts

I think I have one. $30 plus shipping.it will be Saturday before I can get a picture if your interested.

Yes I am interested as long as my alternator will bolt up and the studs are good or out with good threads. Very interested send pics to my phone if possible
785-806-8372

**southern parts** · 06-01-2014, 09:53 AM

the studs are a little thin near the manifold but should work fine if you use the correct brass nuts. it will fit into a large flat rate box. Add $17 45 for shipping. lmk if your interested. Thanks, Woody

travz500 · 06-05-2014, 10:24 AM

Dad took his to machine shop and had drilled out and tapped and new studs put on thanks anyhow

05-23-2014, 10:48 AM	#1
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	need drivers side manifold 66 283 need a driver side manifold for a 66 3/4 ton 2 wheel drive truck must have good studs or studs out can add pictures here or send to my cell phone 785 806-8372

05-28-2014, 12:50 AM	#2
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: need drivers side manifold 66 283 Anyone ??

05-28-2014, 11:17 AM	#3
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: need drivers side manifold 66 283 Check out the 67-72 parts section. I believe there is a set over there. Cash3481

05-28-2014, 12:17 PM	#4
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,859	Re: need drivers side manifold 66 283 angled or straight down?

05-29-2014, 08:58 PM	#6
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: need drivers side manifold 66 283 I think I have one. $30 plus shipping.it will be Saturday before I can get a picture if your interested.

06-01-2014, 09:53 AM	#8
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: need drivers side manifold 66 283 the studs are a little thin near the manifold but should work fine if you use the correct brass nuts. it will fit into a large flat rate box. Add $17 45 for shipping. lmk if your interested. Thanks, Woody Attached Images

06-05-2014, 10:24 AM	#9
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: need drivers side manifold 66 283 Dad took his to machine shop and had drilled out and tapped and new studs put on thanks anyhow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.