Clutch pedal raising cab?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tylervalo · 06-10-2014, 08:42 AM

I'm getting my truck put all back together, I put the Zbar back in and put the clutch linkage in. The Pedal is stiff but nothing unusual, but I noticed from the engine bay when having a helper press the clutch it's actually lifting the cab a little! Should be clutch be that stiff? It's an 84' K10, SM465 with mech linkage.

INSIDIOUS '86 · 06-10-2014, 11:14 PM

You have the front clip on? I noticed this on my stepside as well and my freinds did on thier trucks as well. The cab bushings are only rubber and the frame is pretty flexible too. Nothing to get to worried about. But if it bothers you energy suspension sells a body bushing kit for $75? I think. You will have to buy or re use your original hardware though.

tylervalo · 06-11-2014, 07:27 AM

I feel a bit better now. I have the front fenders in but no inner fenders or core support yet. I think I'll start slowly collecting everything for a hydraulic swap, I loved it on my '85.

**old Rusty C10** · 06-11-2014, 08:14 AM

mine used to flex some too on my 76

06-10-2014, 08:42 AM	#1
tylervalo Registered User Join Date: Sep 2011 Location: Knoxville, Tn Posts: 408	Clutch pedal raising cab?? I'm getting my truck put all back together, I put the Zbar back in and put the clutch linkage in. The Pedal is stiff but nothing unusual, but I noticed from the engine bay when having a helper press the clutch it's actually lifting the cab a little! Should be clutch be that stiff? It's an 84' K10, SM465 with mech linkage.

06-10-2014, 11:14 PM	#2
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Clutch pedal raising cab?? You have the front clip on? I noticed this on my stepside as well and my freinds did on thier trucks as well. The cab bushings are only rubber and the frame is pretty flexible too. Nothing to get to worried about. But if it bothers you energy suspension sells a body bushing kit for $75? I think. You will have to buy or re use your original hardware though. __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

06-11-2014, 07:27 AM	#3
tylervalo Registered User Join Date: Sep 2011 Location: Knoxville, Tn Posts: 408	Re: Clutch pedal raising cab?? I feel a bit better now. I have the front fenders in but no inner fenders or core support yet. I think I'll start slowly collecting everything for a hydraulic swap, I loved it on my '85.

06-11-2014, 08:14 AM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,299	Re: Clutch pedal raising cab?? mine used to flex some too on my 76 __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.