|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-09-2004, 12:42 AM
|
#1 |
|
Senior Member
 
Join Date: Sep 2002
Location: Hampstead, NC
Posts: 8,190
|
Panhard bar differences
Can anyone tell me the difference between the panhard bar from a 1/2 vs 3/4? Will one from a 3/4 fit a 1/2 truck? Any differences in bolts sizes, etc.?
Any info is appreciated. Thanks! |
|
|
|
01-09-2004, 03:33 AM
|
#2 |
|
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
Both the length and the diameter are larger on the 3/4 ton.
I just picked one up from a wrecker today. it looks like there is close to 10" -12" difference.
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
|
|
|
|
01-09-2004, 03:47 AM
|
#3 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
bushings are different size also.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
