|
06-14-2014, 09:40 PM
|
#1 |
|
Registered User
 Join Date: Jun 2011
Location: chillicothe mo
Posts: 225
|
quadra jet ID help
Im going to rebuild my Quarda Jet and the ID is missing. Anybody know what I have?
|
|
|
|
06-15-2014, 01:40 AM
|
#2 |
|
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: quadra jet ID help
Best way is to clean it up some and read the numbers that should be there.
http://www.cliffshighperformance.com...carb_ID_2.html http://www.digitalcorvettes.com/foru...79&postcount=2 For tuning and troubleshooting information I'd suggest reading the entire thread. http://www.digitalcorvettes.com/foru...t.php?p=975879
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
|
|
|
|
06-15-2014, 09:39 AM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Nashville, TN
Posts: 42
|
Re: quadra jet ID help
Look on the drivers side, near the rear of the carb. You should see numbers stamped right in the carb body.
Most of the kits out there cover a number of carbs. I went with a NAPA kit and float. Was about $45 for both. Here are the part numbers: CRB 25784 - Carb kit CRB 2467 - Brass float |
|
|
|
|
06-15-2014, 02:03 PM
|
#4 |
|
Registered User
Join Date: Jun 2011
Location: chillicothe mo
Posts: 225
|
Re: quadra jet ID help
thanks for the help guys.
|
|
|
|
|
06-15-2014, 09:45 PM
|
#5 |
|
Registered User
Join Date: Dec 2007
Location: Modesto, Ca
Posts: 411
|
Re: quadra jet ID help
Check out you tube as well. Many fixes and tweaks for what is a really good spread bore after said fixes are done..... an often misunderstood carb.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
